9780412396908 - Powder Surface Area and Porosity: 2 (Particle Technology Series, 2) de Shields, Joan E.; Lowell, Seymour (14 resultados)

hardcover. Condición: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!

Condición: Used: Very Good. 1991 hardcover no dust jacket as issued 3rd ed has age staining along edge of pages clean text 250 pages H-1.

hardcover. Condición: Acceptable. Ex-library with usual stamps, stickers and markings This is a damaged book. May be ex-library, water-damaged, or spine creased/broken. Acceptable, Reading copy only, with writing/markings and heavy wear. Standard-sized.

Condición: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,550grams, ISBN:9780412396908.

Condición: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Condición: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Condición: New. In.

Condición: New. Divided into two parts, this volume covers theoretical as well as experimental aspects of powder characterization. Topics covered include adsorption, microporosity, hysteresis, measurements, chemisorption and particle size analysis. Series: Particle Technology Series. Num Pages: 252 pages, biography. BIC Classification: TGM. Category: (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 297 x 210 x 15. Weight in Grams: 553. . 1991. 3rd ed. 1991. Hardback. . . . .

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity, density, and particle size of powders. It may be found useful by those with little or no training in solid surfaces who have the need to learn quickly the rudiments of surface area, density, pore size, and particle size measurements. S. Lowell J.E. Shields Symbols Use of symbols for purposes other than those indicated in the following table are so defined in the text. Some symbols not shown in the table are also defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential permeability aspect factor f F flow rate; force; feed rate g gravitational constant G Gibbs free energy S G free surface energy h heat of immersion per unit area; height H enthalpy heat of immersion Hi heat of adsorption Hsv BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant C length L heat of liquefaction M mass M molecular weight MPa megapascals number of moles n number of molecules; number of particles N N Avogadro's num'ber molecular collisions per square cm per second.

Condición: New. Divided into two parts, this volume covers theoretical as well as experimental aspects of powder characterization. Topics covered include adsorption, microporosity, hysteresis, measurements, chemisorption and particle size analysis. Series: Particle Technology Series. Num Pages: 252 pages, biography. BIC Classification: TGM. Category: (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 297 x 210 x 15. Weight in Grams: 553. . 1991. 3rd ed. 1991. Hardback. . . . . Books ship from the US and Ireland.

Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity, density, and particle size of powders. It may be found useful by those with little or no training in solid surfaces who have the need to learn quickly the rudiments of surface area, density, pore size, and particle size measurements. S. Lowell J.E. Shields Symbols Use of symbols for purposes other than those indicated in the following table are so defined in the text. Some symbols not shown in the table are also defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential permeability aspect factor f F flow rate; force; feed rate g gravitational constant G Gibbs free energy S G free surface energy h heat of immersion per unit area; height H enthalpy heat of immersion Hi heat of adsorption Hsv BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant C length L heat of liquefaction M mass M molecular weight MPa megapascals number of moles n number of molecules; number of particles N N Avogadro's num'ber molecular collisions per square cm per second 266 pp. Englisch.

Gebunden. Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an in.

Buch. Condición: Neu. Powder Surface Area and Porosity | S. Lowell (u. a.) | Buch | xii | Englisch | 1991 | Springer | EAN 9780412396908 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.

Buch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity, density, and particle size of powders. It may be found useful by those with little or no training in solid surfaces who have the need to learn quickly the rudiments of surface area, density, pore size, and particle size measurements. S. Lowell J.E. Shields Symbols Use of symbols for purposes other than those indicated in the following table are so defined in the text. Some symbols not shown in the table are also defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential permeability aspect factor f F flow rate; force; feed rate g gravitational constant G Gibbs free energy S G free surface energy h heat of immersion per unit area; height H enthalpy heat of immersion Hi heat of adsorption Hsv BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant C length L heat of liquefaction M mass M molecular weight MPa megapascals number of moles n number of molecules; number of particles N N Avogadro's num'ber molecular collisions per square cm per secondSpringer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 266 pp. Englisch.