pendleton r tuttle (9 resultados)

Condición: New. In.

Paperback. Condición: Brand New. 180 pages. 10.99x8.26x0.43 inches. In Stock.

Taschenbuch. Condición: Neu. Manual on Experimental Methods for Mechanical Testing of Composites | R. Pendleton (u. a.) | Taschenbuch | 170 S. | Englisch | 2011 | Springer | EAN 9789401070003 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953).

Hardcover. Condición: Very Good. Very Good. Dust Jacket may NOT BE INCLUDED.CDs may be missing. SHIPS FROM MULTIPLE LOCATIONS. book.

Condición: new. Questo è un articolo print on demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953). 180 pp. Englisch.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., Numerical Analysis of the Reinforcement Effect of a .

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953).Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 180 pp. Englisch.