Isbn: 9786207450022 - arduino-powered alcohol detection and engine turnoff system: arduino-based automobile safety system with mq-3 sensor for breath-alcohol detection, lm35 amplification (8 resultados)

Condición: New.

Taschenbuch. Condición: Neu. Arduino-Powered Alcohol Detection and Engine Turnoff System | Arduino-Based Automobile Safety System with MQ-3 Sensor for Breath-Alcohol Detection, LM35 Amplification | Mahalakshmi G. (u. a.) | Taschenbuch | Englisch | 2023 | LAP LAMBERT Academic Publishing | EAN 9786207450022 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: New. Print on Demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 52 pp. Englisch.

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This Prototype is designed to Turn off the automobile and Inhibit it from starting in case alcohol is detected in the breath of the driver. A MQ-3 sensor is used to detect the vapours of alcohol, It in turn produces a voltage proportional to the percentage of alcohol in the breath of the driver.This voltage is harnessed and amplified using an LM35 IC to produce an output voltage in a scale of 5V. A bias voltage of 5V is given to the IC.Thus(voltage/5)\*100 gives the percentage of alcohol in the driver's breath.This voltage is read by the Arduino Micro Controller using the command 'analog read (sensor pin)' If the percentage of alcohol in driver's breath is more than 50% then the 13th digital pin of the Arduino is turned to a logic HIGH which in further stages can be amplified to trigger the relay.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This Prototype is designed to Turn off the automobile and Inhibit it from starting in case alcohol is detected in the breath of the driver. A MQ-3 sensor is used to detect the vapours of alcohol, It in turn produces a voltage proportional to the percentage of alcohol in the breath of the driver.This voltage is harnessed and amplified using an LM35 IC to produce an output voltage in a scale of 5V. A bias voltage of 5V is given to the IC.Thus(voltage/5)\*100 gives the percentage of alcohol in the driver's breath.This voltage is read by the Arduino Micro Controller using the command 'analog read (sensor pin)' If the percentage of alcohol in driver's breath is more than 50% then the 13th digital pin of the Arduino is turned to a logic HIGH which in further stages can be amplified to trigger the relay.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 52 pp. Englisch.…