9781475756906 - machining impossible shapes: ifip tc5 wg5.3 international conference on sculptured surface machining (ssm98) november 9–11, 1998 chrysler technology ... in information and communication technology) (13 resultados)

- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 227,93
Envío por EUR 14,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.

Machining Impossible Shapes : Ifip Tc5 Wg5.3 International Conference on Sculptured Surface Machining (Ssm98) November 9-11, 1998 Chrysler Technology Center, Michigan, USA
Olling, Gustav J. (EDT); Choi, Byoung K. (EDT); Jerard, Robert B. (EDT)
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 239,96
Envío por EUR 2,32Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: New.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 184,95
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Machining Impossible Shapes | IFIP TC5 WG5.3 International Conference on Sculptured Surface Machining (SSM98) November 9-11, 1998 Chrysler Technology Center, Michigan, USA | Gustav J. Olling (u. a.) | Taschenbuch | IFIP Advances in Information and Communication Technology | xiv | Englisch | 2013 | Sp…ringer | EAN 9781475756906 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 285,69
Envío por EUR 3,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 400.

- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 223,11
Envío por EUR 63,02Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - On November 9-11, 1998,85 participants, representing 17 countries, gathered in Aubum Hills, Michigan, at the Chrysler Tech Center, to attend a workshop 'SSM'98' (or Sculptured Surface Machining '98) organized by IFIP Working Group 5.3. This was the… first major workshop on sculptured surface machining since the CAM-I sponsored conference 'Machining Impossible Surfaces' held in 1981. The purpose of the SSM'98 workshop, entitled 'Machining Impossible Shapes', was to promote a cross-fertilization of ideas among three communities: industrial users, CAM software developers and academic researchers. There were 17 participants who were 'industrial users', 15 represented CAM software developers, 4 were from the machine tool industry, with the remainder being academic researchers. The format of the meeting included 40 presentations in 9 sessions, 4 keynote speeches and a sufficient amount of time for informal discussion amongst the participants. One of the most valuable aspects of the workshop was the opportunity for participants to meet informally and to discuss their mutual interests. This led to two 'participant organized' sessions on five axis machining and on machine tool controllers.

- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 294,20
Envío por EUR 29,27Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. Like New. book.

Machining Impossible Shapes : Ifip Tc5 Wg5.3 International Conference on Sculptured Surface Machining (Ssm98) November 9-11, 1998 Chrysler Technology Center, Michigan, USA
Olling, Gustav J. (EDT); Choi, Byoung K. (EDT); Jerard, Robert B. (EDT)
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 331,96
Envío por EUR 2,32Se envía dentro de Estados Unidos de AmericaCantidad disponible: 15 disponibles
Condición: As New. Unread book in perfect condition.

- Tapa blanda
- Impresión bajo demanda
Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 166,29
Envío por EUR 6,80Se envía de Italia a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: new. Questo è un articolo print on demand.

- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 180,07
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. On November 9-11, 1998,85 participants, representing 17 countries, gathered in Aubum Hills, Michigan, at the Chrysler Tech Center, to attend a workshop SSM 98 (or Sculptured Surface Machining 98) organized by IFIP Wor…king Group 5.3. This was the first ma.

- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -On November 9-11, 1998,85 participants, representing 17 countries, gathered in Aubum Hills, Michigan, at the Chrysler Tech Center, to attend a workshop 'SSM'98' (or Sculptured Surface Machining '98) organized by IFIP Working Group 5….3. This was the first major workshop on sculptured surface machining since the CAM-I sponsored conference 'Machining Impossible Surfaces' held in 1981. The purpose of the SSM'98 workshop, entitled 'Machining Impossible Shapes', was to promote a cross-fertilization of ideas among three communities: industrial users, CAM software developers and academic researchers. There were 17 participants who were 'industrial users', 15 represented CAM software developers, 4 were from the machine tool industry, with the remainder being academic researchers. The format of the meeting included 40 presentations in 9 sessions, 4 keynote speeches and a sufficient amount of time for informal discussion amongst the participants. One of the most valuable aspects of the workshop was the opportunity for participants to meet informally and to discuss their mutual interests. This led to two 'participant organized' sessions on five axis machining and on machine tool controllers. 400 pp. Englisch.

- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 213,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -On November 9-11, 1998,85 participants, representing 17 countries, gathered in Aubum Hills, Michigan, at the Chrysler Tech Center, to attend a workshop 'SSM'98' (or Sculptured Surface Machining '98) organized by IFIP Working Group 5.3.…This was the first major workshop on sculptured surface machining since the CAM-I sponsored conference 'Machining Impossible Surfaces' held in 1981. The purpose of the SSM'98 workshop, entitled 'Machining Impossible Shapes', was to promote a cross-fertilization of ideas among three communities: industrial users, CAM software developers and academic researchers. There were 17 participants who were 'industrial users', 15 represented CAM software developers, 4 were from the machine tool industry, with the remainder being academic researchers. The format of the meeting included 40 presentations in 9 sessions, 4 keynote speeches and a sufficient amount of time for informal discussion amongst the participants. One of the most valuable aspects of the workshop was the opportunity for participants to meet informally and to discuss their mutual interests. This led to two 'participant organized' sessions on five axis machining and on machine tool controllers.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 400 pp. Englisch.

- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 304,93
Envío por EUR 7,61Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 400 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 304,39
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 400.