9783032072467 - thin-walled structures with initial stresses: multiscale analysis of classical and non-classical problems (mathematical engineering) de kolpakov, alexander (7 resultados)
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 231,68
Envío por EUR 3,45Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 171,19
Envío por EUR 62,89Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is based on two principles:- the problem for an elastic body with initial stresses is similar to the elasticity theory problem, but the coefficients of the equations relating additional stresses and additional strains do not have all the symmetr…ies incident to the elastic constants.- since the problems of thin-walled structures are asymptotic in nature, asymptotic methods (including homogenization theory if the structure is non-uniform) should be used to analyze the problems.Following these principles, one can derive the theory of inhomogeneous/composite structural elements directly from the elasticity theory without to use any additional/simplified hypothesis.This book treats both homogeneous and non-uniform plates and beams. The chapters on uniform plates and beams may be considered as an alternative method deriving the classical stability equations.The main part of the book is devoted to non-uniform plates and beams. When performing the analysis of the problems, three possible ranges of initial stresses are distinguished, which correspond to:- in-plane forces in a plate and axial force in a beam (this is the case of Euler and Bryan forces);- moments (it happens that the moments of initial stresses influence beams and do not influence plates);- stresses of the order of elastic constants (which arise, for example, as a result of thermal heating), which affect elastic constants of plates and beams.Local stresses are recorded for all the considered cases. It makes possible to apply the results presented in the book both to the problem of stability and the strength analysis of the structural elements with initial tresses.
- Tapa dura
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 144,94
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.
- Tapa dura
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 171,19
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book is based on two principles:- the problem for an elastic body with initial stresses is similar to the elasticity theory problem, but the coefficients of the equations relating additional stresses and additional strains do not have… all the symmetries incident to the elastic constants.- since the problems of thin-walled structures are asymptotic in nature, asymptotic methods (including homogenization theory if the structure is non-uniform) should be used to analyze the problems.Following these principles, one can derive the theory of inhomogeneous/composite structural elements directly from the elasticity theory without to use any additional/simplified hypothesis.This book treats both homogeneous and non-uniform plates and beams. The chapters on uniform plates and beams may be considered as an alternative method deriving the classical stability equations.The main part of the book is devoted to non-uniform plates and beams. When performing the analysis of the problems, three possible ranges of initial stresses are distinguished, which correspond to:- in-plane forces in a plate and axial force in a beam (this is the case of Euler and Bryan forces);- moments (it happens that the moments of initial stresses influence beams and do not influence plates);- stresses of the order of elastic constants (which arise, for example, as a result of thermal heating), which affect elastic constants of plates and beams.Local stresses are recorded for all the considered cases. It makes possible to apply the results presented in the book both to the problem of stability and the strength analysis of the structural elements with initial tresses. 227 pp. Englisch.
- Tapa dura
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 171,19
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book is based on two principles: the problem for an elastic body with initial stresses is similar to the elasticity theory problem, but the coefficients of the equations relating additional stresses and additional strains do not have all…the symmetries incident to the elastic constants. since the problems of thin-walled structures are asymptotic in nature, asymptotic methods (including homogenization theory if the structure is non-uniform) should be used to analyze the problems.Following these principles, one can derive the theory of inhomogeneous/composite structural elements directly from the elasticity theory without to use any additional/simplified hypothesis.This book treats both homogeneous and non-uniform plates and beams. The chapters on uniform plates and beams may be considered as an alternative method deriving the classical stability equations.The main part of the book is devoted to non-uniform plates and beams. When performing the analysis of the problems, three possible ranges of initial stresses are distinguished, which correspond to: in-plane forces in a plate and axial force in a beam (this is the case of Euler and Bryan forces); moments (it happens that the moments of initial stresses influence beams and do not influence plates); stresses of the order of elastic constants (which arise, for example, as a result of thermal heating), which affect elastic constants of plates and beams.Local stresses are recorded for all the considered cases. It makes possible to apply the results presented in the book both to the problem of stability and the strength analysis of the structural elements with initial tresses.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 244 pp. Englisch.
- Tapa dura
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 242,11
Envío por EUR 7,60Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand.
- Tapa dura
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 246,71
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND.
