Filtrar la búsqueda

  • Libros (15)

a

Intervalo de precios personalizado (EUR)

a

Process control practice de tore hägglund (15 resultados)

Autor: 
Título: 
Refinar con la Búsqueda avanzada
  • Idioma: Inglés

    Editorial: De Gruyter, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 38,55

    Envío por EUR 2,41 
    Se envía dentro de Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: New.

  • Idioma: Inglés

    Editorial: De Gruyter, DE, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Rarewaves USA, HEBRON, KY, Estados Unidos de AmericaRarewaves USA

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 43,30

     Gastos de envío gratis 
    Se envía dentro de Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Paperback. Condición: New. This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. The book includes exercises and solutions and thus lends itself for teaching in the classroom.…

  • Idioma: Inglés

    Editorial: De Gruyter, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: GreatBookPrices, Columbia, MD, Estados Unidos de AmericaGreatBookPrices

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Usado - Como Nuevo

    EUR 42,54

    Envío por EUR 2,41 
    Se envía dentro de Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: As New. Unread book in perfect condition.

  • Idioma: Inglés

    Editorial: De Gruyter, DE, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 48,31

     Gastos de envío gratis 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Paperback. Condición: New. This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. The book includes exercises and solutions and thus lends itself for teaching in the classroom.…

  • Idioma: Inglés

    Editorial: De Gruyter, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 43,53

    Envío por EUR 17,90 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: New.

  • Idioma: Inglés

    Editorial: De Gruyter, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: GreatBookPricesUK, Woodford Green, Reino UnidoGreatBookPricesUK

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Usado - Como Nuevo

    EUR 49,92

    Envío por EUR 17,90 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: As New. Unread book in perfect condition.

  • Idioma: Inglés

    Editorial: De Gruyter, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 64,96

    Envío por EUR 5,50 
    Se envía de Italia a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Condición: new.

  • Idioma: Inglés

    Editorial: Walter De Gruyter Aug 2023, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Rheinberg-Buch Andreas Meier eK, Bergisch Gladbach, AlemaniaRheinberg-Buch Andreas Meier eK

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 59,95

    Envío por EUR 23,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 2 disponibles

    Taschenbuch. Condición: Neu. Neuware -This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. The book includes exercises and solutions and thus lends itself for teaching in the classroom. Englisch.…

  • Idioma: Inglés

    Editorial: Walter De Gruyter Aug 2023, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 59,95

    Envío por EUR 23,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 2 disponibles

    Taschenbuch. Condición: Neu. Neuware -This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. The book includes exercises and solutions and thus lends itself for teaching in the classroom. Englisch.…

  • Idioma: Inglés

    Editorial: Walter De Gruyter Aug 2023, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Wegmann1855, Zwiesel, AlemaniaWegmann1855

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 59,95

    Envío por EUR 25,95 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 2 disponibles

    Taschenbuch. Condición: Neu. Neuware -This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: - This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. - A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. - The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. - The book includes exercises and solutions and thus lends itself for teaching in the classroom.…

  • Idioma: Inglés

    Editorial: De Gruyter, DE, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Rarewaves USA United, HEBRON, KY, Estados Unidos de AmericaRarewaves USA United

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 43,54

    Envío por EUR 45,59 
    Se envía dentro de Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Paperback. Condición: New. This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. The book includes exercises and solutions and thus lends itself for teaching in the classroom.…

  • Idioma: Inglés

    Editorial: Walter De Gruyter Aug 2023, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 71,31

    Envío por EUR 35,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 1 disponible

    Taschenbuch. Condición: Neu. Neuware - This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. The book includes exercises and solutions and thus lends itself for teaching in the classroom.…

  • Más imágenes

    Idioma: Inglés

    Editorial: Walter de Gruyter, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: preigu, Osnabrück, Alemaniapreigu

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 53,60

    Envío por EUR 70,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 1 disponible

    Taschenbuch. Condición: Neu. Process Control in Practice | Tore Hägglund | Taschenbuch | De Gruyter Textbook | X | Englisch | 2023 | Walter de Gruyter | EAN 9783111103723 | Verantwortliche Person für die EU: Walter de Gruyter GmbH, De Gruyter GmbH, Genthiner Str. 13, 10785 Berlin, productsafety[at]degruyterbrill[dot]com | Anbieter: preigu. …

  • Idioma: Inglés

    Editorial: De Gruyter, DE, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 52,31

    Envío por EUR 77,55 
    Se envía de Reino Unido a Estados Unidos de America

    Cantidad disponible: Más de 20 disponibles

    Paperback. Condición: New. This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. The book includes exercises and solutions and thus lends itself for teaching in the classroom.…

  • Idioma: Inglés

    Editorial: Walter De Gruyter Aug 2023, 2023

    3111103722 / 9783111103723

    • Tapa blanda

    Librería: Books-by-Floh, Paderborn, AlemaniaBooks-by-Floh

    Vendedor de 5 estrellas
    Contactar con el vendedor

    Condición: Nuevo

    EUR 72,47

    Envío por EUR 105,00 
    Se envía de Alemania a Estados Unidos de America

    Cantidad disponible: 2 disponibles

    Taschenbuch. Condición: Neu. Neuware -This book covers the most important topics that people working as process control engineers and plant operators will encounter. It focuses on PID control, explains when to use P-, PI-, PD- or PID control as well as PID tuning and includes difficult to control process nonlinearities such as valve stiction or sensor problems. The book also explains advanced control strategies that are necessary when single loop control gives insufficient results. The key features of the text in front of you are: - This book is a result of teaching the material to industrial practitioners over three decades and four previous editions in Swedish, each of which was a refi nement of the previous one. - A key contribution of this book is the careful selection of what is required when you are at a plant and have to make sense of what you see. - The book is written in such a way that it does not assume mathematical knowledge above the compulsory school level. Process control sits between control engineering and process or chemical engineering and often there is a distinct gap between the two. By explaining both the fundamentals of control and the processes the book is written to appeal to control engineers and process engineers alike. - The book includes exercises and solutions and thus lends itself for teaching in the classroom. Englisch.…