9789401045513 - materials metrology and standards for structural performance de dyson, b.f.; loveday, s.; gee, m.g. (11 resultados)
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 229,09
Envío por EUR 14,10Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 284,14
Envío por EUR 3,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 346.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 223,11
Envío por EUR 62,61Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Materials metrology is the measurement science used for determining materials property data. An essential element is the symbiosis between the understanding of materials behaviour and the development of suit able measurement techniques which, throu…gh the provision of stand ards, enable design engineers and plant operators to acquire materials data of appropriate precision. This book is concerned only with those aspects of materials metrology and standards that relate to the design and performance in service ofstructuresand consumerproducts. Itdoes not consider their important role in the processing ofmaterials. Theeditorsare grateful for thecommitmentand patience oftheexperts who contributed the various chapters. In addition, help from staffin the Division ofMaterials Metrology, National Physical Laboratory,inassist ing with the task of refereeing the chapters is gratefully acknowledged. The production of this book was carried out as part of the Materials Measurement Programme of underpinning research financed by the United Kingdom Department ofTrade and Industry. Brian F. Dyson Malcolm S. Loveday MarkG. Gee Division of Materials Metrology National Physical Laboratory Teddington, TWll OLW UK CHAPTER 1 Materials metrology and standards: an introduction B. F. Dyson, M. S. Loveday and M. G. Gee 1. 1 MATERIALS ASPECTS OF STRUCTURAL DESIGN Knowledge concerning the behaviour of materials has always been vital for the success of manufactured products, but never more so than at the present time.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 336,90
Envío por EUR 29,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Tapa blanda
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 166,29
Envío por EUR 6,80Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 180,07
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Materials metrology and standards: an introduction. Mechanical testing machine criteria. Dynamic control methods. Dynamic force measurement. Strain measurement by contact methods and extensometry. Dynamic strain measu…rements. Uncertainties in uniaxial .
Idioma: Inglés
Editorial: Springer Netherlands, Springer Netherlands Okt 2012, 2012
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Materials metrology is the measurement science used for determining materials property data. An essential element is the symbiosis between the understanding of materials behaviour and the development of suit able measurement techniq…ues which, through the provision of stand ards, enable design engineers and plant operators to acquire materials data of appropriate precision. This book is concerned only with those aspects of materials metrology and standards that relate to the design and performance in service ofstructuresand consumerproducts. Itdoes not consider their important role in the processing ofmaterials. Theeditorsare grateful for thecommitmentand patience oftheexperts who contributed the various chapters. In addition, help from staffin the Division ofMaterials Metrology, National Physical Laboratory,inassist ing with the task of refereeing the chapters is gratefully acknowledged. The production of this book was carried out as part of the Materials Measurement Programme of underpinning research financed by the United Kingdom Department ofTrade and Industry. Brian F. Dyson Malcolm S. Loveday MarkG. Gee Division of Materials Metrology National Physical Laboratory Teddington, TWll OLW UK CHAPTER 1 Materials metrology and standards: an introduction B. F. Dyson, M. S. Loveday and M. G. Gee 1. 1 MATERIALS ASPECTS OF STRUCTURAL DESIGN Knowledge concerning the behaviour of materials has always been vital for the success of manufactured products, but never more so than at the present time. 344 pp. Englisch.
Más imágenes- Tapa blanda
- Impresión bajo demanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 186,70
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Materials Metrology and Standards for Structural Performance | B. F. Dyson (u. a.) | Taschenbuch | xiii | Englisch | 2012 | Springer | EAN 9789401045513 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter:… preigu Print on Demand.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Materials metrology is the measurement science used for determining materials property data. An essential element is the symbiosis between the understanding of materials behaviour and the development of suit able measurement techniques…which, through the provision of stand ards, enable design engineers and plant operators to acquire materials data of appropriate precision. This book is concerned only with those aspects of materials metrology and standards that relate to the design and performance in service ofstructuresand consumerproducts. Itdoes not consider their important role in the processing ofmaterials. Theeditorsare grateful for thecommitmentand patience oftheexperts who contributed the various chapters. In addition, help from staffin the Division ofMaterials Metrology, National Physical Laboratory,inassist ing with the task of refereeing the chapters is gratefully acknowledged. The production of this book was carried out as part of the Materials Measurement Programme of underpinning research financed by the United Kingdom Department ofTrade and Industry. Brian F. Dyson Malcolm S. Loveday MarkG. Gee Division of Materials Metrology National Physical Laboratory Teddington, TWll OLW UK CHAPTER 1 Materials metrology and standards: an introduction B. F. Dyson, M. S. Loveday and M. G. Gee 1. 1 MATERIALS ASPECTS OF STRUCTURAL DESIGN Knowledge concerning the behaviour of materials has always been vital for the success of manufactured products, but never more so than at the present time.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 344 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 303,56
Envío por EUR 7,65Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 346 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 303,53
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 346.
