9781854862327 - milling: a complete course (workshop practice) de hall, harold (23 resultados)
Idioma: Inglés
Editorial: Specialist Interest Model Books ltd (edition 41800th), 2004
- Tapa blanda
Librería: BooksRun, Philadelphia, PA, Estados Unidos de AmericaBooksRun
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 6,25
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Very Good. 41800th. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.
- Tapa blanda
Librería: World of Books (was SecondSale), Montgomery, IL, Estados Unidos de AmericaWorld of Books (was SecondSale)
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Aceptable
EUR 9,58
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Good. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc.
- Tapa blanda
Librería: SVFOL Bookstore, Sierra Vista, AZ, Estados Unidos de AmericaSVFOL Bookstore
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Bueno
EUR 7,14
Envío por EUR 4,97Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
paperback. Condición: Very Good. LIKE NEW / VERY GOOD - No creases or tears on spine and/or cover LIKE NEW / VERY GOOD - No missing or damaged pages LIKE NEW / VERY GOOD - No text or writing on the pages or in the margins LIKE NEW / VERY GOOD - No underlining or highlighting of text VERY GOOD - Cover has very minimal wear and te…ar with no obvious damage VERY GOOD - Zero to Limited corner dings and/or curled corners All items shipped Monday - Friday, fast shipping! Proceeds support the Sierra Vista Public Library.
- Tapa blanda
Librería: WorldofBooks, Goring-By-Sea, WS, Reino UnidoWorldofBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 6,14
Envío por EUR 6,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Paperback. Condición: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
- Tapa blanda
Librería: HPB-Diamond, Dallas, TX, Estados Unidos de AmericaHPB-Diamond
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 9,80
Envío por EUR 3,25Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Very Good. Connecting readers with great books since 1972! Used books may not include companion materials, and may have some shelf wear or limited writing. We ship orders daily and Customer Service is our top priority.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 2004
- Tapa blanda
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de AmericaGrand Eagle Retail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 17,67
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. Through the pages of Model Engineers' Workshop magazine, author Harold Hall, has established a reputation for introducing the tyro model engineer to a wide range of machine tool operations. In this book he introduces the milling machine. This book assumes no previous experience of using the…milling machine and through the medium of four minor and four major projects will lead prospective users of the milling machine through all of the techniques involved. Whilst the detailed descriptions in the book are aimed primarily at those wishing to extend their knowledge of milling, the projects will be of use to the experienced operator wishing to add to their workshop equipment. All of the projects are extensively illustrated and include full workshop drawings. Once followed through, the reader will have amassed a wealth of practical skills and added a number of useful items to his range of workshop equipment. A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers' Workshop magazine's leading authorities. Eight projects lead prospective model engineers through all of the techniques involved; each project is extensively illustrated with step-by-step photographs and workshop drawings. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
- Tapa blanda
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 17,69
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: New. Through the pages of Model Engineers' Workshop magazine, author Harold Hall, has established a reputation for introducing the tyro model engineer to a wide range of machine tool operations. In this book he introduces the milling machine. This book assumes no previous experience of using the milling mac…hine and through the medium of four minor and four major projects will lead prospective users of the milling machine through all of the techniques involved. Whilst the detailed descriptions in the book are aimed primarily at those wishing to extend their knowledge of milling, the projects will be of use to the experienced operator wishing to add to their workshop equipment. All of the projects are extensively illustrated and include full workshop drawings. Once followed through, the reader will have amassed a wealth of practical skills and added a number of useful items to his range of workshop equipment.
- Tapa blanda
Librería: Bank of Books, Ventura, CA, Estados Unidos de AmericaBank of Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 14,19
Envío por EUR 3,68Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
paperback. Condición: New. We have 75,000 books to choose from -- Ship within 24 hours -- Satisfaction Guaranteed.
- Tapa blanda
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,28
Envío por EUR 3,85Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 12,04
Envío por EUR 11,70Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 3 disponibles
Paperback. Condición: Brand New. illustrated edition. 144 pages. 8.25x6.00x0.50 inches. In Stock.
- Tapa blanda
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,06
Envío por EUR 9,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. 2004. Paperback. A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers' Workshop magazine's leading authorities. Eight projects lead prospective model engineers through all of the techniques involved; each project is extensively illustrated with step-by-st…ep photographs and workshop drawings. Series: Workshop Practice. Num Pages: 144 pages, 117 black and white photographs; 111 scale plans & line drawings. BIC Classification: TB. Category: (G) General (US: Trade); (U) Tertiary Education (US: College). Dimension: 216 x 149 x 10. Weight in Grams: 198. . . . . .
- Tapa blanda
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 18,85
Envío por EUR 9,09Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. 2004. Paperback. A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers' Workshop magazine's leading authorities. Eight projects lead prospective model engineers through all of the techniques involved; each project is extensively illustrated with step-by-st…ep photographs and workshop drawings. Series: Workshop Practice. Num Pages: 144 pages, 117 black and white photographs; 111 scale plans & line drawings. BIC Classification: TB. Category: (G) General (US: Trade); (U) Tertiary Education (US: College). Dimension: 216 x 149 x 10. Weight in Grams: 198. . . . . . Books ship from the US and Ireland.
