Isbn: 9786200474704 - preparation and characterization of cds/cdte device for x-ray sensing: chemical bath deposition and electrodeposition techiques for preparation of thin films cds/cdte x-ray sensor (8 resultados)

Condición: New.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Ionizing radiation detectors mainly depend on materials that had been fabricated decades ago, they were made by single crystal scintillators cesium and sodium iodide (CsI, NaI) or semiconductors like silicon (Si), high purity germanium (HPGe), and gas-filled tubes. However, the existing materials have some disadvantages, NaI(Tl) has poor resolution, (Si) has poor efficiency, while (HPGe) demands cooling system and all of them are high cost. In recent years, an international effort has been invested in developing a range of compound semiconductors with wide band gap and high atomic number for X and gamma ray detectors. Among the compound semiconductors, cadmium telluride (CdTe) is one of the most promising materials for radiation detectors with good energy resolution, high detection efficiency and room temperature operation. In this book, a stacked X-ray detector was fabricated, in which Mo/CdTe/CdS/FTO devices are stacked together and operated as a single detector. The work focused on optimizing the preparation of cadmium sulfide (CdS) thick film by CBD onto FTO glass substrate as well as optimizing the electrodeposition of CdTe onto the prepared CdS/FTO glass substrate. 116 pp. Englisch.…

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Ionizing radiation detectors mainly depend on materials that had been fabricated decades ago, they were made by single crystal scintillators cesium and sodium iodide (CsI, NaI) or semiconductors like silicon (Si), high purity germanium (HPGe), and gas-filled tubes. However, the existing materials have some disadvantages, NaI(Tl) has poor resolution, (Si) has poor efficiency, while (HPGe) demands cooling system and all of them are high cost. In recent years, an international effort has been invested in developing a range of compound semiconductors with wide band gap and high atomic number for X and gamma ray detectors. Among the compound semiconductors, cadmium telluride (CdTe) is one of the most promising materials for radiation detectors with good energy resolution, high detection efficiency and room temperature operation. In this book, a stacked X-ray detector was fabricated, in which Mo/CdTe/CdS/FTO devices are stacked together and operated as a single detector. The work focused on optimizing the preparation of cadmium sulfide (CdS) thick film by CBD onto FTO glass substrate as well as optimizing the electrodeposition of CdTe onto the prepared CdS/FTO glass substrate.…

Condición: New. Print on Demand.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Shams HishamDr Hisham Shams - PhD in the nuclear and radiation engineering, 22 year work experience in the field of radiation measurements, radiation safety.Ionizing radiation detectors mainly depend on materials that had been fa.…

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Ionizing radiation detectors mainly depend on materials that had been fabricated decades ago, they were made by single crystal scintillators cesium and sodium iodide (CsI, NaI) or semiconductors like silicon (Si), high purity germanium (HPGe), and gas-filled tubes. However, the existing materials have some disadvantages, NaI(Tl) has poor resolution, (Si) has poor efficiency, while (HPGe) demands cooling system and all of them are high cost. In recent years, an international effort has been invested in developing a range of compound semiconductors with wide band gap and high atomic number for X and gamma ray detectors. Among the compound semiconductors, cadmium telluride (CdTe) is one of the most promising materials for radiation detectors with good energy resolution, high detection efficiency and room temperature operation. In this book, a stacked X-ray detector was fabricated, in which Mo/CdTe/CdS/FTO devices are stacked together and operated as a single detector. The work focused on optimizing the preparation of cadmium sulfide (CdS) thick film by CBD onto FTO glass substrate as well as optimizing the electrodeposition of CdTe onto the prepared CdS/FTO glass substrate.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 116 pp. Englisch.…

Taschenbuch. Condición: Neu. Preparation and Characterization of CdS/CdTe Device for X-Ray Sensing | Chemical Bath Deposition and Electrodeposition Techiques for Preparation of Thin Films CdS/CdTe X-Ray Sensor | Hisham Shams (u. a.) | Taschenbuch | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786200474704 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu Print on Demand.…