Ijaz mohsin (7 resultados)
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 51,10
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Kinetic Modelling of thermal debinding & sintering in MIM processes | Metal Injection Molding | Ijaz Ul Mohsin | Taschenbuch | 152 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783845475943 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt,… info[at]bod[dot]de | Anbieter: preigu.
- Tapa blanda
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 122,63
Envío por EUR 11,70Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Brand New. 152 pages. 8.66x5.91x0.35 inches. In Stock.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 202,48
Envío por EUR 29,25Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
paperback. Condición: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,00
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The metal injection molding (MIM) process is an efficient method for the high volume production of complex-shaped components from powders for high performance applications. Three systems, pure copper, Fe-12wt%Cu and heavy alloy part…s from W-8%Ni-2%Cu powder mix were fabricated by metal injection molding. The soluble part of the binder was removed by organic solvent de-binding in n-heptane. The solvent de-binded specimens were used to study thermal de-binding of each system using evolved gas analysis technique. The thermo-gravimetric technique coupled with infrared and mass spectrometry provides sufficient knowledge to understand the degradation and reaction mechanisms during thermal de-binding.Thermo-physical data, on which temperature field calculation is strongly dependent, were also measured with best of available resources in AIT (Austrian Institute of Technology) laboratory using DSC, TGA-FTIR-MS, DIL and LFA instruments. Then finite element models were formulated by embedded kinetics model and thermo-physical data of the system. The formulated FE model described the material behavior during the thermal de-binding and sintering. 152 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 48,50
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Mohsin Ijaz UlMSc Chemistry from University of Punjab Pakistan,MS in Polymer Science & engineering from London,UK.PhD in Powder Metallurgy from Vienna University of Technology, Austria.15 research artic…les in international journals a.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,00
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The metal injection molding (MIM) process is an efficient method for the high volume production of complex-shaped components from powders for high performance applications. Three systems, pure copper, Fe-12wt%Cu and heavy alloy parts fr…om W-8%Ni-2%Cu powder mix were fabricated by metal injection molding. The soluble part of the binder was removed by organic solvent de-binding in n-heptane. The solvent de-binded specimens were used to study thermal de-binding of each system using evolved gas analysis technique. The thermo-gravimetric technique coupled with infrared and mass spectrometry provides sufficient knowledge to understand the degradation and reaction mechanisms during thermal de-binding.Thermo-physical data, on which temperature field calculation is strongly dependent, were also measured with best of available resources in AIT (Austrian Institute of Technology) laboratory using DSC, TGA-FTIR-MS, DIL and LFA instruments. Then finite element models were formulated by embedded kinetics model and thermo-physical data of the system. The formulated FE model described the material behavior during the thermal de-binding and sintering.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 152 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,71
Envío por EUR 61,22Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The metal injection molding (MIM) process is an efficient method for the high volume production of complex-shaped components from powders for high performance applications. Three systems, pure copper, Fe-12wt%Cu and heavy alloy parts fro…m W-8%Ni-2%Cu powder mix were fabricated by metal injection molding. The soluble part of the binder was removed by organic solvent de-binding in n-heptane. The solvent de-binded specimens were used to study thermal de-binding of each system using evolved gas analysis technique. The thermo-gravimetric technique coupled with infrared and mass spectrometry provides sufficient knowledge to understand the degradation and reaction mechanisms during thermal de-binding.Thermo-physical data, on which temperature field calculation is strongly dependent, were also measured with best of available resources in AIT (Austrian Institute of Technology) laboratory using DSC, TGA-FTIR-MS, DIL and LFA instruments. Then finite element models were formulated by embedded kinetics model and thermo-physical data of the system. The formulated FE model described the material behavior during the thermal de-binding and sintering.
