9780863411373 - industrial digital control systems (control, robotics and sensors) de warwick, k. (15 resultados)
- Tapa dura
Librería: AwesomeBooks, Wallingford, Reino UnidoAwesomeBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 11,97
Envío por EUR 5,81Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
hardcover. Condición: Very Good. Industrial Digital Control Systems (Control, Robotics and Sensors) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well ma…intained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .
Idioma: Inglés
Editorial: Institution of Engineering and Technology -, 1988
- Tapa dura
Librería: Bahamut Media, Reading, Reino UnidoBahamut Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 11,97
Envío por EUR 8,12Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
hardcover. Condición: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.
Más imágenes- Tapa dura
Librería: Nugget Box (PBFA), Stafford, Reino UnidoNugget Box (PBFA)
Contactar con el vendedorVendedor de 5 estrellasMiembro de asociación: PBFA
Condición: Usado - Regular
EUR 29,97
Envío por EUR 16,29Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Fair. Estado de la sobrecubierta: Fair. Dust wrapper with a little edge & corner wear plus sunned spine. Name Inked on to Fore Edge. Please see images also for condition. Internally Very Good - clean and tidy copy in tight binding. Unclipped dust wrapper has now been fitted with removable archive acetate fi…lm. ** 1052g ** All orders are sent with a tracking /signature service for your peace of mind, so that you can keep tabs on your parcel. For overseas customers - on some sites we use, parcels weighing over the standard rate may incur an additional charge and we will then contact you with the additional shipping fee required. This is for the postage only we do not charge you for our time or our excellent packaging, which we are noted for. Dispatched in cardboard mailers within 24/48 Hours Mon - Friday 2pm, except bank holidays, otherwise next business day - excellent service guaranteed.; Control, Robotics and Sensors.
Idioma: Inglés
Editorial: The Institution of Engineering and Technology, 1988
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 148,26
Envío por EUR 2,27Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
Idioma: Inglés
Editorial: Institution of Engineering and Technology, GB, 1988
- Tapa dura
Librería: Rarewaves USA, HEBRON, KY, Estados Unidos de AmericaRarewaves USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 150,61
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Hardback. Condición: New. This book provides an introduction to the techniques employed in the design and implementation of digital control systems. The text has arisen out of a highly successful IEE Vacation School held annually at Oxford University and the contents have been tailored to a digestible level and breadth by means…of the feedback provided from previous School participants. As well as a tutorial approach to the description of basic concepts and general ideas used, most chapters include numerous worked examples and details of particular applications in order to enhance the theory introduced. The importance of putting over a technique by making use of practical examples is highlighted by the inclusion of several chapters in which selected case studies are presented detailing applications of both the more conventional and the more modern digital control ideas. The book is aimed at engineers, managers and engineering students who wish to become more widely informed about how they may employ the latest advances in digital control technology. To this end, earlier chapters concentrate on the theoretical framework of digital control, whereas later chapters concentrate on its implementation. This results in an up-to-date overview of digital control schemes which is an excellent reference text for industrialists and academics alike. This substantially revised 2nd edition (more than a third of the book is completely new) represents a distinct improvement on the extremely successful 1st edition, and bears witness to the constant modernisation required in such a rapidly changing area.
Idioma: Inglés
Editorial: The Institution of Engineering and Technology, 1988
- Tapa dura
Librería: California Books, Miami, FL, Estados Unidos de AmericaCalifornia Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 151,67
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
Idioma: Inglés
Editorial: The Institution of Engineering and Technology, 1988
- Tapa dura
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 161,55
Envío por EUR 2,27Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
Idioma: Inglés
Editorial: The Institution of Engineering and Technology, 1988
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 165,74
Envío por EUR 17,46Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
Idioma: Inglés
Editorial: The Institution of Engineering and Technology, 1988
- Tapa dura
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 168,76
Envío por EUR 17,46Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa dura
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 153,03
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Gebunden. Condición: New. Inhaltsverzeichnisrnrnn Chapter 1: Introduction to digital controln Chapter 2: Digital signals and systemsn Chapter 3: Digital controllers for process control applicationsn Chapter 4: Design of digital controll.
Idioma: Inglés
Editorial: Institution of Engineering and Technology, GB, 1988
- Tapa dura
Librería: Rarewaves USA United, HEBRON, KY, Estados Unidos de AmericaRarewaves USA United
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 165,75
Envío por EUR 43,05Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Hardback. Condición: New. This book provides an introduction to the techniques employed in the design and implementation of digital control systems. The text has arisen out of a highly successful IEE Vacation School held annually at Oxford University and the contents have been tailored to a digestible level and breadth by means…of the feedback provided from previous School participants. As well as a tutorial approach to the description of basic concepts and general ideas used, most chapters include numerous worked examples and details of particular applications in order to enhance the theory introduced. The importance of putting over a technique by making use of practical examples is highlighted by the inclusion of several chapters in which selected case studies are presented detailing applications of both the more conventional and the more modern digital control ideas. The book is aimed at engineers, managers and engineering students who wish to become more widely informed about how they may employ the latest advances in digital control technology. To this end, earlier chapters concentrate on the theoretical framework of digital control, whereas later chapters concentrate on its implementation. This results in an up-to-date overview of digital control schemes which is an excellent reference text for industrialists and academics alike. This substantially revised 2nd edition (more than a third of the book is completely new) represents a distinct improvement on the extremely successful 1st edition, and bears witness to the constant modernisation required in such a rapidly changing area.
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 203,80
Envío por EUR 14,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Brand New. revised subsequent edition. 544 pages. 9.00x6.25x1.25 inches. In Stock.
Idioma: Inglés
Editorial: The Institution of Engineering and Technology, 1988
- Tapa dura
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 245,46
Envío por EUR 3,44Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New.
Idioma: Inglés
Editorial: Institution Of Engineering & Technology Jun 1988, 1988
- Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 212,52
Envío por EUR 30,50Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Buch. Condición: Neu. Neuware - This book provides an introduction to the techniques employed in the design and implementation of digital control systems. The text has arisen out of a highly successful IEE Vacation School held annually at Oxford University and the contents have been tailored to a digestible level and breadth by…means of the feedback provided from previous School participants. As well as a tutorial approach to the description of basic concepts and general ideas used, most chapters include numerous worked examples and details of particular applications in order to enhance the theory introduced. The importance of putting over a technique by making use of practical examples is highlighted by the inclusion of several chapters in which selected case studies are presented detailing applications of both the more conventional and the more modern digital control ideas. The book is aimed at engineers, managers and engineering students who wish to become more widely informed about how they may employ the latest advances in digital control technology. To this end, earlier chapters concentrate on the theoretical framework of digital control, whereas later chapters concentrate on its implementation. This results in an up-to-date overview of digital control schemes which is an excellent reference text for industrialists and academics alike. This substantially revised 2nd edition (more than a third of the book is completely new) represents a distinct improvement on the extremely successful 1st edition, and bears witness to the constant modernisation required in such a rapidly changing area.
Idioma: Inglés
Editorial: The Institution of Engineering and Technology, 1988
- Tapa dura
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 253,71
Envío por EUR 7,57Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New.
