E arzt (48 resultados)

Hardcover. Condición: Very Good. Estado de la sobrecubierta: Very Good. 1st Edition/Volume 262. 572 pp. Vol. 262 only! Stated first edition! Over-sized and/or over weight book; may require extra postage. Please note that large and/or heavy items may incur an additional shipping charge. Solidly bound copy and dust jacket with moderate external wear, crisp pages and clean text. Small tear on top of spine of dust jacket. Robin Arzt (Art Director) (ilustrador).…

Soft cover. Condición: Very Good. Spine intact and with very few marks on pages and no highlighting. Slight discolouration to page edges.

Soft cover. Condición: Near Fine. A very clean, bright copy - no inscriptions.

Condición: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

23 cm. original hardcover. 726 pp. ills, diagrams. references. index. "Materials Research Society Symposia Proceedings". -good. 1195g.

paperback. Condición: Good. Light notes throughout. The pages are lightly tanned. The copy shows minor external wear, but is in otherwise clean condition.

EISHERZ UND EDELJASPIS oder die Geschichte einer glücklichen Gattenwahl Ein Roman aus der Ming-Zeit Leipzig, Im Insel Verlag 1926 343 SS. - mit eigenhändiger Unterschrift signiert als Besitzvermerk aus der Bibliothek von C.H. Sasse.

4. Aufl. Oln. OU.

MADONNEN Ein Cyklus von A. De NoraL. Staackmann Verlag, Leipzig 1926, 139 SS., schwarzes Ln. mit Golddruck, oben Goldschnitt, Inneneinband goldgesprenkelt, schön erhalten, 2 Besitzvermerke Schwester Margarete Kruse.

Condición: As New. Unread book in perfect condition.

55 Seiten. - Schwarzer Halbleineneinband der Zeit mit maschinenschriftlichem Papierrückenschild; 8vo.(ca. 22 x 16 cm). ~~~ 1. AUFLAGE, GEBUNDENE AUSGABE; EXEMPLAR DER BIBLIOTHEK DES 'KARL SUDHOFF INSTITUT FÜR DIE GESCHICHTE DER MEDIZIN UND DER NATURWISSENSCHAFTEN' (dem ersten medizinhistorischen Institut weltweit, gegründet 1906, 1938 nach seinem Gründer benannt), die Ende 2018 teils aufgelöst- teils auf verschiedene Leipziger Institutionen verteilt wurde. - SEHR GUTES EXEMPLAR, außen mit Rückensignatur, innen mit entsprechenden Stempeln. --- VIELE WEITERE WERKE AUS O.G. SAMMLUNG, inkl. vieler Dissertationen, Kleinschriften und Sonderdrucke sowie einiger Widmungs- bzw. von Sudhoff handschriftlich annotierter Exemplare im Bestand; geschlossene Abgabe möglich. . .…

23 cm. original hardcover. 374 pp. many ills, diagrams. references. index. -(very) good. 750g.

