Isbn: 9783846551271 - research problems in mechanical engineering: transitional stresses (9 resultados)

Condición: New.

Taschenbuch. Condición: Neu. Research Problems in Mechanical Engineering | Transitional Stresses | Pankaj Thakur | Taschenbuch | 84 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783846551271 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Research Problems in Mechanical Engineering has been solved by Using Seths, B.R. Theory. From chapter seven, It has been seen that higher value angular speed required for disc without edge loading. With the effect of edge loading disc required lower angular speed. It has been seen that for incompressible material required higher angular speed for initial yielding as compare to disc made of compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore. From Chapter Eight,It is found that the anisotropy of the material has little effect on radial stress but the effect is more prominent on the axial and tangential stresses for higher ratio of anisotropic constants along the radius. The results indicate the maximum stress is not always on the surface. 84 pp. Englisch.…

Condición: New. Print on Demand.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Research Problems in Mechanical Engineering has been solved by Using Seths, B.R. Theory. From chapter seven, It has been seen that higher value angular speed required for disc without edge loading. With the effect of edge loading disc required lower angular speed. It has been seen that for incompressible material required higher angular speed for initial yielding as compare to disc made of compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore. From Chapter Eight,It is found that the anisotropy of the material has little effect on radial stress but the effect is more prominent on the axial and tangential stresses for higher ratio of anisotropic constants along the radius. The results indicate the maximum stress is not always on the surface.…

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Thakur PankajDr Pankaj, Sr. A.P. & Research Coordinator, Department Of Mathematics, Indus International University Una, Himachal Pradesh, India, Honorary Fellow awarded by Australian Institute of High Energetic Material, 2011 Editor .…

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Research Problems in Mechanical Engineering has been solved by Using Seths, B.R. Theory. From chapter seven, It has been seen that higher value angular speed required for disc without edge loading. With the effect of edge loading disc required lower angular speed. It has been seen that for incompressible material required higher angular speed for initial yielding as compare to disc made of compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore. From Chapter Eight,It is found that the anisotropy of the material has little effect on radial stress but the effect is more prominent on the axial and tangential stresses for higher ratio of anisotropic constants along the radius. The results indicate the maximum stress is not always on the surface.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 84 pp. Englisch.…