Spie press bellingham (67 resultados)

Condición: Very Good. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

Ex-library copy but with no exterior markings as such and fairly minimal interior markings. xiv, 393 pages. Hardcover: H 28.5cm x L 22.25cm. Dust jacket with minor bumping at spine and flap folds ends. Purple cloth with silver stamping to spine; two small patches of residue from removed tape strips at rear board's top and bottom margins. Front pastedown has vertical swath of black marker and some surface peeling from removal of library stickers; patch of peeling to rear pastedown; swath of black marker to rear free endpaper; library pencil notations upon title page; no other library markings readily apparent upon a quick perusal and interior leaves are otherwise bright and clean. Binding retains some crispness. With Preface, Acknowledgements, color and b/w illustrations, Appendix, Notes, Bibliography, and Index. Please note that this large book has an approximate shipping weight of 5 pounds (2.26 kg) and may require additional postage for any postal class other than domestic Media Mail. ISBN 0271019778.…

Soft cover. Condición: Very Good. 1st Edition. Older edition, newer version published in 2016. Illustrations, photographs, charts, graphs, equations and the such throughout. Minor edge wear, light creases to the corners, minimal surface wear. Text clean.

Spiral. Condición: new. Spiral. The past two decades have seen significant innovation in teaching methods for science, technology, engineering, and mathematics (STEM) fields. This innovation has been driven by development of new educational technologies and methods that were accelerated in 2020 and 2021 by the explosion of remote teaching due to COVID-19. The teaching of optics, being a highly specialized STEM field, has much in common with other areas, but has its own unique challenges. This volume explores individual experiences with the development of methods and their application to the teaching of optics, especially in higher education. The volume is dedicated to the memory of Professor John Greivenkamp, who passed away in early 2022 and was among the best known and most passionate educators of optics in the world. Explores individual experiences with the development of methods and their application to the teaching of optics, especially in higher education. The volume is dedicated to the memory of Professor John Greivenkamp, who was among the best known and most passionate educators of optics in the world. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Paperback. Condición: new. Paperback. This book describes the author's experience in the process of moving from child to scientist. Duncan T. Moore calls Greenler an Ambassador for Science and writes in the foreword that he has done more than many Nobel Prize winners to bring the excitement of science and engineering to everyone. This book is a personal account that will be read with interest by a young person contemplating a career in science, by a scientist who has gone through such a process, and by a nonscientist who has an interest in how the enterprise of science works. Tracing the journey from childhood wonder to scientific achievement, this personal account reveals the challenges and excitement of discovery in science and engineering. Vivid insights into the process of innovation invite both aspiring scientists and curious readers to explore the world of research. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Paperback. Condición: Very Good. 8vo, paperback. Vg+ condition. Non-circulating ex-lib copy w/ stamp on cover, stamps & label on endpaper (only markings); interior pristine, unread. xiii, 405 p. Sponsored by SPIE--The International Society for Optical Engineering ; cooperating organizations, NARSIA--North American Remote Sensing Industries Association [and] ASPRS--American Society for Photogrammetry and Remote Sensing.; Society of Photo-optical Instrumentation Engineers. …

Original Wrappers. Condición: Near Fine. No Dust Jacket. First Edition; First Impression. Title page slightly crinkled due to tight binding. Slight shelfwear.; 8vo; xi. 108 pages.

Condición: Near Fine. Hardcover, [xvii], 422 pages. Near Fine condition. Second edition. Size 9.25"x6.25". "This revised and expanded edition includes: Automated Testing; Uncertainty Analysis; and System Descriptions. Test methods for: FLIRs; IRST; Machine Vision; and Line Scanners." Book has very light exterior shelfwear, else As New, clean and unmarked.…

Hardcover. Condición: Good. No Dust Jacket. First Edition. An ex-library copy in original pictorial hard covers of this 592-page volume. The usual ex-libris markings. The binding is sound, the text is clean/unmarked, and there is little cover wear. No dust jacket, apparently as issued. Book.

paperbound, 8vo xii+161 pp., ills. radiation thermometers; very good condition.

