Isbn: 9780831134723 - cnc tips and techniques: a reader for programmers (19 resultados)

paperback. Condición: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority.

Condición: acceptable. Rear hinge is partially separated. A former library book with all the expected stamps, stickers and markings. Spine reinforced with clear tape. Some shelf, storage or usage wear present. The binding is cracked, but all pages are present. The pages appear unmarked. Light staining on the page edges. Pictures available upon request. Individually inspected by Shay. Thanks for supporting an independent bookseller.…

Condición: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

Condición: New.

Condición: New.

Paperback. Condición: New. OverviewDuring the past decade, Peter Smid wrote dozens of column for Shop Talkmagazine that addressed the full gamut of CNC topics, such as tapping and threading and knurling; program length and memory needs; G-codes, M-functions, cycles, macros . and more still. Ever since Shop Talk ceased publication, these columns have been unavailable. Now, in CNC Tips and Techniques, we are delighted to bring them back-over 60 of the best of Peter's columns --- all under one cover, so that you can have full and easy access to the advice Peter has been sharing during the past decade.CNC Tips and Techniques is a treasure trove of Peter Smid's "lost work" that is certain to be an invaluable addition to your CNC toolkit.  We hope the advice and instructions contained in these readings will help you do your job more efficiently and more effectively - and that you find them a good read besides. FeaturesOffers more than 60 focused columns which have been thoroughly reviewed since its initial publication and updated as needed to reflect ongoing changes in the field.Columns are presented here in chronological order of when they first appeared.Includes an alternative table of contents, organized by topic.Provides several useful appendices and an extensive index.Appeals to both veterans and newcomers with tips and techniques that can be applied at work and speed up the learning curve. Peter Smid is a professional consultant, educator and speaker, with many years of practical, hands-on experience, in the industrial and educational fields. During his career, he has gathered an extensive experience with CNC and CAD/CAM applications on all levels. He consults to manufacturing industry and educational institutions on practical use of Computerized Numerical Control technology, part programming, Autocad®, Mastercam® and other CAD/CAM software, as well as advanced machining, tooling, setup, and many other related fields. His comprehensive industrial background in CNC programming, machining and company-oriented training has assisted several hundred companies to benefit from his wide-ranging knowledge.   Mr. Smid's long time association with advanced manufacturing companies and CNC machinery vendors, as well as his affiliation with a number of Community and Technical College industrial technology programs and machine shop skills training, have enabled him to broaden his professional and consulting skills in the areas of CNC and CAD/CAM training, computer applications and needs analysis, software evaluation, system benchmarking, programming, hardware selection, software customizing, and operations management.Over the years, Mr. Smid has developed and delivered hundreds of customized educational programs to thousands of instructors and students at colleges and universities across United States, Canada and Europe, as well as to a large number of manufacturing companies and private sector organizations and individuals. He has actively participated in many industrial trade shows, co.…

Condición: New. In English.

Paperback / softback. Condición: New. New copy - Usually dispatched within 4 working days.

Condición: New.

Paperback. Condición: New. OverviewDuring the past decade, Peter Smid wrote dozens of column for Shop Talkmagazine that addressed the full gamut of CNC topics, such as tapping and threading and knurling; program length and memory needs; G-codes, M-functions, cycles, macros . and more still. Ever since Shop Talk ceased publication, these columns have been unavailable. Now, in CNC Tips and Techniques, we are delighted to bring them back-over 60 of the best of Peter's columns --- all under one cover, so that you can have full and easy access to the advice Peter has been sharing during the past decade.CNC Tips and Techniques is a treasure trove of Peter Smid's "lost work" that is certain to be an invaluable addition to your CNC toolkit.  We hope the advice and instructions contained in these readings will help you do your job more efficiently and more effectively - and that you find them a good read besides. FeaturesOffers more than 60 focused columns which have been thoroughly reviewed since its initial publication and updated as needed to reflect ongoing changes in the field.Columns are presented here in chronological order of when they first appeared.Includes an alternative table of contents, organized by topic.Provides several useful appendices and an extensive index.Appeals to both veterans and newcomers with tips and techniques that can be applied at work and speed up the learning curve. Peter Smid is a professional consultant, educator and speaker, with many years of practical, hands-on experience, in the industrial and educational fields. During his career, he has gathered an extensive experience with CNC and CAD/CAM applications on all levels. He consults to manufacturing industry and educational institutions on practical use of Computerized Numerical Control technology, part programming, Autocad®, Mastercam® and other CAD/CAM software, as well as advanced machining, tooling, setup, and many other related fields. His comprehensive industrial background in CNC programming, machining and company-oriented training has assisted several hundred companies to benefit from his wide-ranging knowledge.   Mr. Smid's long time association with advanced manufacturing companies and CNC machinery vendors, as well as his affiliation with a number of Community and Technical College industrial technology programs and machine shop skills training, have enabled him to broaden his professional and consulting skills in the areas of CNC and CAD/CAM training, computer applications and needs analysis, software evaluation, system benchmarking, programming, hardware selection, software customizing, and operations management.Over the years, Mr. Smid has developed and delivered hundreds of customized educational programs to thousands of instructors and students at colleges and universities across United States, Canada and Europe, as well as to a large number of manufacturing companies and private sector organizations and individuals. He has actively participated in many industrial trade shows, co.…

Paperback. Condición: Brand New. 238 pages. 8.50x5.50x0.75 inches. In Stock.

Kartoniert / Broschiert. Condición: New. KlappentextrnrnWritten by one of the most authoritative experts in the field, this compilation is organized by topic and offers more than 80 focused articles. It covers all aspects of CNC, such as hardware, software, programming, codes, and macr.

