Isbn: 9786202524834 - development of al -mos2 mmc and modelling of machining parameters with (8 resultados)

Condición: New.

Taschenbuch. Condición: Neu. Development of Al -MoS2 MMC and modelling of machining parameters with | Geeta Rani Madireddy (u. a.) | Taschenbuch | 120 S. | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786202524834 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.…

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Wire cut Electric Discharge Machining (WEDM) is an vital technology, which is required for high - speed cutting and high - precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this work is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061 / MoS2 metal matrix composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5mm to 80mm. The surface roughness value was measured using Talysurf. The material removal rate (MRR) was computed by measuring cutting width using Profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and Surface roughness by using Origin software. 120 pp. Englisch.…

Condición: New. Print on Demand.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Madireddy Geeta RaniDr. Geeta Rani is currently working as a teaching faculty in ALIET, Vijayawada.She odtained her bachelors degree from JNTU , Hyderbad, Master Degree from VR Siddhartha Engg. College and Ph.D from K L University, V.…

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Wire cut Electric Discharge Machining (WEDM) is an vital technology, which is required for high - speed cutting and high - precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this work is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061 / MoS2 metal matrix composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5mm to 80mm. The surface roughness value was measured using Talysurf. The material removal rate (MRR) was computed by measuring cutting width using Profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and Surface roughness by using Origin software.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Wire cut Electric Discharge Machining (WEDM) is an vital technology, which is required for high - speed cutting and high - precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this work is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061 / MoS2 metal matrix composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5mm to 80mm. The surface roughness value was measured using Talysurf. The material removal rate (MRR) was computed by measuring cutting width using Profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and Surface roughness by using Origin software.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 120 pp. Englisch.…