Jh thornton (24 resultados)

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,450grams, ISBN.

Hardback. Condición: Very Good. No Jacket. 1st Edition. First edition, first printing. large octavo hardback. Orange cloth xiv + 474 pp.Illustrated Very Good condition No dust jacket No inscriptions.

Hard Cover. Condición: Very Good. No Jacket. Henry Holt reissue of Osgood edition. Top edge foxed, otherwise an excellent copy. 1873 Hard Cover. 96 pp. Green cloth, gilt titles, blind-stamped borders. A collection of biographical sketches of the English philosopher intended as a memorial by his contemporaries. Includes: A Sketch of His Life; His Career in the India House; His Moral Character; His Botanical Studies; His Place as a Critic; His Work in Philosophy; His Studies in Morals and Jurisprudence; His Work in Political Economy; His Influence at the Universities; His Influence as a Practical Politician; His Relation to Positivism; His Position as a Philosopher. Contributors include: Herbert Spencer; H.R. Fox Bourne; W.T. Thornton; Henry Trimen; W. Minto; J.H. Levy; W.A. Hunter; J.E. Cairnes; Henry Fawcett; Millicent Garrett Fawcett; Frederic Harrison. "John Stuart Mill (20 May 1806 - 7 May 1873), usually cited as J.S. Mill, was an English philosopher, political economist, and civil servant. One of the most influential thinkers in the history of classical liberalism, he contributed widely to social theory, political theory, and political economy. Dubbed "the most influential English-speaking philosopher of the nineteenth century", he conceived of liberty as justifying the freedom of the individual in opposition to unlimited state and social control. Mill was a proponent of utilitarianism, an ethical theory developed by his predecessor Jeremy Bentham. He contributed to the investigation of scientific methodology, though his knowledge of the topic was based on the writings of others, notably William Whewell, John Herschel, and Auguste Comte, and research carried out for Mill by Alexander Bain. He engaged in written debate with Whewell. A member of the Liberal Party and author of the early feminist work The Subjection of Women, Mill was also the second Member of Parliament to call for women's suffrage after Henry Hunt in 1832.…

Softcover. Condición: Good. 26-page booklet in good conition. Cover shows minor surface wear only. Text unmarked and uncreased. A good used copy with no significant flaws. 26 pp. Shipped Weight: Under 250 grams. Category: Engineering, Industrial, Trade; Shoes -- Dictionaries; Add. Inventory No: 260912CCY092008. …

Hardcover. Condición: Fair. 1846; marbled paper covered boards with full leather spine and edges; wear and discoloration around edges; 8vo, 7 3/4" to 9 3/4" tall; pencil marks on the ffep; pages are toned and are speckled with discoloration; 411 pages. Photos available upon request.

Condición: Very Good. First edition, 8vo., pp.xii,474, red cloth, gilt, numerous b/w illustrations; light sellotape staining to endpapers, very slight soiling to edges, light rubbing to extremities, a very good copy, in an unclipped dust jacket which is lightly soiled and slightly chipped to extremities, otherwise very good.…

Condición: Sehr gut. [First Edition]. 21 x 14 cm. xii, 582 pages. Illustrated in B&W. With a section of advertisements. Original cloth with gilt title on spine. Inside original dust jacket, now inside archival jacket. Very good in very good dust jacket. Ownership stamp on front free end paper and title page ('P.P. The Reliable Shoe Co. Ltd') Internally bright and clean. A very nice copy.…

Condición: New.

Condición: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Condición: New.

Condición: New.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Condición: New. In English.

Taschenbuch. Condición: Neu. Neuware - The role of energy in the modern world goes beyond mere technology and economics to influence welfare, environment, life quality and, broadly, civilisation. Since the industrial revolution, energy conversion technology has been at the forefront of innovation required to satisfy the needs of mankind. This technology more than others has always been very dependent on the performance of the materials used; especially over the last two decades during which efficiency and environmental concerns have become challenging objectives. In this context the European Commission has developed significant collaborative programmes in Europe within the COST framework, to enhance the state of the art in this technology. The Li~ge Conferences pursue the mission to report on the achievements of these programmes in the light of progress made elsewhere. The first four conferences in this series were held in 1978, 1982, 1986 and 1990, and provided the opportunity to present and review the work of the EuropeanMaterials Collaborative Programmes COST-50 (gas turbines), COST-505 (steam turbines) and COST- 501 (energy conversion from fossil fuels). The proceedings of these conferences were published by Applied Science Publishers (1978) and by D. ReideIlKluwer Publishing Company (1982, 1986 and 1990). While the first two Conferences have dealt essentially with high temperature alloys for gas turbines (COST 50), the third and fourth Conferences held in 1986 and 1990 were concerned with a broader range of topics, including the work of the third round of COST-50 (1972-1983), that of COST-50l, which was initiated in 1981 and COST 505 (1983-1990).…