Condición: guter Zustand. F. guter Zustand, Gebrauchs- und Alterungsspuren: ehemaliges Bibliotheksexemplar - Titel mit Stempeln und Notizen - Deckel innen mit angeklebtem Papierrest - Vorsatz mit weiterem Stempel - Seiten aber sauber und ordentlich - Einbandecken und -kanten teils gering abgenutzt "The development of new engineering materials is increasingly considered a key technology, because it has the potential of stimulating innovation in all fields of engineering. In particular, non-equilibrium processing methods, such as powder metallurgy and rapid solidification, are receiving considerable attention in the research and development community. Among the processes with the highest potential for tailoring advanced materials, mechanical alloying techniques are of special interest because they offer great flexibility in the choice of constituent materials to be combined. Invented in the 1970's as a method for producing unique dispersion-strengthened alloys for high-temperature applications, mechanical alloying has developed several side branches and stimulated the development of related processes. Since the discovery in 1983 that even amorphous alloys can be produced by mechanical alloying, a new wave of research activity concerned with the possibilities and perspectives of this process has been unleashed. This book is the result of a conference on "New Materials by Mechanical Alloying Techniques", designed to present and discuss the state-of-the-art in this fleld and to provide some "cross-fertilization" between the different research groups including materials scientists, chemists, solid state physicists and producers. The conference was held an October 3-5, 1988 in the Kloster Hotel at Calw-Hirsau in the picturesque Black Forest region of West Germany. The group of participants consisted mainly of invited speakers from eleven countries, including three overseas nations (USA, Japan, Israel). This book, which contains the contributions presented orally and in poster form, will make the results of the conference available to a larger community and serve as a future reference for the current state of development." - Mechanical Alloying: Processes and Mechanisms - Mechanical Alloying - A Perspective J. S. Benjamin, Alcoa Center - Dispersion Strengthening by Mechanical Alloying R. C. Benn and P. K. Mirchandani, Huntington - Reaction Milling of Aluminium Alloys G. Jangg, Wien - Basic Phenomena of Glass Formation by Mechanical Alloying Schultz, Erlangen - Amorphous Phase Formation by Mechanical Alloying: Thermodynamic and Kinetic Requirements R. Bormann and R. Busch, Göttingen - Amorphization of a Binary Metal-Metalloid System by Mechanical Alloying G. Veltl, B. Scholz and H.-D. Kunze, Bremen - Compositional Dependence of Glass Formation in Mechanically Alloyed Transition Metal-Transition Metal Alloys J. Eckert, L. Schultz and K. Urban, Erlangen and Jülich - Amorphization of Gd-Co Powders by Mechanical Alloying D. Girardin and M. Maurer, Pont-a-Mousson - Ball Milling Amorphization Mechanism of Ni-Zr Alloys E. Gaffet, N. Merk, and G. Martin, J. Bigot, Vitry - Amorphization of Intermetallic Phases by Mechanical Alloying / Mechancical Milling C. C. Koch, J. S. C. Jang and P. Y. Lee, Raleigh - Amorphization and Phase Transformations during Mechanical Alloying of Nickel-Zirconium F. Petzold, B. Scholz and H.-D. Kunze, Bremen - Structural Transformation and Decomposition of Binary Alloys by Grinding P. I. Loeff, H. Bakker and F. R. de Boer, Amsterdam - Processing of Mechanically Alloyed Materials - Consolidation of Powders under High Pressures - Cold Sintering E. Y. Gutmanas, Haifa - Microstructural Changes during Consolidation - A Comparison of Rapid Solidification and Mechanical Alloying Techniques D. G. Morris and M. A. Morris, Neuchatel - Recrystallization of ODS Superalloys C. P. Jongenburger and R. F. Singer, Baden - Problems Related to Processing of Ferritic ODS Superalloys G. Korb, Reutte - Mechanically Alloyed Materials and their Properties - ODS Superalloys - High Temperature Properties of Dispersion Strengthened Materials Produced by Mechanical Alloying: Current Theoretical Understanding and Some Practical Implications E. Arzt, Stuttgart - Properties of Oxide Dispersion Strengthened Alloys J. D. Whittenberger, Cleveland - Properties and Applications of Iron-Base ODS Alloys H. D. Hedrich, Stuttgart - Analysis and Modelling of the Creep-Fatigue Behaviour of Oxide Dispersion Strengthened Superalloys D. M. Elzey and E. Arzt, Stuttgart - Aluminium Alloys - Mechanical Alloying of Light Metals R. Sundaresan and F. H. Froes , Dayton - Properties and Applications of Dispersion Strengthened Aluminum Alloys V. Arnhold and K. Hummert, Radevormwald - Creep in Dispersion Strengthened Aluminium Alloys at High Temperatures - A Model Based Approach J. Roster and E. Arzt, Stuttgart - Elevated Temperature Deformation Behaviour of Mechanically Alloyed Rapidly Solidified Al-8.4%Fe-3.4%Ce Alloy L. Övecoglu and W. D. Nix, Heerlen and Stanford - Permanent Magnets - Mechanically Alloyed Nd-Fe-B Permanent Magnets L. Schultz, K. Schnitzke, and J. Wecker, Erlangen - Nonequilibrium Phases - Development of Nanocrystalline Structures by Mechanical Alloying W. Schlump and H. Crewe, Essen - Amorphous and Nano-meter Order Grained Structures of Al-Fe and Ag-Fe Alloys Formed by Mechanical Alloying P. H. Shingu, B. Huang, J. Kuyama, K. N. Ishihara and S. Nasu, Kyoto - Mechanically Alloyed Metals with Non-Equilibrium Phases A. Inoue and T. Masumoto, Sendai - Structural and Thermal Analysis of New Systems Prepared by Mechanical Alloying G. Cocco, S. Enzo. L. Schiffini and L. Battezzati, Sassari - Topical Discussion: - Applications and Future Perspective of Mechanical Alloying - Author Index - Subject Index and Allo? Index - List of Participants Seitenanzahl: 373 Seiten mit zahlreichen Bildern Format: ca. 16 x 23,5 Leinen Englisch.…

Condición: New.

Condición: gut. 1989. New Materials by Mechanical Alloying Techniques. Paper presented at the DGM (Deutsche Gesellschaft für Metallkunde) Conference, Calw-Hirsau (FRG); October, 1988. In deutscher Sprache. pages.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New.

Visitkarte (blanko, carte de visite), in Tinte mit eigenhändiger Widmung, Empfehlung, Ort, Datum, Unterschrift eigenhändig signiert "Für Herrn Adolf Leichtle signiert A. DE NORA München 9.VI.35" BEILAGE: Karteikarte mit persönlichen Daten und Laufzeit dieser Autogrammanfrage Juni 1935.

UWE TELLKAMP (1968) deutscher Arzt und Schriftsteller Großes Original-Farbportraitfoto (quer 8°), bildseitig eigenhändig signiert.

Condición: New.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

8°, Taschenbuch. 287 Seiten Namenseintrag und Besitzerstempel. Papier leicht nachgedunkelt, sonst gutes Exemplar. Sprache: Deutsch Gewicht in Gramm: 320.

8°, Orig. kartoniert. 199 und 80 Seiten in Frakturschrift mit Abbildungen Einband und papier leicht nachgedunkelt, erste und letzte zwei Blätter mit ein paar Flecken, sonst gutes Exemplar. Sprache: Deutsch Gewicht in Gramm: 300.