open system architecture cim (27 resultados)

kart. Condición: Gut. IX, 212 S. : graph. Darst. , 26 cm Sofort verfügbar / Versand am folgenden Arbeitstag / mit Rechnung / daily shipping worldwide with invoice / ex library / Sprache: Deutsch Gewicht in Gramm: 550.

Condición: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned. Foxing to the page edges/pages.

Condición: Sehr gut. 2nd, rev. and ext. ed. 248 p. In very good condition. ISBN: 9783540562566 Sprache: Englisch Gewicht in Gramm: 383 15,5 x 1,4 x 23,5 cm, softcover.

Condición: Gut. Zustand: Gut | Seiten: 248 | Sprache: Englisch | Produktart: Bücher.

Softcover. Condición: Très bon. Ancien livre de bibliothèque. Edition 1989. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Very good. Former library book. Edition 1989. Ammareal gives back up to 15% of this item's net price to charity organizations.

Condición: Good. 212 pp., ex library, else text clean and binding tight, softcover. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Broschiert. Condición: Gut. 2nd, rev. and ext. edition;. 234 Seiten; Das hier angebotene Buch stammt aus einer teilaufgelösten wissenschaftlichen Bibliothek und trägt die entsprechenden Kennzeichnungen (Rückenschild, Instituts-Stempel.); Schnitt und Einband sind etwas staubschmutzig; der Buchzustand ist ansonsten ordentlich und dem Alter entsprechend gut. Text in ENGLISCHER Sprache! Sprache: Englisch Gewicht in Gramm: 360.

Condición: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Condición: New. In.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Enterprise operation efficiency is seriously constrained by the inability to provide the right information, in the right place, at the right time. In spite of significant advances in technology it is still difficult to access information used or produced by different applications due to the hardware and software incompatibilities of manufacturing and information processing equipment. But it is this information and operational knowledge which makes up most of the business value of the enterprise and which enables it to compete in the marketplace. Therefore, sufficient and timely information access is a prerequisite for its efficient use in the operation of enterprises. It is the aim of the ESPRIT project AMICE to make this knowledge base available enterprise-wide. During several ESPRIT contracts the project has developed and validated CIMOSA: Open System Architecture for CIM. The CIMOSA concepts provide operation structuring based on cooperating processes. Enterprise operations are represented in terms of functionality and dynamic behaviour (control flow). Information needed and produced, as well as resources and organisational aspects relevant in the course of the operation are modelled in the process model. However, the different aspects may be viewed separately for additional structuring and detailing during the enterprise engineering process.

Condición: New. pp. 234 2nd Edition.

Condición: New. pp. 234.

Condición: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Condición: New. pp. 234.

Paperback. Condición: Brand New. 2nd revised edition. 245 pages. 9.25x6.10x0.56 inches. In Stock.

PF. Condición: New.

Condición: Gut. 1. IX, 212 S. Sprache: Englisch Gewicht in Gramm: 969 Taschenbuch, Maße: 16.99 cm x 0 cm x 24.21 cm.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - On Integration computer applications have by now entered almost all enterprises, but mostly in an uncoordinated way without long term integration plans or automation strategies. Departments introduced computing equipment and purchased or developed programs to support their department operations. This approach divided an enterprise into small and almost autonomous enterprises, each with the goal to deploy the computer to make their department and its associated activities work more efficiently. Thus many departments acquired computers, developed and installed automation systems and PCs and educated their staff, announcing this was done to make the work force aware of the large benefits that computers bring. In this fashion the most important functions in an enterprise were more or less computerized (accounting more, CAM and CAD less). In 1986 Europe, the level of computerization in descending order of significance was as follows: Accounting, Inventory Control, Order Entry, Production Planning & Control, Purchasing, Distribution, Sales Planning, Shop Floor Control, Process Control, Quality Control, Manufacturing Engineering (including CAM), and finally Design Engineering (with CAD) [1]. The net result (something that dawned upon us after decades) was that the enterprise consisted of many II islands of ll automation - Moreover, these islands could even be found within departments, where specific functions had been computerized without regard to the impact on the remainder. In the late seventies it became clear that smooth transfer of information between enterprise activities and even within departments was a burden, if at all possible.

Condición: New.