Taschenbuch. Condición: Neu. Neuware - During the past decade, Peter Smid wrote dozens of column forShop Talkmagazine that addressed the full gamut of CNC topics, such as tapping and threading and knurling; program length and memory needs; G-codes, M-functions, cycles, macros and more still.Ever sinceShop Talkceased publication, these columns have been unavailable. Now, inCNC Tips and Techniques, we are delighted to bring them backover 60 of the best of Peter's columns --- all under one cover, so that you can have full and easy access to the advice Peter has been sharing during the past decade.CNC Tips and Techniquesis a treasure trove of Peter Smid's "lost work" that is certain to be an invaluable addition to your CNC toolkit. We hope the advice and instructions contained in these readings will help you do your job more efficiently and more effectively and that you find them a good read besides.Features- Offers more than 60 focused columns which have been thoroughly reviewed since its initial publication and updated as needed to reflect ongoing changes in the field.- Columns are presented here in chronological order of when they first appeared.- Includes an alternative table of contents, organized by topic.- Provides several useful appendices and an extensive index.- Appeals to both veterans and newcomers with tips and techniques that can be applied at work and speed up the learning curve.…

Condición: As New. Unread book in perfect condition.

Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: New. OverviewDuring the past decade, Peter Smid wrote dozens of column for Shop Talkmagazine that addressed the full gamut of CNC topics, such as tapping and threading and knurling; program length and memory needs; G-codes, M-functions, cycles, macros . and more still. Ever since Shop Talk ceased publication, these columns have been unavailable. Now, in CNC Tips and Techniques, we are delighted to bring them back-over 60 of the best of Peter's columns --- all under one cover, so that you can have full and easy access to the advice Peter has been sharing during the past decade.CNC Tips and Techniques is a treasure trove of Peter Smid's "lost work" that is certain to be an invaluable addition to your CNC toolkit.  We hope the advice and instructions contained in these readings will help you do your job more efficiently and more effectively - and that you find them a good read besides. FeaturesOffers more than 60 focused columns which have been thoroughly reviewed since its initial publication and updated as needed to reflect ongoing changes in the field.Columns are presented here in chronological order of when they first appeared.Includes an alternative table of contents, organized by topic.Provides several useful appendices and an extensive index.Appeals to both veterans and newcomers with tips and techniques that can be applied at work and speed up the learning curve. Peter Smid is a professional consultant, educator and speaker, with many years of practical, hands-on experience, in the industrial and educational fields. During his career, he has gathered an extensive experience with CNC and CAD/CAM applications on all levels. He consults to manufacturing industry and educational institutions on practical use of Computerized Numerical Control technology, part programming, Autocad®, Mastercam® and other CAD/CAM software, as well as advanced machining, tooling, setup, and many other related fields. His comprehensive industrial background in CNC programming, machining and company-oriented training has assisted several hundred companies to benefit from his wide-ranging knowledge.   Mr. Smid's long time association with advanced manufacturing companies and CNC machinery vendors, as well as his affiliation with a number of Community and Technical College industrial technology programs and machine shop skills training, have enabled him to broaden his professional and consulting skills in the areas of CNC and CAD/CAM training, computer applications and needs analysis, software evaluation, system benchmarking, programming, hardware selection, software customizing, and operations management.Over the years, Mr. Smid has developed and delivered hundreds of customized educational programs to thousands of instructors and students at colleges and universities across United States, Canada and Europe, as well as to a large number of manufacturing companies and private sector organizations and individuals. He has actively participated in many industrial trade shows, co.…

Paperback. Condición: New. OverviewDuring the past decade, Peter Smid wrote dozens of column for Shop Talkmagazine that addressed the full gamut of CNC topics, such as tapping and threading and knurling; program length and memory needs; G-codes, M-functions, cycles, macros . and more still. Ever since Shop Talk ceased publication, these columns have been unavailable. Now, in CNC Tips and Techniques, we are delighted to bring them back-over 60 of the best of Peter's columns --- all under one cover, so that you can have full and easy access to the advice Peter has been sharing during the past decade.CNC Tips and Techniques is a treasure trove of Peter Smid's "lost work" that is certain to be an invaluable addition to your CNC toolkit.  We hope the advice and instructions contained in these readings will help you do your job more efficiently and more effectively - and that you find them a good read besides. FeaturesOffers more than 60 focused columns which have been thoroughly reviewed since its initial publication and updated as needed to reflect ongoing changes in the field.Columns are presented here in chronological order of when they first appeared.Includes an alternative table of contents, organized by topic.Provides several useful appendices and an extensive index.Appeals to both veterans and newcomers with tips and techniques that can be applied at work and speed up the learning curve. Peter Smid is a professional consultant, educator and speaker, with many years of practical, hands-on experience, in the industrial and educational fields. During his career, he has gathered an extensive experience with CNC and CAD/CAM applications on all levels. He consults to manufacturing industry and educational institutions on practical use of Computerized Numerical Control technology, part programming, Autocad®, Mastercam® and other CAD/CAM software, as well as advanced machining, tooling, setup, and many other related fields. His comprehensive industrial background in CNC programming, machining and company-oriented training has assisted several hundred companies to benefit from his wide-ranging knowledge.   Mr. Smid's long time association with advanced manufacturing companies and CNC machinery vendors, as well as his affiliation with a number of Community and Technical College industrial technology programs and machine shop skills training, have enabled him to broaden his professional and consulting skills in the areas of CNC and CAD/CAM training, computer applications and needs analysis, software evaluation, system benchmarking, programming, hardware selection, software customizing, and operations management.Over the years, Mr. Smid has developed and delivered hundreds of customized educational programs to thousands of instructors and students at colleges and universities across United States, Canada and Europe, as well as to a large number of manufacturing companies and private sector organizations and individuals. He has actively participated in many industrial trade shows, co.…

Paperback / softback. Condición: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.