Paperback. Condición: new. Paperback. This book presents one perspective on moving from the world of academic and government supported basic research on scientific questions to performing applied research for industry meant to address specific problems to improve cost, quality, and productivity in durable and consumer good manufacturing, where fast return on investment and long-term stability are driving factors. This book is not a book on business practices or starting a business but rather a tutorial to help the researcher make the transition from the academic world of new ideas to conducting successful industrial research for solving problems within existing manufacturing to make good parts. Topics covered in this book include: Getting started by learning about manufacturing problems and evaluating possible solutions, Getting started by learning about manufacturing problems and evaluating possible solutions, Developing a value proposition from a thorough definition of the efforts required and the realistic expected benefit of the efforts in a quantitative manner,Developing a good execution plan to implement the results of the research that includes all the necessary participants, and Identifying the path to support the developed solution in the shop. The field of application for this book is durable and consumer goods manufacturing in existing businesses. Transitioning from academic research to industrial application, this tutorial guides researchers in addressing real manufacturing challenges by assessing production issues, quantifying value propositions, and planning strategic implementation to secure lasting support and drive measurable improvements. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Paperback. Condición: Fine. First edition, second printing. Softcover in glossy wraps. Second printing of first edition. Book is crisp and clean, without any notations in text. Former owner's name is on corner of front free endpage. 4to. 166 pp. including index.

Hardcover. Condición: Very Good. Original red cloth. Ex-library with spine label, due date slip, and university library stamps, else Very Good. No Dust Jacket.

Paperback. Condición: new. Paperback. The speckle phenomenon is ubiquitous, occurring in all regions of the electromagnetic spectrum, as well as in both ultrasound and synthetic-aperture-radar imaging. Speckle occurs whenever radiation is reflected from a surface that is rough on the scale of a wavelength, or is passed through a diffusing surface that introduces random path-length delays on the scale of a wavelength. This book is devoted to simulation of speckle phenomena using the software package Mathematica. Various techniques for simulating speckle are discussed. Simulation topics include first-order amplitude and intensity statistics, speckle phenomena in both imaging and free-space propagation, speckle at low light levels, polarization speckle, phase vortices in speckle, and speckle metrology methods. Devoted to simulation of speckle phenomena using the software package Mathematica. Various techniques for simulating speckle are discussed. Simulation topics include first-order amplitude and intensity statistics, speckle phenomena in both imaging and free-space propagation, speckle at low light levels, and polarization speckle. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Paperback. Condición: new. Paperback. This book is an English translation of Die Lehre von der Bildentstehung im Mikroskop von Ernst Abbe, the only published detailed account of Abbe's theory of image formation in the microscope. The original German edition, written and published by Otto Lummer and Fritz Reiche in 1910, was an expanded version of the lectures given by Abbe in 1887. The book presents an introduction to geometrical optics, discusses image formation theory based on optical diffraction, and deals with optical images of several kinds of objects being illuminated on and off axis. It also introduces coherent imaging as two back-to-back diffraction processes and discusses the resolution limit of an imaging system. The book concludes with a discussion of the effect of artificial blocking of certain diffraction orders on the final image.This translation, which includes annotations and other added material, can serve as a self-study book for readers who wish to learn optics and optical image formation. It is also a tribute to the original authors' scientific achievements and devotion to the teaching and dissemination of precious knowledge. Presents an introduction to geometrical optics, discusses image formation theory based on optical diffraction, and deals with optical images of several kinds of objects being illuminated on and off axis. It also introduces coherent imaging as two back-to-back diffraction processes and discusses the resolution limit of an imaging system. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Condición: Very Good. Hardcover, [xxi], 689 pages. Very Good condition. Size 11.25"x8.75". Section headings: 1 - Evolution and Background; 2 - Speckle Interferometry; 3 - High Image Density PIV; 4 - Image Analysis Using the Fringe Method; 5 - Optical Correlation Analysis; 6 - Particle Seeding Considerations; 7 - Low Image Density PIV; 8 - Direction Ambiguity Resolution; 9 - Light Source Properties; 10 - Processing Methods; 11 - Three Component Methods; 12 - Applications. Includes Author Index and Subject Index. Book has moderate handling/shelfwear. Previous owner's name on front fly. Interior text is clean and unmarked.…

Condición: BUONO USATO. Critical reviews of optical science and technology INGLESE Conferenza tenutasi a San Diego, California, 12 - 13 luglio 1993. Brossura editoriale in cartoncino flessibile, dalla copertina illustrata, leggermente annerita. Buonissimo lo stato di conservazione, pagine perfettamente tenute, velate in tonalità avorio, come i tagli, ricche di grafici, figure in nero e formule, nel testo. Volume n. XLIX ( 49 ) della collana. Numero pagine 379.…

