9780831136819 - Choosing & Using the Right Metal Shop Lathe de Rex, Richard (24 resultados)

Condición: New.

Condición: New.

Condición: New.

Condición: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Condición: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: New. Investing in a new metalworking lathe is a big step for any shop (especially home shops), where there's usually no one around to help. Once the lathe is up and running, you should theoretically be able to make the special items you previously did without (or paid through the nose for), such as shafts, plain, tapered or threaded discs, bearings, and so on. But if you are new to this, you'll want to know a lot more than you can learn from the salesman or the manual. Does the lathe really match your needs, and if so, how much?Choosing and Using the Right Metal Shop Lathe is an essential source of information for lathe buyers and users at every level, from mini-size tabletops up to industrial machines weighing half a ton or more. It answers the question of what else you will need to get useful work from the machine. For instance, what comes as "standard equipment" with the lathe? Most include a chuck (usually a 4-jaw independent, not the self-centering 3-jaw you'll want to use most of the time), maybe a faceplate (rarely used), and a 4-way toolholder you will probably swap right away for a more sensible design. Never included is a tailstock drill chuck, an essential accessory you will need from day one-and the same goes for actual cutting tools. Almost certainly, there won't be a digital readout (DRO), which used to be regarded as a "maybe-someday" luxury-but not anymore.The work talks about cutting oils, cutting speeds and easier-to-machine materials, and it cautions against buying sets of anything, vs. buying the one accessory you'll truly need. Finally, there are chapters on building a tailstock drill press, a special toolpost for easy screw cutting, and a precision grinder for lathe tools that can be made from oddments of material in a couple of days or less.           Features Differentiates between the truly essential features (screw-cutting) and the nice-to-have (power feeding), spindle speed selection from a gearbox (typical) or continuously variable (more convenient).Offers advice on screw-cutting US and metric threads, and handling the machinist's most trouble-prone actions, such as knurling and parting off.Provides a workpiece tutorial that demonstrates many of the commonplace lathe routines-ideal for first-time users.

Condición: New. Brand New Original US Edition. Customer service! Satisfaction Guaranteed.

Condición: New. Brand New Original US Edition. Customer service! Satisfaction Guaranteed.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

Condición: New.

Paperback. Condición: Brand New. 336 pages. 9.00x6.00x0.75 inches. In Stock.

Condición: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Condición: New. In.

Condición: New.

Condición: As New. Unread book in perfect condition.

Paperback / softback. Condición: New. New copy - Usually dispatched within 4 working days.

Paperback. Condición: New. Investing in a new metalworking lathe is a big step for any shop (especially home shops), where there's usually no one around to help. Once the lathe is up and running, you should theoretically be able to make the special items you previously did without (or paid through the nose for), such as shafts, plain, tapered or threaded discs, bearings, and so on. But if you are new to this, you'll want to know a lot more than you can learn from the salesman or the manual. Does the lathe really match your needs, and if so, how much?Choosing and Using the Right Metal Shop Lathe is an essential source of information for lathe buyers and users at every level, from mini-size tabletops up to industrial machines weighing half a ton or more. It answers the question of what else you will need to get useful work from the machine. For instance, what comes as "standard equipment" with the lathe? Most include a chuck (usually a 4-jaw independent, not the self-centering 3-jaw you'll want to use most of the time), maybe a faceplate (rarely used), and a 4-way toolholder you will probably swap right away for a more sensible design. Never included is a tailstock drill chuck, an essential accessory you will need from day one-and the same goes for actual cutting tools. Almost certainly, there won't be a digital readout (DRO), which used to be regarded as a "maybe-someday" luxury-but not anymore.The work talks about cutting oils, cutting speeds and easier-to-machine materials, and it cautions against buying sets of anything, vs. buying the one accessory you'll truly need. Finally, there are chapters on building a tailstock drill press, a special toolpost for easy screw cutting, and a precision grinder for lathe tools that can be made from oddments of material in a couple of days or less.           Features Differentiates between the truly essential features (screw-cutting) and the nice-to-have (power feeding), spindle speed selection from a gearbox (typical) or continuously variable (more convenient).Offers advice on screw-cutting US and metric threads, and handling the machinist's most trouble-prone actions, such as knurling and parting off.Provides a workpiece tutorial that demonstrates many of the commonplace lathe routines-ideal for first-time users.

Paperback. Condición: New. Brand New ! Fast Delivery "International Edition " and ship within 24-48 hours. Deliver by FedEx and Dhl, & Aramex, UPS, & USPS and we do accept APO and PO BOX Addresses. Order can be delivered worldwide within 4-6 Working days .and we do have flat rate for up to 2LB. Extra shipping charges will be requested This Item May be shipped from India, United states & United Kingdom. Depending on your location and availability.

