9783844317039 - machining cost in conventional and hot machining: comparison and modeling: machining cost in room temperature and preheated end-milling of aisi d2 tool steel: comparison and modeling de elhadie, mohamed; mustafizul karim, a.n.; nurul amin, a.k.m. (6 resultados)
- Tapa blanda
Librería: preigu, Osnabrück, Alemaniapreigu
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 51,10
Envío por EUR 70,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 5 disponibles
Taschenbuch. Condición: Neu. Machining Cost in Conventional and Hot Machining: Comparison and Modeling | Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling | Mohamed Elhadie (u. a.) | Taschenbuch | 144 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783844317…039 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling: Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling
Elhadie, Mohamed, Mustafizul Karim, A.N., Nurul Amin, A.K.M.
- Tapa blanda
Librería: Mispah books, Redhill, SURRE, Reino UnidoMispah books
Contactar con el vendedorVendedor de 4 estrellasCondición: Usado - Como Nuevo
EUR 139,64
Envío por EUR 29,22Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Paperback. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Tapa blanda
- Impresión bajo demanda
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AlemaniaBuchWeltWeit Ludwig Meier e.K.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,00
Envío por EUR 23,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room tempe…rature machining (RTM), it has to be economically more attractive besides being better in the context of machinability . In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. 144 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: moluna, Greven, Alemaniamoluna
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 48,50
Envío por EUR 48,99Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: Más de 20 disponibles
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Elhadie MohamedMohamed Elhadie, with masters degree in manufacturingengineering, from the International Islamic University Malaysia(IIUM), 2011. A.N. Mustafizul Karim, an associate professor in the depa…rtmentof manufacturing and mate.
- Tapa blanda
- Impresión bajo demanda
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemaniabuchversandmimpf2000
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,00
Envío por EUR 60,00Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperatu…re machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 144 pp. Englisch.
- Tapa blanda
- Impresión bajo demanda
Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 59,00
Envío por EUR 61,17Se envía de Alemania a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperatur…e machining (RTM), it has to be economically more attractive besides being better in the context of machinability . In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students.