Paperback. Condición: new. Paperback. This book presents a simple yet elegant introduction to classical optics focused primarily on establishing fundamental concepts for students new to the field. With examples demonstrating the use of optics in a wide range of practical applications, it reflects the pedagogical approach used by Prof. Mejia-Barbosa to teach his Fundamentals of Optics course at the Universidad Nacional de Colombia. This book will prove useful for undergraduate and graduate students of physics, optical science and engineering, and any other related science or engineering discipline that deals with optics at some level. Readers are invited to study the fundamental principles of optics and find pleasure in learning about this fascinating and vibrant field. Presents a simple yet elegant introduction to classical optics focused primarily on establishing fundamental concepts for students new to the field. With examples demonstrating the use of optics in a wide range of practical applications, it reflects the pedagogical approach of the author. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Spiral. Condición: new. Spiral. The past two decades have seen significant innovation in teaching methods for science, technology, engineering, and mathematics (STEM) fields. This innovation has been driven by development of new educational technologies and methods that were accelerated in 2020 and 2021 by the explosion of remote teaching due to COVID-19. The teaching of optics, being a highly specialized STEM field, has much in common with other areas, but has its own unique challenges. This volume explores individual experiences with the development of methods and their application to the teaching of optics, especially in higher education. The volume is dedicated to the memory of Professor John Greivenkamp, who passed away in early 2022 and was among the best known and most passionate educators of optics in the world. Explores individual experiences with the development of methods and their application to the teaching of optics, especially in higher education. The volume is dedicated to the memory of Professor John Greivenkamp, who was among the best known and most passionate educators of optics in the world. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

4°, OKarton, paperback. Condición: Gut. Auflage: illustrated. xii, 160 S. Einband etwas berieben, innen sehr gut erhalten. Sprache: Englisch Gewicht in Gramm: 321.

Paperback. Condición: new. Paperback. Computational Fourier Optics is a text that shows the reader in a tutorial form how to implement Fourier optical theory and analytic methods on the computer. A primary objective is to give students of Fourier optics the capability of programming their own basic wave optic beam propagations and imaging simulations. The book will also be of interest to professional engineers and physicists learning Fourier optics simulation techniques-either as a self-study text or a text for a short course. For more advanced study, the latter chapters and appendices provide methods and examples for modelling beams and pupil functions with more complicated structure, aberrations, and partial coherence. For a student in a course on Fourier optics, this book is a concise, accessible, and practical companion to any of several excellent textbooks on Fourier optical theory. Demonstrates in a tutorial form how to implement Fourier optical theory and analytic methods on the computer. Its primary objective is to give students of Fourier optics the capability of programming their own basic wave optic beam propagations and imaging simulations. It will also help professional engineers and physicists learning Fourier optics simulation techniques. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Paperback. Condición: new. Paperback. This book describes the author's experience in the process of moving from child to scientist. Duncan T. Moore calls Greenler an Ambassador for Science and writes in the foreword that he has done more than many Nobel Prize winners to bring the excitement of science and engineering to everyone. This book is a personal account that will be read with interest by a young person contemplating a career in science, by a scientist who has gone through such a process, and by a nonscientist who has an interest in how the enterprise of science works. Tracing the journey from childhood wonder to scientific achievement, this personal account reveals the challenges and excitement of discovery in science and engineering. Vivid insights into the process of innovation invite both aspiring scientists and curious readers to explore the world of research. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

Hardcover. Condición: Very Good. No Jacket. 393 pp, b/w and colour photos. Boards have light edgewear, lightly bumped bottom corners. Interior unmarked, binding tight.

Paperback. Condición: new. Paperback. This book demonstrates how to design an optical system using Ansys Zemax OpticStudio, a full-featured optical design program. The complete design process from lens definition to tolerancing is developed and illustrated using the program. This text is not a user's manual for Zemax OpticStudio. Rather, it starts with a single lens to demonstrate the laws of geometrical optics and illustrate basic optical errors (aberrations) with the software.Through a series of examples and exercises, one can follow each step in the design process to analyze and optimize the system to meet the required performance specifications. The text is organized to help readers (1) reproduce each step of the process, including the plots for evaluating lens performance, and (2) understand the significance of these plots in constructing a final design. Demonstrates how to design an optical system using Ansys Zemax OpticStudio, a full-featured optical design program. The complete design process from lens definition to tolerancing is developed and illustrated using the program. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Hardcover. Condición: Gut. 615 S. Ehem. Bibliotheksexemplar mit Signatur und Stempel. GUTER Zustand, ein paar Gebrauchsspuren. Ex-library with stamp and library-signature. GOOD condition, some traces of use. A0424 819440507 Sprache: Englisch Gewicht in Gramm: 1900.

