Mathematical Modeling for Flow and Transport Through Porous Media - Tapa blanda

 
9789048141272: Mathematical Modeling for Flow and Transport Through Porous Media
Tapa blanda
ISBN 10: 9048141273 ISBN 13: 9789048141272
Editorial: Springer, 2013

Sinopsis

The main aim of this paper is to present some new and general results, ap­ plicable to the the equations of two phase flow, as formulated in geothermal reservoir engineering. Two phase regions are important in many geothermal reservoirs, especially at depths of order several hundred metres, where ris­ ing, essentially isothermal single phase liquid first begins to boil. The fluid then continues to rise, with its temperature and pressure closely following the saturation (boiling) curve appropriate to the fluid composition. Perhaps the two most interesting theoretical aspects of the (idealised) two phase flow equations in geothermal reservoir engineering are that firstly, only one component (water) is involved; and secondly, that the densities of the two phases are so different. This has led to the approximation of ignoring capillary pressure. The main aim of this paper is to analyse some of the consequences of this assumption, especially in relation to saturation changes within a uniform porous medium. A general analytic treatment of three dimensional flow is considered. Pre­ viously, three dimensional modelling in geothermal reservoirs have relied on numerical simulators. In contrast, most of the past analytic work has been restricted to one dimensional examples.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

The main aim of this paper is to present some new and general results, ap­ plicable to the the equations of two phase flow, as formulated in geothermal reservoir engineering. Two phase regions are important in many geothermal reservoirs, especially at depths of order several hundred metres, where ris­ ing, essentially isothermal single phase liquid first begins to boil. The fluid then continues to rise, with its temperature and pressure closely following the saturation (boiling) curve appropriate to the fluid composition. Perhaps the two most interesting theoretical aspects of the (idealised) two phase flow equations in geothermal reservoir engineering are that firstly, only one component (water) is involved; and secondly, that the densities of the two phases are so different. This has led to the approximation of ignoring capillary pressure. The main aim of this paper is to analyse some of the consequences of this assumption, especially in relation to saturation changes within a uniform porous medium. A general analytic treatment of three dimensional flow is considered. Pre­ viously, three dimensional modelling in geothermal reservoirs have relied on numerical simulators. In contrast, most of the past analytic work has been restricted to one dimensional examples.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Springer
Año de publicación
2013
Idioma
Inglés
ISBN 10 
9048141273
ISBN 13 
9789048141272
Encuadernación
Tapa blanda
Número de páginas
304
Editor
Dagan Gedeon
Contacto del fabricante
Springer Nature Customer Service Center GmbH
ProductSafety@springernature.com

Europaplatz 3
Heidelberg
69115
Alemania

Otras ediciones populares con el mismo título

9780792316169: Mathematical Modeling for Flow and Transport Through Porous Media

Edición Destacada

ISBN 10:  0792316169 ISBN 13:  9780792316169
Editorial: Springer, 1992
Tapa dura