Rizzo james g (9 resultados)

paperback. Condición: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Hardcover. Condición: Near Fine. Two volume set. Books have very light wear to edges and light finger smudges. Otherwise, presents as nearly new with crisp, unmarked pages and solid binding.

Soft cover. Condición: Very Good. 1st Edition. The covers have a touch of edge wear. In this book James Rizzo describes in detail the two earliest surviving hot air engines, and how to build working replicas, or reduced sized models of them. The two engines concerned are those which Robert Stirling presented to the University of Edinburgh, and slightly later, to the University of Glasgow, to demonstrate his 'Air Engine'. The exact dates these were built is not known, but were certainly before 1825. The Edinburgh model is the more original, as the Glasgow model was discovered in an old store by Prof. William Thomson, later Lord Kelvin, in 1847. He dismantled it to see how it worked, and restored it to working order, along the way establishing the Absolute Scale of Temperature, the term "energy" and invented the name of a new science - Thermodynamics. Both models are now very fragile, but James was granted unprecedented access to measure and inspect them by both Universities. From the resulting drawings James made half-size models of both engines, but whilst the building instructions here refer to these models, the drawings are dimensioned full size, with metric and decimal inch measurements for accurate conversion. Hardwoods were used considerably in the original engines, but other than possibly for the flywheel (12 inch diameter in the original), no castings are required. Whilst they may look similar, there are considerable differences between the two prototypes, so that making replicas or models of both is far from an exercise in repetition. This book is an important historic record of two unique survivors from the very early days of mechanisation, and a tremendous 'projects' book, providing the model engineer with full drawings and building instructions to build replicas, or models of both these fascinating engines. 100 page, high quality paperback, full of drawings and photographs of all parts of the engines. Size: 4to - over 9¾ - 12" tall. Book.…

Hardcover. Condición: Good. Boards bumped at corners. Pages clean and tightly bound.

Paperback. Condición: Very Good. Paperback. Very Good. All orders shipped securely in a bubble envelope or box/hard mailer.

Hardcover. Condición: Fine. Book is in fine condition. Green cloth board with gilt lettering. 137pp with 12 appendix.

Condición: New. Satisfaction Guaranteed or your money back.

paperback. Condición: Very Good. Very Good. Dust Jacket may NOT BE INCLUDED.CDs may be missing. SHIPS FROM MULTIPLE LOCATIONS. book.

Hardcover. Condición: Very Good. No Jacket. 1st Edition. Candem Miniature Steam Services, 1995. 1st Edition . Very Good/No Jacket. pp183. Folio. Green cloth binding with gilt lettering. BW illustrations and colour photographs. Tucked in supplier's pricelist. VG+.