Christer anthony (25 resultados)
- Tapa blanda
Librería: AwesomeBooks, Wallingford, Reino UnidoAwesomeBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 17,36
Envío por EUR 4,78Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Very Good. Reforming Nuclear Export Controls: The Future of the Nuclear Suppliers Group (SIPRI Research Reports) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged.… This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 20,35
Envío por EUR 2,31Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa blanda
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 22,33
Envío por EUR 2,31Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa blanda
Librería: Bahamut Media, Reading, Reino UnidoBahamut Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 17,36
Envío por EUR 8,10Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 23,59
Envío por EUR 17,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New.
- Tapa blanda
Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Como Nuevo
EUR 28,21
Envío por EUR 17,41Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: As New. Unread book in perfect condition.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 42,47
Envío por EUR 13,91Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
Reforming Nuclear Export Controls
Ahlstrom, Christer; Anthony, Ian; Kile, Shannon N.; Fedchenko, Vitaly
- Tapa blanda
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 48,95
Envío por EUR 10,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. This major new study examaines the structure and activities of the Nuclear Suppliers Group (NSG) as an ad hoc group of 45 states committed to applying effective controls on the export of nuclear-related dual-use equipment and material. Series: SIPRI Research Reports. Num Pages: 148 pages, black & white illustrati…ons, black & white tables. BIC Classification: 1FBN; 1FKA; JPS; JWMN; RNQ; TB. Category: (P) Professional & Vocational. Dimension: 216 x 138 x 8. Weight in Grams: 203. . 2007. Paperback. . . . .
Reforming Nuclear Export Controls
Ahlstrom, Christer; Anthony, Ian; Kile, Shannon N.; Fedchenko, Vitaly
- Tapa blanda
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 60,76
Envío por EUR 9,20Se envía dentro de Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. This major new study examaines the structure and activities of the Nuclear Suppliers Group (NSG) as an ad hoc group of 45 states committed to applying effective controls on the export of nuclear-related dual-use equipment and material. Series: SIPRI Research Reports. Num Pages: 148 pages, black & white illustrati…ons, black & white tables. BIC Classification: 1FBN; 1FKA; JPS; JWMN; RNQ; TB. Category: (P) Professional & Vocational. Dimension: 216 x 138 x 8. Weight in Grams: 203. . 2007. Paperback. . . . . Books ship from the US and Ireland.
- Tapa blanda
Librería: Buchpark, Trebbin, AlemaniaBuchpark
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Excelente
EUR 13,20
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | This major new study examaines the structure and activities of the Nuclear Suppliers Group (NSG) as an ad hoc group of 45 states committed to applying effective controls on the export of nuclear-related dual-use equipment and material.
- Tapa blanda
Librería: Ria Christie Collections, Uxbridge, Reino UnidoRia Christie Collections
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 115,85
Envío por EUR 13,91Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. In.
- Tapa blanda
Librería: Buchpark, Trebbin, AlemaniaBuchpark
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 31,00
Envío por EUR 105,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Condición: Gut. Zustand: Gut | Seiten: 372 | Sprache: Englisch | Produktart: Bücher | This monograph contains some ofthe papers presented at a UK-Japanese Workshop on Stochastic Modelling in Innovative Manufacturing held at Churchill College, Cambridge on July 20 and 21st 1995, sponsored jointly by the UK Engineering and Physica…l Science Research Council and the British Council. Attending were 19 UK and 24 Japanese delegates representing 28 institutions. The aim of the workshop was to discuss the modelling work being done by researchers in both countries on the new activities and challenges occurring in manufacturing. These challenges have arisen because of the increasingly uncertain environment of modern manufacturing due to the commercial need to respond more quickly to customers demands, and the move to just-in-time manufacturing and flexible manufacturing systems and the increasing requirements for quality. As well as time pressure, the increasing importance of the quality of the products, the need to hold the minimum stock of components, and the importance of reliable production systems has meant that manufacturers need to design production systems that perform well in randomly varying conditions and that their operating procedures can respond to changes in conditions and requirements. This has increased the need to understand how manufacturing systems work in the random environments, and so emphasised the importance of stochastic models of such systems.
- Tapa blanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 149,92
Envío por EUR 3,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. pp. 376.