Condición: New.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The role of energy in the modern world goes beyond mere technology and economics to influence welfare, environment, life quality and, broadly, civilisation. Since the industrial revolution, energy conversion technology has been at the forefront of innovation required to satisfy the needs of mankind. This technology more than others has always been very dependent on the performance of the materials used; especially over the last two decades during which efficiency and environmental concerns have become challenging objectives. In this context the European Commission has developed significant collaborative programmes in Europe within the COST framework, to enhance the state of the art in this technology. The Li~ge Conferences pursue the mission to report on the achievements of these programmes in the light of progress made elsewhere. The first four conferences in this series were held in 1978, 1982, 1986 and 1990, and provided the opportunity to present and review the work of the EuropeanMaterials Collaborative Programmes COST-50 (gas turbines), COST-505 (steam turbines) and COST- 501 (energy conversion from fossil fuels). The proceedings of these conferences were published by Applied Science Publishers (1978) and by D. ReideIlKluwer Publishing Company (1982, 1986 and 1990). While the first two Conferences have dealt essentially with high temperature alloys for gas turbines (COST 50), the third and fourth Conferences held in 1986 and 1990 were concerned with a broader range of topics, including the work of the third round of COST-50 (1972-1983), that of COST-50l, which was initiated in 1981 and COST 505 (1983-1990).…

Hardcover. Condición: Very Good. Illus. with b.w. photos. 8vo. orig. cl. in slightly marked and torn d/w., else v.g.

Cloth. Condición: Very Good. Estado de la sobrecubierta: Fair. DJ rubbed and chipped with several tears to edges and some minor loss to spine. Closed edges foxed. Size: 8vo.

Hardcover. Condición: Very Good. Estado de la sobrecubierta: Fair. First Edition. "While nothing can take the place of practical instruction and experience in the factory, an authoritative textbook written by experts is an essential adjunct, bringing to the reader the accumulated knowedge of many of the leading men in the industry. Such is this textbook. All the processes involved in the manufacture of men's and women's boots, shoes and slippers are covered - The Basis and Development of Design - Pattern Cutting - Clicking - Closing - Bottom Stock - Making - Finishing - Shoe Room - Slipper Making. The treatment is kept practical throughout, and all processes are well illustrated. A complete guide to footwear manufacture in one volume." - dust jacket. xii, 582 semi-glossy pages. Index and bibliography. Frequent line diagrams and black and white illustrations. Book pleasingly well-preserved, tight and unmarked with gentle peripheral wear to original terracotta cloth. Above-average wear to dust jacket now in glossy new archival-grade protection. A quality first edition example of this highly-regarded reference. ; 8vo.…

Condición: new. Questo è un articolo print on demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The role of energy in the modern world goes beyond mere technology and economics to influence welfare, environment, life quality and, broadly, civilisation. Since the industrial revolution, energy conversion technology has been at the forefront of innovation required to satisfy the needs of mankind. This technology more than others has always been very dependent on the performance of the materials used; especially over the last two decades during which efficiency and environmental concerns have become challenging objectives. In this context the European Commission has developed significant collaborative programmes in Europe within the COST framework, to enhance the state of the art in this technology. The Li~ge Conferences pursue the mission to report on the achievements of these programmes in the light of progress made elsewhere. The first four conferences in this series were held in 1978, 1982, 1986 and 1990, and provided the opportunity to present and review the work of the European Materials Collaborative Programmes COST-50 (gas turbines), COST-505 (steam turbines) and COST- 501 (energy conversion from fossil fuels). The proceedings of these conferences were published by Applied Science Publishers (1978) and by D. ReideIlKluwer Publishing Company (1982, 1986 and 1990). While the first two Conferences have dealt essentially with high temperature alloys for gas turbines (COST 50), the third and fourth Conferences held in 1986 and 1990 were concerned with a broader range of topics, including the work of the third round of COST-50 (1972-1983), that of COST-50l, which was initiated in 1981 and COST 505 (1983-1990). 996 pp. Englisch.…

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The role of energy in the modern world goes beyond mere technology and economics to influence welfare, environment, life quality and, broadly, civilisation. Since the industrial revolution, energy conversion technology has been at the forefront of innovation required to satisfy the needs of mankind. This technology more than others has always been very dependent on the performance of the materials used; especially over the last two decades during which efficiency and environmental concerns have become challenging objectives. In this context the European Commission has developed significant collaborative programmes in Europe within the COST framework, to enhance the state of the art in this technology. The Li~ge Conferences pursue the mission to report on the achievements of these programmes in the light of progress made elsewhere. The first four conferences in this series were held in 1978, 1982, 1986 and 1990, and provided the opportunity to present and review the work of the EuropeanMaterials Collaborative Programmes COST-50 (gas turbines), COST-505 (steam turbines) and COST- 501 (energy conversion from fossil fuels). The proceedings of these conferences were published by Applied Science Publishers (1978) and by D. ReideIlKluwer Publishing Company (1982, 1986 and 1990). While the first two Conferences have dealt essentially with high temperature alloys for gas turbines (COST 50), the third and fourth Conferences held in 1986 and 1990 were concerned with a broader range of topics, including the work of the third round of COST-50 (1972-1983), that of COST-50l, which was initiated in 1981 and COST 505 (1983-1990).Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 996 pp. Englisch.…