9781848827479 - rapid modelling for increasing competitiveness: tools and mindset (10 resultados)
- Tapa dura
Librería: Phatpocket Limited, Waltham Abbey, HERTS, Reino UnidoPhatpocket Limited
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 63,02
Envío por EUR 12,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Like New. Used - Like New. Book is new and unread but may have minor shelf wear. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.
- Tapa dura
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 227,10
Envío por EUR 13,97Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 217,46
Envío por EUR 63,32Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term 'Rapid Modeling' to denote queuing modeling of manufacturing syst…ems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent.
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 305,35
Envío por EUR 14,58Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Brand New. 1st edition. 309 pages. 9.25x6.25x0.75 inches. In Stock.
- Tapa dura
- Impresión bajo demanda
Librería: Basi6 International, Irving, TX, Estados Unidos de AmericaBasi6 International
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 175,84
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 10 disponibles
Condición: Brand New. New. US edition. Print on demand title. Delivery takes 20-25 days. Excellent Customer Service.
- Tapa dura
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 166,29
Envío por EUR 6,80Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.
- Tapa dura
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 180,07
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Provides an overview of the state of the art in rapid modeling for integrated demand and supply managementGerald Reiner studied Business Administration in Vienna after an education in Industrial Engineering. In 2001 h…e received his Doctorate i.
- Tapa dura
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term 'Rapid Modeling' to denote queuing modeling of ma…nufacturing systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent. 332 pp. Englisch.
Más imágenes- Tapa dura
- Impresión bajo demanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 186,70
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Buch. Condición: Neu. Rapid Modelling for Increasing Competitiveness | Tools and Mindset | Gerald Reiner | Buch | xxii | Englisch | 2009 | Springer | EAN 9781848827479 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print…on Demand.
- Tapa dura
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term ¿Rapid Modeling¿ to denote queuing modeling of manufa…cturing systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 332 pp. Englisch.