Paperback. Condición: Very Good -. First Paperback Edition. 280 x 215mm. pp. 310. English text. Collected volume of papers on the science relating to Gaussian Beam Mode optics and millimeter-wave / terahertz systems. Black and white illustrations. Bound in original blue wraps. Library marks to first few pages and base of spine. A little light overall wear. Binding strong. No underlining. Ex-Library.…

Paperback. Condición: new. Paperback. This book presents one perspective on moving from the world of academic and government supported basic research on scientific questions to performing applied research for industry meant to address specific problems to improve cost, quality, and productivity in durable and consumer good manufacturing, where fast return on investment and long-term stability are driving factors. This book is not a book on business practices or starting a business but rather a tutorial to help the researcher make the transition from the academic world of new ideas to conducting successful industrial research for solving problems within existing manufacturing to make good parts. Topics covered in this book include: Getting started by learning about manufacturing problems and evaluating possible solutions, Getting started by learning about manufacturing problems and evaluating possible solutions, Developing a value proposition from a thorough definition of the efforts required and the realistic expected benefit of the efforts in a quantitative manner,Developing a good execution plan to implement the results of the research that includes all the necessary participants, and Identifying the path to support the developed solution in the shop. The field of application for this book is durable and consumer goods manufacturing in existing businesses. Transitioning from academic research to industrial application, this tutorial guides researchers in addressing real manufacturing challenges by assessing production issues, quantifying value propositions, and planning strategic implementation to secure lasting support and drive measurable improvements. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

Paperback. Condición: new. Paperback. Survey investigations, with the end goal of monitoring the entire celestial sphere, have become a priority in astronomy. This book is the first monograph devoted to wide-field telescopes, intended to bridge the gap between astronomers and professional opticians. It emphasizes the deep connection between classical and new telescopes, as well as the continuity of ideas underlying the development of telescope construction. The contents are presented in the simplest form to promote a clear understanding of new designs; descriptions of optical systems are accompanied by extensive graphic information provided by Zemax. Both exact modern optimization and the theory of aberrations are used in explanations, with the former given priority. Survey investigations, with the end goal of monitoring the entire celestial sphere, have become a priority in astronomy. This is the first book devoted to wide-field telescopes, intended to bridge the gap between astronomers and professional opticians. It emphasizes the deep connection between classical and new telescopes. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. …

Paperback. Condición: new. Paperback. Illumination is a crucial element in many applications, matching the luminance of the scene with the operational range of a camera. When luminance cannot be adequately controlled, a high dynamic range (HDR) imaging system may be necessary. These systems are being increasingly used in automotive on-board systems, road traffic monitoring, and other industrial, security, and military applications. This book provides readers with an intermediate discussion of HDR image sensors and techniques for industrial and non-industrial applications. It describes various sensor and pixel architectures capable of achieving HDR imaging, as well as software approaches to make high dynamic range images out of lower dynamic range sensors or image sets. Some methods for automatic control of exposure and dynamic range of image sensors are also introduced. This edition introduces CMOS pixel and image sensor design concepts and circuits. Provides an intermediate discussion of high dynamic range (HDR) image sensors and techniques for industrial and non-industrial applications. The book describes various sensor and pixel architectures capable of achieving HDR imaging, as well as software approaches to make high dynamic range images out of lower dynamic range sensors or image sets. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Paperback. Condición: new. Paperback. This book describes the author's experience in the process of moving from child to scientist. Duncan T. Moore calls Greenler an Ambassador for Science and writes in the foreword that he has done more than many Nobel Prize winners to bring the excitement of science and engineering to everyone. This book is a personal account that will be read with interest by a young person contemplating a career in science, by a scientist who has gone through such a process, and by a nonscientist who has an interest in how the enterprise of science works. Tracing the journey from childhood wonder to scientific achievement, this personal account reveals the challenges and excitement of discovery in science and engineering. Vivid insights into the process of innovation invite both aspiring scientists and curious readers to explore the world of research. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…