john matsson (247 resultados)

Paperback. Condición: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!

Perfect Paperback. Condición: Good. ARRIVES IN 2-4 BUSINESS DAYS if you choose Expedited Shipping! May contain highlighting/underlining/notes/etc. May have used stickers on cover. Access codes and supplements are not guaranteed to be included with used books. Ships same or next day. Expedited shipping: 3-5 business days, Standard shipping: 4-14 business days.

paperback. Condición: Very good condition. In very clean condition. Ships quickly.

Condición: Acceptable. SHIPS FAST. RESCUED + REPAIRED. Binding and pages have been reinforced with tape, with tape and stickers on the cover and marks/notes throughout-a fully readable working copy brought back to life through our Book Sustainability Project. No access codes or CDs.

Unknown. Condición: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

paperback. Condición: New. 1st Edition. Ships in a BOX from Central Missouri! UPS shipping for most packages, (Priority Mail for AK/HI/APO/PO Boxes).

Condición: Good. LIGHTNING FAST SHIPPING!Paperback, in good condition. Cover has a few textbook stickers, pages have LOTS of underlining and notes, binding is tight. A solid reading copy. ~ Ships Fast.

Perfect Paperback. Condición: As New. Need it urgently? Upgrade to Expedited. In stock and we ship daily on weekdays & Saturdays.

Perfect Paperback. Condición: New.

paperback. Condición: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!

Condición: good.

Condición: New.

Paperback. Condición: new. Paperback. An Introduction to SOLIDWORKS Flow Simulation 2021 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow. Covers these feature of SOLIDWORKS Flow Simulation 2021: Animations Automatic and Manual Meshing Boundary Conditions Calculation Control Options External and Internal Flow Goals Laminar and Turbulent Flow Physical Features Result Visualizations Two and Three Dimensional Flow Velocity, Thermodynamic and Turbulence Parameters Wall Thermal Conditions Free Surfaces This book takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: very_good. Book is in very good condition and may include minimal underlining highlighting. The book can also include "From the library of" labels. May not contain miscellaneous items toys, dvds, etc. . We offer 100% money back guarantee and 24 7 customer service.

Condición: good. A copy that has been read, remains in good condition. All pages are intact, and the cover is intact. The spine and cover show signs of wear. Pages can include notes and highlighting and show signs of wear, and the copy can include "From the library of" labels or previous owner inscriptions. 100% GUARANTEE! Shipped with delivery confirmation, if you're not satisfied with purchase please return item for full refund. Ships via media mail.

Condición: As New. Unread book in perfect condition.

Condición: Very Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.

Condición: Good. Item in good condition and has highlighting/writing on text. Used texts may not contain supplemental items such as CDs, info-trac etc.

Condición: New.

Paperback. Condición: new. Paperback. An Introduction to SOLIDWORKS Flow Simulation 2023 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned.The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.Covers these feature of SOLIDWORKS Flow Simulation 2023:AnimationsAutomatic and Manual MeshingBoundary ConditionsCalculation Control OptionsExternal and Internal FlowGoalsLaminar and Turbulent FlowPhysical FeaturesResult VisualizationsTwo and Three Dimensional FlowVelocity, Thermodynamic and Turbulence ParametersWall Thermal ConditionsFree Surfaces An Introduction to SOLIDWORKS Flow Simulation 2023 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Paperback. Condición: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1000grams, ISBN:9781630573850.

Condición: Good. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc.

Condición: Very Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.

Condición: New. Brand New. Excellent Customer Service.

Condición: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Paperback. Condición: new. Paperback. As an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulations is often a critical step in verifying that a design will be successful. In this hands-on book, youll learn in detail how to run Computational Fluid Dynamics (CFD) simulations using ANSYS Fluent. ANSYS Fluent is known for its power, simplicity and speed, which has helped make it a world leader in CFD software, both in academia and industry.Unlike any other ANSYS Fluent textbook currently on the market, this book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. You will also learn how to visualize the computed flows in the post-processing phase using different types of plots. To better understand the mathematical models being applied, well validate the results from ANSYS Fluent with numerical solutions calculated using Mathematica.Throughout this book well learn how to create geometry using ANSYS Workbench and ANSYS DesignModeler, how to create mesh using ANSYS Meshing, how to use physical models and how to perform calculations using ANSYS Fluent. The twenty chapters in this book can be used in any order and are suitable for beginners with little or no previous experience using ANSYS. Intermediate users, already familiar with the basics of ANSYS Fluent, will still find new areas to explore and learn. An Introduction to ANSYS Fluent 2020 is designed to be used as a supplement to undergraduate courses in Aerodynamics, Finite Element Methods and Fluid Mechanics and is suitable for graduate level courses such as Viscous Fluid Flows and Hydrodynamic Stability.The use of CFD simulation software is rapidly growing in all industries. Companies are now expecting graduating engineers to have knowledge of how to perform simulations. Even if you dont eventually complete simulations yourself, understanding the process used to complete these simulations is necessary to be an effective team member. People with experience using ANSYS Fluent are highly sought after in the industry, so learning this software will not only give you an advantage in your classes, but also when applying for jobs and in the workplace. This book is a valuable tool that will help you master ANSYS Fluent and better understand the underlying theory. This book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.