Condición: New. &Uumlber den AutorRichard Rex has worked on lathes and milling machines since his teen years in a home shop, and later on a variety of production machines (his current home shop setup has a 12 x 36 lathe and a Bridgeport mill).

Paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Paperback. Condición: New. Investing in a new metalworking lathe is a big step for any shop (especially home shops), where there's usually no one around to help. Once the lathe is up and running, you should theoretically be able to make the special items you previously did without (or paid through the nose for), such as shafts, plain, tapered or threaded discs, bearings, and so on. But if you are new to this, you'll want to know a lot more than you can learn from the salesman or the manual. Does the lathe really match your needs, and if so, how much?Choosing and Using the Right Metal Shop Lathe is an essential source of information for lathe buyers and users at every level, from mini-size tabletops up to industrial machines weighing half a ton or more. It answers the question of what else you will need to get useful work from the machine. For instance, what comes as "standard equipment" with the lathe? Most include a chuck (usually a 4-jaw independent, not the self-centering 3-jaw you'll want to use most of the time), maybe a faceplate (rarely used), and a 4-way toolholder you will probably swap right away for a more sensible design. Never included is a tailstock drill chuck, an essential accessory you will need from day one-and the same goes for actual cutting tools. Almost certainly, there won't be a digital readout (DRO), which used to be regarded as a "maybe-someday" luxury-but not anymore.The work talks about cutting oils, cutting speeds and easier-to-machine materials, and it cautions against buying sets of anything, vs. buying the one accessory you'll truly need. Finally, there are chapters on building a tailstock drill press, a special toolpost for easy screw cutting, and a precision grinder for lathe tools that can be made from oddments of material in a couple of days or less.           Features Differentiates between the truly essential features (screw-cutting) and the nice-to-have (power feeding), spindle speed selection from a gearbox (typical) or continuously variable (more convenient).Offers advice on screw-cutting US and metric threads, and handling the machinist's most trouble-prone actions, such as knurling and parting off.Provides a workpiece tutorial that demonstrates many of the commonplace lathe routines-ideal for first-time users.

Paperback. Condición: New. Investing in a new metalworking lathe is a big step for any shop (especially home shops), where there's usually no one around to help. Once the lathe is up and running, you should theoretically be able to make the special items you previously did without (or paid through the nose for), such as shafts, plain, tapered or threaded discs, bearings, and so on. But if you are new to this, you'll want to know a lot more than you can learn from the salesman or the manual. Does the lathe really match your needs, and if so, how much?Choosing and Using the Right Metal Shop Lathe is an essential source of information for lathe buyers and users at every level, from mini-size tabletops up to industrial machines weighing half a ton or more. It answers the question of what else you will need to get useful work from the machine. For instance, what comes as "standard equipment" with the lathe? Most include a chuck (usually a 4-jaw independent, not the self-centering 3-jaw you'll want to use most of the time), maybe a faceplate (rarely used), and a 4-way toolholder you will probably swap right away for a more sensible design. Never included is a tailstock drill chuck, an essential accessory you will need from day one-and the same goes for actual cutting tools. Almost certainly, there won't be a digital readout (DRO), which used to be regarded as a "maybe-someday" luxury-but not anymore.The work talks about cutting oils, cutting speeds and easier-to-machine materials, and it cautions against buying sets of anything, vs. buying the one accessory you'll truly need. Finally, there are chapters on building a tailstock drill press, a special toolpost for easy screw cutting, and a precision grinder for lathe tools that can be made from oddments of material in a couple of days or less.           Features Differentiates between the truly essential features (screw-cutting) and the nice-to-have (power feeding), spindle speed selection from a gearbox (typical) or continuously variable (more convenient).Offers advice on screw-cutting US and metric threads, and handling the machinist's most trouble-prone actions, such as knurling and parting off.Provides a workpiece tutorial that demonstrates many of the commonplace lathe routines-ideal for first-time users.

Taschenbuch. Condición: Neu. Neuware - Choosing & Using the Right Metal Shop Lathe is an essential source of information for lathe buyers and users at every level, from mini-size tabletops up to industrial machines weighing half a ton or more. It answers the question of what else you will need to get useful work from the machine. For instance, what comes as "standard equipment" with the lathe Most include a chuck (usually a 4-jaw independent, not the self-centering 3-jaw you'll want to use most of the time), maybe a faceplate (rarely used), and a 4-way toolholder you will probably swap right away for a more sensible design. Never included is a tailstock drill chuck, an essential accessory you will need from day oneand the same goes for actual cutting tools. Almost certainly, there won't be a digital readout (DRO), which used to be regarded as a "maybe-someday" luxurybut not anymore.