9783540165927 - simulation of metal forming processes by the finite element method (simop-i): proceedings of the i. international workshop stuttgart, june 3, 1985: 85 ... umformtechnik der universität stuttgart, 85) de lange, kurt (10 resultados)
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 122,13
Envío por EUR 2,28Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 115,49
Envío por EUR 13,86Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 130,88
Envío por EUR 2,28Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New.
- Tapa blanda
Librería: Revaluation Books, Exeter, , Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 151,99
Envío por EUR 11,57Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Paperback. Condición: Brand New. 324 pages. 8.27x5.83x0.73 inches. In Stock.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 95,70
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Simulation of Metal Forming Processes by the Finite Element Method (SIMOP-I) | Proceedings of the I. International Workshop Stuttgart, June 3, 1985 | Kurt Lange | Taschenbuch | 320 S. | Englisch | 1986 | Springer | EAN 9783540165927 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergarte…nstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 62,11Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The production-costs of formed workpieces are in an increasing extent fixed through the costs for designing and manufacturing the tools. Nowadays, it is possi b 1 e to reduce these redundant tool-costs by app lyi ng modern numeri ca 1 simulation te…chniques such as the finite element type procedures. In thi s context, the basic ojecti ve of the workshop SUtoP (~imul ation of !:!etal F~rming ~rocesses by the Finite Element Method) was to determine and - especially - to discuss the level of finite-element-simulations of metal-forming processes with regard to technological utilization. On this purpose, eight presentations have been selected to focus the discussions onto the prime aspects such as: - technological aspects (bulk metal forming versus sheet metal forming), - constitutive laws (rigid-plastic versus elastic-plastic versus visko-pl- tic material laws), - coupled analysis (thermo-mechanical coupling), - kinematical description (Eulerian versus Lagrangian formulations, co-ro- tional formulations etc.), - numerical problems (incompressibility, integration of constitutive eq- tions, iterative and incremental schemas, etc.), as well as - contact problems (friction, heat-transfer, etc.). In order to promote discussions, the audience of the workshop was limited to 50 participants. Due to this fact, we had to refuse unfortunately many app 1 i cat ions. However, we hope that these proceedi ngs - whi ch also inc 1 ude the discussions in an almost complete extent - will be a compensation for those who could not attend the workshop SIMOP-I.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Bueno
EUR 163,31
Envío por EUR 28,93Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Very Good. Very Good. book.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 112,34
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The production-costs of formed workpieces are in an increasing extent fixed through the costs for designing and manufacturing the tools. Nowadays, it is possi b 1 e to reduce these redundant tool-costs by app lyi ng modern numeri ca… 1 simulation techniques such as the finite element type procedures. In thi s context, the basic ojecti ve of the workshop SUtoP (~imul ation of !:!etal F~rming ~rocesses by the Finite Element Method) was to determine and - especially - to discuss the level of finite-element-simulations of metal-forming processes with regard to technological utilization. On this purpose, eight presentations have been selected to focus the discussions onto the prime aspects such as: - technological aspects (bulk metal forming versus sheet metal forming), - constitutive laws (rigid-plastic versus elastic-plastic versus visko-pl- tic material laws), - coupled analysis (thermo-mechanical coupling), - kinematical description (Eulerian versus Lagrangian formulations, co-ro- tional formulations etc.), - numerical problems (incompressibility, integration of constitutive eq- tions, iterative and incremental schemas, etc.), as well as - contact problems (friction, heat-transfer, etc.). In order to promote discussions, the audience of the workshop was limited to 50 participants. Due to this fact, we had to refuse unfortunately many app 1 i cat ions. However, we hope that these proceedi ngs - whi ch also inc 1 ude the discussions in an almost complete extent - will be a compensation for those who could not attend the workshop SIMOP-I. 324 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, , Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 92,27
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Opening Address.- Session 1: Bulk Metal Forming.- Session la. Chairman: E. Steck.- Thermomechanical Analysis of Metal Forming Processes Through the Combined Approach FEM/FDM.- Finite-Element-Simulation of Metal Formin…g Processes Using Two Different Material.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Opening Address.- Session 1: Bulk Metal Forming.- Session la. Chairman: E. Steck.- Thermomechanical Analysis of Metal Forming Processes Through the Combined Approach FEM/FDM.- Finite-Element-Simulation of Metal Forming Processes Using T…wo Different Material-Laws.- Discussions (Session la).- Session lb. Chairman: O. Mahrenholtz.- Elastic-Plastic Three-Dimensional Finite-Element Analysis of Bulk Metal Forming Processes.- Three-Dimensional Thermomechanical Analysis of Metal Forming Processes.- Discussions (Session lb).- Session 2: Sheet Metal Forming.- Session 2a. Chairman: E. Ramm.- Numerical Simulation of Stretch Forming Processes.- Possibilities of the Finite Element Viscous Shell Approach for Analysis of Thin Sheet Metal Forming Problems.- Discussions (Session 2a).- Session 2b. Chairman: J.H. Argyris.- Numerical Simulation of the Axisymmetric Deep-Drawing Process by the FEM.- Applications of the Finite-Element-Method to Sheet Metal Flanging Operations.- Discussions (Session 2b).- Forum.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 324 pp. Englisch.
