Chase e a (225 resultados)

Condición: very_good. Fast Free Shipping â" Very Good condition book with a firm cover and clean pages. Shows normal use and some light wear or limited notes markings. A solid, nice copy to enjoy.

Hardback. Condición: Very Good. E.A. Chase is among the early contemporary American blacksmiths to use mixed metals as well as wood, stone and plastics in his sculptural and architectural commissions. This innovation produced dramatic affects with the contrasting uses of copper, bronze, brass and stainless steel with iron. Complementary to his use of mixed metals, another innovation and the subject of this book, is his use of the handheld pneumatic hammer. Chase began using the pneumatic hammer during the early 1970s for the conventional tasks of riveting and light cutting operations. As he became more familiar with the characteristics of the tool he realized that its unique features could be advantageous in other applications, particularly to reduce the tedium of tasks requiring repetitive blows such as texturing and peening and later to its more ambitious use to construct large scale raised metal work. He noted. New techniques inevitably produce not only different results; their influence will also be apparent in how the work is conceived and rendered. The process in getting your envisioned form can be quite different from the traditional hand process. The pneumatic hammer does not mimic the hand hammer; it has its own personality and makes its own accommodations and demands on the smith. So he began a decades long project to document the use of pneumatic hammers and to share this knowledge with the community of smiths. Learn to use the smaller handheld pneumatic hammers on hot iron days for cold center punching and line tracing for layout, hot carving and incising, slitting, cutting, peening, and riveting. On cold working days these pneumatic hammers are used for forming everything from delicate floral details to large-scale objects in non-ferrous sheet metals. The heavier and more powerful handheld hammers are used almost entirely for hot work such as punching, drifting, cutting and upsetting where the stationary power hammer is inappropriate or where a hand hammer would be a less efficient choice. All of these tools are supported by an array of specialty forged hammer bits that have evolved on an as needed basis. Learn from Chase who for over 40 years has devoted all of his creative energy to metalsmithing. This is a must have for all smiths - blacksmiths, metalsmiths, whitesmiths, coppersmiths, tinsmiths - to help create small scale hand projects or large sculptural and architectural commissions.…

Hardcover. Condición: Very Good. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

Condición: good. This book is in good condition with very minimal damage. Integrity of the book is in good condition with no missing pages. Pages can have minimal notes or highlighting. Cover image on the book may vary. Ships out quickly in a secure plastic mailer.

Hardcover. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Hardback. Condición: Very Good. E.A. Chase is among the early contemporary American blacksmiths to use mixed metals as well as wood, stone and plastics in his sculptural and architectural commissions. This innovation produced dramatic affects with the contrasting uses of copper, bronze, brass and stainless steel with iron. Complementary to his use of mixed metals, another innovation and the subject of this book, is his use of the handheld pneumatic hammer. Chase began using the pneumatic hammer during the early 1970s for the conventional tasks of riveting and light cutting operations. As he became more familiar with the characteristics of the tool he realized that its unique features could be advantageous in other applications, particularly to reduce the tedium of tasks requiring repetitive blows such as texturing and peening and later to its more ambitious use to construct large scale raised metal work. He noted. New techniques inevitably produce not only different results; their influence will also be apparent in how the work is conceived and rendered. The process in getting your envisioned form can be quite different from the traditional hand process. The pneumatic hammer does not mimic the hand hammer; it has its own personality and makes its own accommodations and demands on the smith. So he began a decades long project to document the use of pneumatic hammers and to share this knowledge with the community of smiths. Learn to use the smaller handheld pneumatic hammers on hot iron days for cold center punching and line tracing for layout, hot carving and incising, slitting, cutting, peening, and riveting. On cold working days these pneumatic hammers are used for forming everything from delicate floral details to large-scale objects in non-ferrous sheet metals. The heavier and more powerful handheld hammers are used almost entirely for hot work such as punching, drifting, cutting and upsetting where the stationary power hammer is inappropriate or where a hand hammer would be a less efficient choice. All of these tools are supported by an array of specialty forged hammer bits that have evolved on an as needed basis. Learn from Chase who for over 40 years has devoted all of his creative energy to metalsmithing. This is a must have for all smiths - blacksmiths, metalsmiths, whitesmiths, coppersmiths, tinsmiths - to help create small scale hand projects or large sculptural and architectural commissions.…

paperback. Condición: Good. 8th Edition. Corners are slightly bent. Used - Good.

hardcover. Condición: Very Good. Connecting readers with great books since 1972! Used books may not include companion materials, and may have some shelf wear or limited writing. We ship orders daily and Customer Service is our top priority.