- Tapa blanda
Librería: Chiron Media, Wallingford, Reino UnidoChiron Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 11,46
Envío por EUR 18,13Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New.
- Tapa blanda
Librería: CARDINAL BOOKS ~~ ABAC/ILAB, London -- Birr, ON, CanadaCARDINAL BOOKS ~~ ABAC/ILAB
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Muy bueno
EUR 15,36
Envío por EUR 17,28Se envía de Canada a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Soft cover. Condición: Near Fine. Softcover. Clean, tight, and unmarked. Very neat--a sound and handsome copy. Size: 8vo - over 7¾ - 9¾" tall. Book.
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 16,25
Envío por EUR 17,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 18 disponibles
Condición: New.
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 17,04
Envío por EUR 17,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 18 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa blanda
Librería: Chapter 1, Johannesburg, GAU, Sur AfricaChapter 1
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 9,81
Envío por EUR 25,00Se envía de Sur Africa a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Softcover. Condición: Very Good. Reprint . Publication of 144 pages. The wraps are in very good condition. Internally the pages are clean and complete. The binding is excellent. GK. Our orders are shipped using tracked courier delivery services.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 2004
- Tapa blanda
Librería: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 25,56
Envío por EUR 32,04Se envía de Australia a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. Through the pages of Model Engineers' Workshop magazine, author Harold Hall, has established a reputation for introducing the tyro model engineer to a wide range of machine tool operations. In this book he introduces the milling machine. This book assumes no previous experience of using the…milling machine and through the medium of four minor and four major projects will lead prospective users of the milling machine through all of the techniques involved. Whilst the detailed descriptions in the book are aimed primarily at those wishing to extend their knowledge of milling, the projects will be of use to the experienced operator wishing to add to their workshop equipment. All of the projects are extensively illustrated and include full workshop drawings. Once followed through, the reader will have amassed a wealth of practical skills and added a number of useful items to his range of workshop equipment. A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers' Workshop magazine's leading authorities. Eight projects lead prospective model engineers through all of the techniques involved; each project is extensively illustrated with step-by-step photographs and workshop drawings. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Idioma: Inglés
Editorial: Fox Chapel Publishers International, Hemel Hempstead, 2004
- Tapa blanda
Librería: CitiRetail, Stevenage, Reino UnidoCitiRetail
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 21,68
Envío por EUR 43,30Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: new. Paperback. Through the pages of Model Engineers' Workshop magazine, author Harold Hall, has established a reputation for introducing the tyro model engineer to a wide range of machine tool operations. In this book he introduces the milling machine. This book assumes no previous experience of using the…milling machine and through the medium of four minor and four major projects will lead prospective users of the milling machine through all of the techniques involved. Whilst the detailed descriptions in the book are aimed primarily at those wishing to extend their knowledge of milling, the projects will be of use to the experienced operator wishing to add to their workshop equipment. All of the projects are extensively illustrated and include full workshop drawings. Once followed through, the reader will have amassed a wealth of practical skills and added a number of useful items to his range of workshop equipment. A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers' Workshop magazine's leading authorities. Eight projects lead prospective model engineers through all of the techniques involved; each project is extensively illustrated with step-by-step photographs and workshop drawings. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
- Tapa blanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 17,69
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers Workshop magazine s leading authorities. Eight projects lead prospective model engineers through all of the techniques involved each project is.
Idioma: Inglés
Editorial: Fox Chapel Publishers International Mai 2004, 2004
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 12,49
Envío por EUR 63,32Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. Neuware - Through the pages of Model Engineers'' Workshop magazine, author Harold Hall, has established a reputation for introducing the tyro model engineer to a wide range of machine tool operations. In this book he introduces the milling machine. This book assumes no previous experience of using th…e milling machine and through the medium of four minor and four major projects will lead prospective users of the milling machine through all of the techniques involved. Whilst the detailed descriptions in the book are aimed primarily at those wishing to extend their knowledge of milling, the projects will be of use to the experienced operator wishing to add to their workshop equipment. All of the projects are extensively illustrated and include full workshop drawings. Once followed through, the reader will have amassed a wealth of practical skills and added a number of useful items to his range of workshop equipment.
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 18,05
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Milling - A Complete Course | Harold Hall | Taschenbuch | Workshop Practice Series | Kartoniert / Broschiert | Englisch | 2004 | Fox Chapel Publishers International | EAN 9781854862327 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter:… preigu.
- Tapa blanda
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 13,87
Envío por EUR 76,06Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: New. Through the pages of Model Engineers' Workshop magazine, author Harold Hall, has established a reputation for introducing the tyro model engineer to a wide range of machine tool operations. In this book he introduces the milling machine. This book assumes no previous experience of using the milling mac…hine and through the medium of four minor and four major projects will lead prospective users of the milling machine through all of the techniques involved. Whilst the detailed descriptions in the book are aimed primarily at those wishing to extend their knowledge of milling, the projects will be of use to the experienced operator wishing to add to their workshop equipment. All of the projects are extensively illustrated and include full workshop drawings. Once followed through, the reader will have amassed a wealth of practical skills and added a number of useful items to his range of workshop equipment.
