Headlam morley k (19 resultados)

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Condición: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Condición: New. New Book. Shipped from UK. Established seller since 2000.

1st ed. Owner's name on front free end paper; no inscriptions or annotations; binding tight; covers worn and stained, with faded spine. Used - Good. Good hardback in brown cloth Used - Good. Good hardback in brown cloth.

Condición: Used - Good. Good hardback. 1st ed. Binding tight; spine bumped at head & foot, with wear to cloth; boards a little stained. Used - Good. Good hardback.

Hardcover. Condición: Very Good. Octavo, 374 pages + indexes, illustrated. Contains: Part I - Bone et al: An Experimental Enquiry into the Interactions of Gases and Ore in the Blast-Furnace; Matuschka: Solidification in Open-Topped and Closed-Topped Ingot Moulds; Richards: The Atmospheric Corrosion of Glavanised Iron Wire and its Bearing on Specification Testing; Austin & Nickol: Comparison of the Tensile Deformation Characteristics of Alloys at Elevated Temperatures; Edwards et al: Influence of Composition and Treatment on the Rate of Acid Attack on Mild Steel: Harrison: The Effects of Copper on Some Alloy Steels: Jones & Gray: Martensitic Grains in Rapidly-Cooled Ingot Iron and Mild Steel; Jones & Heselwood: The Effect of Chromium and Carbon Contents on the Coefficients of Thermal Expansion of Chromium Steels; Maurer & Haderer: The Exact Quantitive Estimation of ferric Oxide and Sulphide Sulphur in Basic Slags; Stead: Note on Brittle Nickel Steel; The Application of Time Study to Rolling Mills; Section II - A Survey of Literature on the Manufacture and Properties of Iron and Steel, and Kindred Subjects.…

Hardcover. Condición: Good. Octavo, 368 pages + indexes, illustrated. Covers marked (looks as if something has been spilt on the rear cover. Contains: Section I Bradley & Goldschmidt: An X-Ray Investigation of the Iron-Rich Nickel-Iron Alloys; Genders & Harrison: Niobium-Iron Alloys; Griffiths: The Causes of "Roll-Marks" on Tinplate; Hoar & Morris: The Influence of the Steel-base Composition on the Rate of Formation of Hydrogen-Swells in Canned-Fruit Tinplate Containers. - Part 1; Transformation of Austenite on Cooling - Morphology and Genesis of the Aggregates Formed; Jones & Morgan: Antimony in Mild Steel; Kalling & Rennerfelt: Decarburisation of Granulated Pig Iron - The "R.K." Process; Norbury: The Effect of casting Temperature on the Primary Microstructure of Cast Irons: Swift: Tensional Effects of Torsional Overstrain in Mild Steel; Ninth Report on the Heterogeneity of Steel Ingots; Section II A Survey of Literature on the Manufacture and Properties of Iron & Steel, and Kindred Subjects.…

Hardcover. Condición: Fair. Octavo, 396 pages plus indexes.Covers marked and shaken and volume a bit dusty but contents good. Contains: Blayden, Noble & Riley: The Influence of Carbonising Conditions on Coke Properties Part II; Colbeck & Garner: The Effect of Nitrogen Additions and Heat Treatment on the Properties of High-Chromium Steels; Russell: The Interpretation of Thermal Curves and some Applications to Ferrous Alloys; Betteridge: Nickel-Iron-Aluminium Permanent-Magnet Alloys; Barker: Some Applications of the Spectrograph to the Quantitative Analysis of ferrous and Non-Ferrous Metals; Lawrie: The Refining of Metal in the Basic Open-Hearth Furnace. The Influence of Flurospar on the Process; Styri: Slag Inclusions and Acid Open-Hearth Refining of High-Carbon Steel; Northcott: The Application of the Durville Rotatory process to the Casting of Steel; Rees: A Note on the Slow Cooling of Ingots; Wilson: The Rolling of Sections at the Appleby-Frodingham Steel Company; Edwards, Jones & Walters: A Study of Strain-Age-Hardening of Mild Steel; Rodgers & Wainwright: The Strain-Aeging of Dead-Mild Steel Strip used in the Pressing of Automobile Bodies and Accessories; Sykes & Jones: Note on the Discontinuities in the Resistance-Temperature Curves of Commercially Pure Iron & Steel; Escher: Ten Years' Development in Steam Engineering at the Port Kembla Steelworks, N.S.W. Australia.…

Hard Back/Hard Covers. Condición: Good ++. No Dustjacket. No dustjacket. xiv + 368 pages + subject and name indices (65 pages) B&W plates, fold-out plans and plates and diagrams in text. Fascinating book. Maroon hardback binding with lightly rubbed boards with wear to spine-ends and lighter wear to boards' corners, light rubs to boards' edges and spine-junctions. Spine is lightly colour-faded. Binding is sound. Ink stamp insittiute address to early and last pages, page-edges lightly browned o/w pages very clean. Size: 8 3/4" Tall. Ex-Institute Library.…

Condición: Used - Very Good. VG hardback. Burgundy cloth binding with gilt titles on spine; damp mark affecting lower half of front and rear boards and rear end paper. Internally neat and tidy with many diagrams, photographic images, figures and folded plates.

1st ed. A tidy copy in tight binding; edge of front board faded; back board discoloured by mildew; spine faded & bumped. This is a heavy book (about 2kg packed); additional postage may be required Used - Acceptable. Fair hardback in brown cloth Used - Acceptable. Fair hardback in brown cloth.

Nº II. Vol. CXXXVIII. 518+418+77 pp. Piel editorial. Buen estado. Idioma: inglés. Ilustrado con láminas en b/n, figuras y gráficos desplegables.

Hard Cover. Condición: Good. No Jacket. First Edition. From an academic library with the usual stamps etc. Library binding. This item is heavy and will attract postal surcharges. A00021623.

Hard Cover. Condición: Good. No Jacket. First Edition. From an academic library with the usual stamps etc. Library binding. This item is heavy and will attract postal surcharges. A00021621.

Hard Cover. Condición: Good. No Jacket. First Edition. From an academic library with the usual stamps etc. Library binding. This item is heavy and will attract postal surcharges. A00021622.

Hard Cover. Condición: Good. No Jacket. First Edition. From an academic library with the usual stamps etc. Library binding. This item is heavy and will attract postal surcharges. A00021620.

Hard Cover. Condición: Good. No Jacket. First Edition. From an academic library with the usual stamps etc. Library binding. This item is heavy and will attract postal surcharges. A00021624.

Paperback. Condición: New. Print on Demand. This book is a collection of papers presented at the Annual General Meeting of The Iron and Steel Institute, held in London in May 1941. The papers cover a wide range of topics related to the manufacture and properties of iron and steel, including the influence of turbulence on the structure and properties of steel ingots, intercrystalline cracking in boiler plates, the thermal relations between ingot and mould, and the polishing of cast iron micro-specimens. The papers provide a valuable overview of the state of the art of iron and steelmaking in the early 20th century and are a valuable resource for researchers and practitioners in the field. This book is a reproduction of an important historical work, digitally reconstructed using state-of-the-art technology to preserve the original format. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in the book. print-on-demand item.…