don dingee (16 resultados)

Condición: As New. Unread book in perfect condition.

Condición: New.

Paperback or Softback. Condición: New. The Field Guide to Telecommuting: The Definitive Handbook for Current and Potential Teleworkers. Book.

Condición: As New. Unread book in perfect condition.

Condición: New.

Condición: New.

paperback. Condición: Good. Our good condition books are generally good for reading but not for gifting or collecting. They could have imperfections such as creasing, fanning, inscriptions, margin notes, yellowing, staining on edge or cover or pages, bumps, scuffs, etc etc (sometimes multiple of these). It's a wide category that encompasses anything that isn't almost-new down to anything that is slightly better than poor. We would NOT recommend gifting Good books - these should be considered reading copies. Our books are dispatched from a Yorkshire former cotton mill. We list via barcode/ISBN so please note that the images are stock images and may not be the exact copy you receive, furthermore the details about edition and year might not be accurate as many publishers reuse the same ISBN for multiple editions and as we simply scan a barcode or enter an ISBN we do not check the validity of the edition data when listing. If you're looking for an exact edition please don't order (at least not without checking with us first, although we don't always have time to check). We aim to dispatch prompty, the service used will depend on order value and book size. We can ship to most countries, see our shipping policies. Payment is via Abe only.

Condición: As New. Unread book in perfect condition.

Condición: New.

paperback. Condición: Very Good. Orders shipped daily from the UK. Professional seller.

Condición: As New. Unread book in perfect condition.

Condición: New.

Paperback. Condición: new. Paperback. The first half of "PROTOTYPICAL" is a concise history of FPGA-based prototyping. We go back to the beginning, briefly introducing the debut of the Altera EP300 in 1984 and the Xilinx XC2064 in 1985. We then discuss the tipping point for what would become FPGA-based prototyping: the introduction of the Quickturn Systems RPM in May 1988. Strictly speaking, the RPM was an FPGA-based hardware emulator, but it set the stage for a radical change in chip development methodology. Intel took the Quickturn technology and put the P5 microarchitecture through its paces on a 14-machine cluster, running a killer demo in 1991 and ultimately releasing the Pentium microprocessor in 1993. From there, while the large EDA firms scuffled over bigger and bigger hardware emulation capability, several academic teams started deploying FPGAs for reconfigurable computing and rapid prototyping. These teams were looking for lower cost ways to prove out algorithms and chip designs. It was during this period issues of FPGA interconnect and synthesis partitioning were uncovered and addressed - and just in time, as ARM7TDMI synthesizable cores appeared in 1997. We then launch into chapters with brief timelines of three of the major firms in FPGA-based prototyping: S2C, Synopsys, and Cadence. We close the first half with a look at where FPGA-based prototyping is headed, including how it can help application segments such as automotive, wearables, and the IoT - three segments we believe will see an increasing number of design starts as new players seek to optimize and differentiate their software through chip design. The second half of "PROTOTYPICAL" is an all-new Field Guide titled "Implementing an FPGA Prototyping Methodology" authored by the teams at S2C. It looks at when design teams need an FPGA-based prototyping solution, how to choose one, and how to be sure the platform is scalable including a look at the latest cloud-based implementations. It then dives into the methodology: setting up a prototype, partitioning, interconnect, debugging, and exercising a design. It's a practical view of the questions teams have and the issues they run into, and how to solve them. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.

Paperback / softback. Condición: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.

Paperback. Condición: new. Paperback. The first half of "PROTOTYPICAL" is a concise history of FPGA-based prototyping. We go back to the beginning, briefly introducing the debut of the Altera EP300 in 1984 and the Xilinx XC2064 in 1985. We then discuss the tipping point for what would become FPGA-based prototyping: the introduction of the Quickturn Systems RPM in May 1988. Strictly speaking, the RPM was an FPGA-based hardware emulator, but it set the stage for a radical change in chip development methodology. Intel took the Quickturn technology and put the P5 microarchitecture through its paces on a 14-machine cluster, running a killer demo in 1991 and ultimately releasing the Pentium microprocessor in 1993. From there, while the large EDA firms scuffled over bigger and bigger hardware emulation capability, several academic teams started deploying FPGAs for reconfigurable computing and rapid prototyping. These teams were looking for lower cost ways to prove out algorithms and chip designs. It was during this period issues of FPGA interconnect and synthesis partitioning were uncovered and addressed - and just in time, as ARM7TDMI synthesizable cores appeared in 1997. We then launch into chapters with brief timelines of three of the major firms in FPGA-based prototyping: S2C, Synopsys, and Cadence. We close the first half with a look at where FPGA-based prototyping is headed, including how it can help application segments such as automotive, wearables, and the IoT - three segments we believe will see an increasing number of design starts as new players seek to optimize and differentiate their software through chip design. The second half of "PROTOTYPICAL" is an all-new Field Guide titled "Implementing an FPGA Prototyping Methodology" authored by the teams at S2C. It looks at when design teams need an FPGA-based prototyping solution, how to choose one, and how to be sure the platform is scalable including a look at the latest cloud-based implementations. It then dives into the methodology: setting up a prototype, partitioning, interconnect, debugging, and exercising a design. It's a practical view of the questions teams have and the issues they run into, and how to solve them. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.