Paperback. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

hardcover. Condición: Very Good. Grade 3 out 5 points. Book has wear on cover and pages. May have personalized notes/names, stickers/labels. Has no markings on pages. May not include extra materials like access codes, CDs, accessories, etc. All orders ship by next business day! We are a small company and very thankful for your business.…

Condición: New.

Condición: acceptable. Book is considered to be in acceptable condition. The actual cover image may not match the stock photo. Book may have one or more of the following defects: noticeable wear on the cover dust jacket or spine; curved, dog eared or creased page s ; writing or highlighting inside or on the edges; sticker s or other adhesive on cover; CD DVD may not be included; and book may be a former library copy.…

Condición: very_good. Fast & Free Shipping â" Very Good condition book with a firm cover and clean pages. Shows normal use and some light wear or limited notes markings. A solid, nice copy to enjoy.

hardcover. Condición: Fine. Connecting readers with great books since 1972! May contain remainder marks. We ship orders daily and Customer Service is our top priority.

Paperback. Condición: As New. No Jacket. Pages are clean and are not marred by notes or folds of any kind. ~ ThriftBooks: Read More, Spend Less.

Condición: good. The item shows wear from consistent use, but it remains in good condition and works perfectly. All pages and cover are intact including the dust cover, if applicable . Spine may show signs of wear. Pages may include limited notes and highlighting. May NOT include discs, access code or other supplemental materials.…

Condición: New.

paperback. Condición: Good. 2nd Edition. Corners are slightly bent. Used - Good.

Condición: As New. Unread book in perfect condition.

Condición: As New. Unread book in perfect condition.

paperback. Condición: Very Good. Connecting readers with great books since 1972! Used books may not include companion materials, and may have some shelf wear or limited writing. We ship orders daily and Customer Service is our top priority.

Condición: New.

Soft cover. Condición: Very Good. First Edition. Very good in original wrappers wtih chips on the right edge.

Hardcover. Condición: New. New oversized hardcover in glossy case wraps. Pages are clean and free of marks or underlining. 4to. (9.18 x 0.55 x 12.18 inches) Includes an index, photos, and sketches. 160 pp. Fast shipping in a secure book box mailer with tracking. E.A. Chase is among the early contemporary American blacksmiths to use mixed metals as well as wood, stone and plastics in his sculptural and architectural commissions. This innovation produced dramatic affects with the contrasting uses of copper, bronze, brass and stainless steel with iron. Complementary to his use of mixed metals, another innovation and the subject of this book, is his use of the handheld pneumatic hammer. Chase began using the pneumatic hammer during the early 1970s for the conventional tasks of riveting and light cutting operations. As he became more familiar with the characteristics of the tool he realized that its unique features could be advantageous in other applications, particularly to reduce the tedium of tasks requiring repetitive blows such as texturing and peening and later to its more ambitious use to construct large scale raised metal work. He noted. New techniques inevitably produce not only different results; their influence will also be apparent in how the work is conceived and rendered. The process in getting your envisioned form can be quite different from the traditional hand process. The pneumatic hammer does not mimic the hand hammer; it has its own "personality" and makes its own accommodations and demands on the smith. So he began a decades long project to document the use of pneumatic hammers and to share this knowledge with the community of smiths. Learn to use the smaller handheld pneumatic hammers on "hot iron" days for cold center punching and line tracing for layout, hot carving and incising, slitting, cutting, peening, and riveting. On "cold working" days these pneumatic hammers are used for forming everything from delicate floral details to large-scale objects in non-ferrous sheet metals. The heavier and more powerful handheld hammers are used almost entirely for hot work such as punching, drifting, cutting and upsetting where the stationary power hammer is inappropriate or where a hand hammer would be a less efficient choice. All of these tools are supported by an array of specialty forged hammer bits that have evolved on an "as needed" basis. Learn from Chase who for over 40 years has devoted all of his creative energy to metalsmithing. This is a must have for all smiths - blacksmiths, metalsmiths, whitesmiths, coppersmiths, tinsmiths - to help create small scale hand projects or large sculptural and architectural commissions.…

Hardcover. Condición: Good. Meets or exceeds the good condition guidelines. Nice copy. Has a small amount of writing/highlighting. Five star seller - Buy with confidence.

paperback. Condición: Very Good. Ships Out Tomorrow.

Condición: New.

No Binding. Condición: Very Good. ORIGINAL Paper from the Canadian Well Logging Society Symposium; ex-corporate library; in very good condition. Journal.

No Binding. Condición: Very Good. Large folded sheet including a large map, discussion of data sources, and references cited ; light creasing of lower corner of sheet, o/w in very good condition. Map.

No Binding. Condición: Very Good. Large folded sheet including a large map, discussion of data sources, and references cited ; in very good condition. Map.