Más imágenes- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 95,70
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Stochastic Modelling in Innovative Manufacturing | Proceedings, Cambridge, U.K., July 21-22, 1995 | Anthony H. Christer (u. a.) | Taschenbuch | Lecture Notes in Economics and Mathematical Systems | x | Englisch | 1996 | Springer | EAN 9783540617686 | Verantwortliche Person für die EU: Springer Verlag… GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Tapa blanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 62,82Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - This monograph contains some ofthe papers presented at a UK-Japanese Workshop on Stochastic Modelling in Innovative Manufacturing held at Churchill College, Cambridge on July 20 and 21st 1995, sponsored jointly by the UK Engineering and Physical Sc…ience Research Council and the British Council. Attending were 19 UK and 24 Japanese delegates representing 28 institutions. The aim of the workshop was to discuss the modelling work being done by researchers in both countries on the new activities and challenges occurring in manufacturing. These challenges have arisen because of the increasingly uncertain environment of modern manufacturing due to the commercial need to respond more quickly to customers demands, and the move to just-in-time manufacturing and flexible manufacturing systems and the increasing requirements for quality. As well as time pressure, the increasing importance of the quality of the products, the need to hold the minimum stock of components, and the importance of reliable production systems has meant that manufacturers need to design production systems that perform well in randomly varying conditions and that their operating procedures can respond to changes in conditions and requirements. This has increased the need to understand how manufacturing systems work in the random environments, and so emphasised the importance of stochastic models of such systems.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 178,17
Envío por EUR 29,02Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. Like New. book.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 28,71
Envío por EUR 7,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 148 1:B&W 5.5 x 8.5 in or 216 x 140 mm (Demy 8vo) Perfect Bound on Creme w/Gloss Lam.
- Tapa blanda
- Impresión bajo demanda
Librería: Books Puddle, New York, NY, Estados Unidos de AmericaBooks Puddle
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 34,00
Envío por EUR 3,50Se envía dentro de Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 148.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 28,93
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 148.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 25,44
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This major new study examaines the structure and activities of the Nuclear Suppliers Group (NSG) as an ad hoc group of 45 states committed to applying effective controls on the export of nuclear-related dual-use equip…ment and material.The diversion .
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This monograph contains some ofthe papers presented at a UK-Japanese Workshop on Stochastic Modelling in Innovative Manufacturing held at Churchill College, Cambridge on July 20 and 21st 1995, sponsored jointly by the UK Engineering… and Physical Science Research Council and the British Council. Attending were 19 UK and 24 Japanese delegates representing 28 institutions. The aim of the workshop was to discuss the modelling work being done by researchers in both countries on the new activities and challenges occurring in manufacturing. These challenges have arisen because of the increasingly uncertain environment of modern manufacturing due to the commercial need to respond more quickly to customers demands, and the move to just-in-time manufacturing and flexible manufacturing systems and the increasing requirements for quality. As well as time pressure, the increasing importance of the quality of the products, the need to hold the minimum stock of components, and the importance of reliable production systems has meant that manufacturers need to design production systems that perform well in randomly varying conditions and that their operating procedures can respond to changes in conditions and requirements. This has increased the need to understand how manufacturing systems work in the random environments, and so emphasised the importance of stochastic models of such systems. 372 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 92,27
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This monograph contains some ofthe papers presented at a UK-Japanese Workshop on Stochastic Modelling in Innovative Manufacturing held at Churchill College, Cambridge on July 20 and 21st 1995, sponsored jointly by the… UK Engineering and Physical Science Res.
- Tapa blanda
- Impresión bajo demanda
Librería: Majestic Books, Hounslow, Reino UnidoMajestic Books
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 156,56
Envío por EUR 7,55Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. Print on Demand pp. 376 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.
- Tapa blanda
- Impresión bajo demanda
Librería: Biblios, frankfurt am main, HESSE, AlemaniaBiblios
Contactar con el vendedorVendedor de 4 estrellasCondición: Nuevo
EUR 155,58
Envío por EUR 9,95Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 4 disponibles
Condición: New. PRINT ON DEMAND pp. 376.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 106,99
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This monograph contains some ofthe papers presented at a UK-Japanese Workshop on Stochastic Modelling in Innovative Manufacturing held at Churchill College, Cambridge on July 20 and 21st 1995, sponsored jointly by the UK Engineering and… Physical Science Research Council and the British Council. Attending were 19 UK and 24 Japanese delegates representing 28 institutions. The aim of the workshop was to discuss the modelling work being done by researchers in both countries on the new activities and challenges occurring in manufacturing. These challenges have arisen because of the increasingly uncertain environment of modern manufacturing due to the commercial need to respond more quickly to customers demands, and the move to just-in-time manufacturing and flexible manufacturing systems and the increasing requirements for quality. As well as time pressure, the increasing importance of the quality of the products, the need to hold the minimum stock of components, and the importance of reliable production systems has meant that manufacturers need to design production systems that perform well in randomly varying conditions and that their operating procedures can respond to changes in conditions and requirements. This has increased the need to understand how manufacturing systems work in the random environments, and so emphasised the importance of stochastic models of such systems.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 372 pp. Englisch.
