introduction ansys fluent 2020 de matsson john (15 resultados)

Paperback. Condición: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

Condición: As New. Unread book in perfect condition.

Condición: New.

Paperback. Condición: new. Paperback. As an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulations is often a critical step in verifying that a design will be successful. In this hands-on book, youll learn in detail how to run Computational Fluid Dynamics (CFD) simulations using ANSYS Fluent. ANSYS Fluent is known for its power, simplicity and speed, which has helped make it a world leader in CFD software, both in academia and industry.Unlike any other ANSYS Fluent textbook currently on the market, this book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. You will also learn how to visualize the computed flows in the post-processing phase using different types of plots. To better understand the mathematical models being applied, well validate the results from ANSYS Fluent with numerical solutions calculated using Mathematica.Throughout this book well learn how to create geometry using ANSYS Workbench and ANSYS DesignModeler, how to create mesh using ANSYS Meshing, how to use physical models and how to perform calculations using ANSYS Fluent. The twenty chapters in this book can be used in any order and are suitable for beginners with little or no previous experience using ANSYS. Intermediate users, already familiar with the basics of ANSYS Fluent, will still find new areas to explore and learn. An Introduction to ANSYS Fluent 2020 is designed to be used as a supplement to undergraduate courses in Aerodynamics, Finite Element Methods and Fluid Mechanics and is suitable for graduate level courses such as Viscous Fluid Flows and Hydrodynamic Stability.The use of CFD simulation software is rapidly growing in all industries. Companies are now expecting graduating engineers to have knowledge of how to perform simulations. Even if you dont eventually complete simulations yourself, understanding the process used to complete these simulations is necessary to be an effective team member. People with experience using ANSYS Fluent are highly sought after in the industry, so learning this software will not only give you an advantage in your classes, but also when applying for jobs and in the workplace. This book is a valuable tool that will help you master ANSYS Fluent and better understand the underlying theory. This book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. 1st edition NO-PA16APR2015-KAP.

Paperback. Condición: Brand New. 522 pages. 11.02x8.50x1.02 inches. In Stock.

Paperback / softback. Condición: New. New copy - Usually dispatched within 4 working days. 1240.

Condición: New.

Paperback. Condición: new. Paperback. As an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulations is often a critical step in verifying that a design will be successful. In this hands-on book, youll learn in detail how to run Computational Fluid Dynamics (CFD) simulations using ANSYS Fluent. ANSYS Fluent is known for its power, simplicity and speed, which has helped make it a world leader in CFD software, both in academia and industry.Unlike any other ANSYS Fluent textbook currently on the market, this book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. You will also learn how to visualize the computed flows in the post-processing phase using different types of plots. To better understand the mathematical models being applied, well validate the results from ANSYS Fluent with numerical solutions calculated using Mathematica.Throughout this book well learn how to create geometry using ANSYS Workbench and ANSYS DesignModeler, how to create mesh using ANSYS Meshing, how to use physical models and how to perform calculations using ANSYS Fluent. The twenty chapters in this book can be used in any order and are suitable for beginners with little or no previous experience using ANSYS. Intermediate users, already familiar with the basics of ANSYS Fluent, will still find new areas to explore and learn. An Introduction to ANSYS Fluent 2020 is designed to be used as a supplement to undergraduate courses in Aerodynamics, Finite Element Methods and Fluid Mechanics and is suitable for graduate level courses such as Viscous Fluid Flows and Hydrodynamic Stability.The use of CFD simulation software is rapidly growing in all industries. Companies are now expecting graduating engineers to have knowledge of how to perform simulations. Even if you dont eventually complete simulations yourself, understanding the process used to complete these simulations is necessary to be an effective team member. People with experience using ANSYS Fluent are highly sought after in the industry, so learning this software will not only give you an advantage in your classes, but also when applying for jobs and in the workplace. This book is a valuable tool that will help you master ANSYS Fluent and better understand the underlying theory. This book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Kartoniert / Broschiert. Condición: New. John MatssonAs an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulat.

Taschenbuch. Condición: Neu. Introduction to ANSYS Fluent 2020 | John Matsson | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2020 | SDC Publications | EAN 9781630573966 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.