Artículos relacionados a Manual on Experimental Methods for Mechanical Testing...
Sinopsis
References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., "Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material," Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., "Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations," Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., "Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires," J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., "Radial Tire Cord-Rubber Composite," Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., "Developments in the Design and Use of Liquid-Metal Strain Gages," EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., "The Measurement of Volume Changes in Human Limbs, " J. Physiology, 121, 1-27 (1953).
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., "Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material," Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., "Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations," Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., "Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires," J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., "Radial Tire Cord-Rubber Composite," Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., "Developments in the Design and Use of Liquid-Metal Strain Gages," EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., "The Measurement of Volume Changes in Human Limbs, " J. Physiology, 121, 1-27 (1953).
"Sobre este título" puede pertenecer a otra edición de este libro.
Comprar nuevo
Ver este artículo
EUR 53,49
EUR 11,00 gastos de envío desde Alemania a España
Destinos, gastos y plazos de envíoOtras ediciones populares con el mismo título
Resultados de la búsqueda para Manual on Experimental Methods for Mechanical Testing...
Imagen del vendedor
Manual on Experimental Methods for Mechanical Testing of Composites
Publicado por
Springer Netherlands Okt 2011, 2011
ISBN 10: 9401070008
ISBN 13: 9789401070003
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953). 180 pp. Englisch. Nº de ref. del artículo: 9789401070003
Cantidad disponible: 2 disponibles
Imagen de archivo
Manual on Experimental Methods for Mechanical Testing of Composites
Librería: Ria Christie Collections, Uxbridge, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. In. Nº de ref. del artículo: ria9789401070003_new
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Manual on Experimental Methods for Mechanical Testing of Composites
Publicado por
Springer Netherlands, 2011
ISBN 10: 9401070008
ISBN 13: 9789401070003
Nuevo
Tapa blanda
Librería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., Numerical Analysis of the Reinforcement Effect of a . Nº de ref. del artículo: 5833610
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Manual on Experimental Methods for Mechanical Testing of Composites
Publicado por
Springer Netherlands, 2011
ISBN 10: 9401070008
ISBN 13: 9789401070003
Nuevo
Taschenbuch
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953). Nº de ref. del artículo: 9789401070003
Cantidad disponible: 1 disponibles
Imagen de archivo
Manual on Experimental Methods for Mechanical Testing of Composites
Librería: Books Puddle, New York, NY, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Condición: New. pp. 180. Nº de ref. del artículo: 26142324867
Cantidad disponible: 4 disponibles
Imagen del vendedor
Manual on Experimental Methods for Mechanical Testing of Composites
Publicado por
Springer Netherlands, Springer Netherlands Okt 2011, 2011
ISBN 10: 9401070008
ISBN 13: 9789401070003
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953).Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 180 pp. Englisch. Nº de ref. del artículo: 9789401070003
Cantidad disponible: 1 disponibles
Imagen de archivo
Manual on Experimental Methods for Mechanical Testing of Composites
Impresión bajo demandaLibrería: Majestic Books, Hounslow, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Print on Demand pp. 180 6:B&W 8.25 x 11 in or 280 x 210 mm Perfect Bound on White w/Gloss Lam. Nº de ref. del artículo: 135007068
Cantidad disponible: 4 disponibles
Imagen de archivo
Manual on Experimental Methods for Mechanical Testing of Composites
Librería: Revaluation Books, Exeter, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Brand New. 180 pages. 10.99x8.26x0.43 inches. In Stock. Nº de ref. del artículo: x-9401070008
Cantidad disponible: 2 disponibles
Imagen de archivo
Manual on Experimental Methods for Mechanical Testing of Composites
Impresión bajo demandaLibrería: Biblios, Frankfurt am main, HESSE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. PRINT ON DEMAND pp. 180. Nº de ref. del artículo: 18142324873
Cantidad disponible: 4 disponibles
Imagen de archivo
Manual on Experimental Methods for Mechanical Testing of Composites
Librería: Lucky's Textbooks, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Nº de ref. del artículo: ABLIING23Apr0412070056711
Cantidad disponible: Más de 20 disponibles