Taschenbuch. Condición: Neu. Neuware -On Integration computer applications have by now entered almost all enterprises, but mostly in an uncoordinated way without long term integration plans or automation strategies. Departments introduced computing equipment and purchased or developed programs to support their department operations. This approach divided an enterprise into small and almost autonomous enterprises, each with the goal to deploy the computer to make their department and its associated activities work more efficiently. Thus many departments acquired computers, developed and installed automation systems and PCs and educated their staff, announcing this was done to make the work force aware of the large benefits that computers bring. In this fashion the most important functions in an enterprise were more or less computerized (accounting more, CAM and CAD less). In 1986 Europe, the level of computerization in descending order of significance was as follows: Accounting, Inventory Control, Order Entry, Production Planning & Control, Purchasing, Distribution, Sales Planning, Shop Floor Control, Process Control, Quality Control, Manufacturing Engineering (including CAM), and finally Design Engineering (with CAD) [1]. The net result (something that dawned upon us after decades) was that the enterprise consisted of many II islands of ll automation ¿ Moreover, these islands could even be found within departments, where specific functions had been computerized without regard to the impact on the remainder. In the late seventies it became clear that smooth transfer of information between enterprise activities and even within departments was a burden, if at all possible.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 224 pp. Englisch.

Paperback. Condición: Like New. Like New. book.

Paperback. Condición: Like New. Like New. book.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Enterprise operation efficiency is seriously constrained by the inability to provide the right information, in the right place, at the right time. In spite of significant advances in technology it is still difficult to access information used or produced by.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Enterprise operation efficiency is seriously constrained by the inability to provide the right information, in the right place, at the right time. In spite of significant advances in technology it is still difficult to access information used or produced by different applications due to the hardware and software incompatibilities of manufacturing and information processing equipment. But it is this information and operational knowledge which makes up most of the business value of the enterprise and which enables it to compete in the marketplace. Therefore, sufficient and timely information access is a prerequisite for its efficient use in the operation of enterprises. It is the aim of the ESPRIT project AMICE to make this knowledge base available enterprise-wide. During several ESPRIT contracts the project has developed and validated CIMOSA: Open System Architecture for CIM. The CIMOSA concepts provide operation structuring based on cooperating processes. Enterprise operations are represented in terms of functionality and dynamic behaviour (control flow). Information needed and produced, as well as resources and organisational aspects relevant in the course of the operation are modelled in the process model. However, the different aspects may be viewed separately for additional structuring and detailing during the enterprise engineering process. 248 pp. Englisch.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Enterprise operation efficiency is seriously constrained by the inability to provide the right information, in the right place, at the right time. In spite of significant advances in technology it is still difficult to access information used or produced by different applications due to the hardware and software incompatibilities of manufacturing and information processing equipment. But it is this information and operational knowledge which makes up most of the business value of the enterprise and which enables it to compete in the marketplace. Therefore, sufficient and timely information access is a prerequisite for its efficient use in the operation of enterprises. It is the aim of the ESPRIT project AMICE to make this knowledge base available enterprise-wide. During several ESPRIT contracts the project has developed and validated CIMOSA: Open System Architecture for CIM. The CIMOSA concepts provide operation structuring based on cooperating processes. Enterprise operations are represented in terms of functionality and dynamic behaviour (control flow). Information needed and produced, as well as resources and organisational aspects relevant in the course of the operation are modelled in the process model. However, the different aspects may be viewed separately for additional structuring and detailing during the enterprise engineering process.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 248 pp. Englisch.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. On Integration computer applications have by now entered almost all enterprises, but mostly in an uncoordinated way without long term integration plans or automation strategies. Departments introduced computing equipment and purchased or developed programs .

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -On Integration computer applications have by now entered almost all enterprises, but mostly in an uncoordinated way without long term integration plans or automation strategies. Departments introduced computing equipment and purchased or developed programs to support their department operations. This approach divided an enterprise into small and almost autonomous enterprises, each with the goal to deploy the computer to make their department and its associated activities work more efficiently. Thus many departments acquired computers, developed and installed automation systems and PCs and educated their staff, announcing this was done to make the work force aware of the large benefits that computers bring. In this fashion the most important functions in an enterprise were more or less computerized (accounting more, CAM and CAD less). In 1986 Europe, the level of computerization in descending order of significance was as follows: Accounting, Inventory Control, Order Entry, Production Planning & Control, Purchasing, Distribution, Sales Planning, Shop Floor Control, Process Control, Quality Control, Manufacturing Engineering (including CAM), and finally Design Engineering (with CAD) [1]. The net result (something that dawned upon us after decades) was that the enterprise consisted of many II islands of ll automation - Moreover, these islands could even be found within departments, where specific functions had been computerized without regard to the impact on the remainder. In the late seventies it became clear that smooth transfer of information between enterprise activities and even within departments was a burden, if at all possible. 224 pp. Englisch.