Stoeckhert k (17 resultados)

345, 72 S., OKunststoff m. weißer Beschriftung., 2. erweiterte Auflage., Mit 54 Abb., Name auf Titel., sonst gut., [Tech_1] Sprache: Deutsch 0 700 gr.

Condición: guter Zustand.

paperback. Condición: acceptable. Kunststoff-Lexikon. Herausgegeben von Dr. K. Stoeckhert. Carl Hanser Verlag München 1953. Broschur mit Kunstlederüberzug, 306 + 56 Seiten mit 47 Abbildungen, gestempelte Besitzvermerke, etw. randfleckig.

21 cm. original cloth. 288 pp. ills, diagrams. -(libr label, library stamps, with plasticized cover, otherwise good). 410g.

3. erweit. Aufl. Hanser Vlg. München. 1961. 408 und 142 S. m. 58 Abb. (vom Anhang einige Seiten verklebt). Plastik.-2).

19 x 12. 3. erweiterte Auflage. 408+145 Seiten. Mit 58 Abbildungen. Flexibler Orig.Kunststoffeinband. Ordnungsgemäß aus einer Universitäts-Bibliothek ausgesondert (Stempel, Rückenschild). Sauberes, sehr gut erhaltenes Exemplar. Sprache: Deutsch Gewicht in Gramm: 700.

19 cm. original plastic softcover. 1112 pp. many ills, diagrams. -(libr label, library stamps, otherwise (very) good). 1130g.

Hardcover. Condición: new. Hardcover. The Mold-Making Handbook has proven to be an essential resource for the plastics engineer who handles the design and construction of tools for different processing methods, from injection molding and blow molding, to prototyping tools, including their computer-aided design.The present edition has been completely updated with new chapters including micro injection molds, molds for the rubber industry, and rapid prototyping. Separate sections describe the tool materials and various manufacturing and processing methods. Each chapter is self-contained; the proposed synergistic effect is achieved especially when the reader not only reads his chapter, but is willing to look outside the box of his own specialist field.This handbook is for both the reader who is looking for an introduction to a key area of plastics processing as well as the pronounced specialist to enable quick reading into related technical areas. Written by experts from the industry, the book captures the current state of the technique. The Mold-Making Handbook will prove extremely useful for engineers, designers, processors, technical salesmen, and students interested in all aspects of mold construction. An essential resource for the plastics engineer who handles the design and construction of tools for different processing methods, from injection molding and blow molding, to prototyping tools, including their computer-aided design. This edition has been completely updated with new chapters including micro injection molds, molds for the rubber industry, and rapid prototyping. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Hardcover. Condición: new. Hardcover. The Mold-Making Handbook has proven to be an essential resource for the plastics engineer who handles the design and construction of tools for different processing methods, from injection molding and blow molding, to prototyping tools, including their computer-aided design.The present edition has been completely updated with new chapters including micro injection molds, molds for the rubber industry, and rapid prototyping. Separate sections describe the tool materials and various manufacturing and processing methods. Each chapter is self-contained; the proposed synergistic effect is achieved especially when the reader not only reads his chapter, but is willing to look outside the box of his own specialist field.This handbook is for both the reader who is looking for an introduction to a key area of plastics processing as well as the pronounced specialist to enable quick reading into related technical areas. Written by experts from the industry, the book captures the current state of the technique. The Mold-Making Handbook will prove extremely useful for engineers, designers, processors, technical salesmen, and students interested in all aspects of mold construction. An essential resource for the plastics engineer who handles the design and construction of tools for different processing methods, from injection molding and blow molding, to prototyping tools, including their computer-aided design. This edition has been completely updated with new chapters including micro injection molds, molds for the rubber industry, and rapid prototyping. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

Kevelaer, Butzon & Bercker 1950. 286 S. m. Abb. a. Taf. OHLeder, 8°.

8.,aktualisierte und erweiterte Auflage, ca 19,5 x 12,5 cm Kunststoff des Einbandes gewellt, Besitzstempel und Vermerk im Vorsatz (Werkbibliothek), ansonsten im sehr guten Zustand. O-Kunststoff mit Lesebändchen 680 Seiten + Bezugsquellennachweis.

Tapa dura. Numerosas ilustraciones 252 Técnicos.

7.,neubeitete Auflage, ca 19,5 x 12,5 cm Untere Einbandkante mit 2 kleinen Dellen, Schnitt angegraut, ansonsten im guten Zustand. O-Kunststoff mit Lesebändchen Seiten.

3. Aufl. Hanser, München, 1961. 408 S. mit 58 Abb.u. über 3350 Stichwörtern., Kunstsoff-Ebd. (StaV.)--- 600 Gramm.

8., aktualisierte und erweiterte Auflage. 680, 73, 16 S. Flexibler Orig.-Kunststoffband. - Sehr guter Zustand innen und außen.

2., erweiterte Auflage. Mit 54 Abbildungen. 345, 72 S. (Anzeigenanhang). Original-Kunststoffeinband. - Gut erhaltenes Exemplar.

8° Oktav, Sondereinband. 6., neu bearbeitete Auflage. 704 S. Mit 62 s/w Abb. und mit zahlr. s/w Anzeigen. Gutes Exemplar. F 1.5 3446120459 Sprache: Deutsch Gewicht in Gramm: 850.