Artículos relacionados a Design and Analysis of the Hub for a 1 kW Small Wind...
Sinopsis
In this book work is to carried out on mechanical design and analysis of the hub for a 1kW Small Wind Turbine System. The rotating blades extract the kinetic energy available in the free air stream, convert it into useful shaft power and transfer it to the generator. In the present Small Wind Turbine system, the blades are directly coupled to the generator casing. The hub acts as the interface between the rotor blades of a wind turbine system (WTS) and the rotating outer casing of the generator. It is therefore a very critical component of the WTS as it transfers the severe aerodynamic, gravitational and inertial loads acting on the rotor system. A detailed design of the hub has been carried out. The design loads have been quantified based on guidelines of IEC 61400-2. Conceptual design has been carried out and a casting model using AUTOCAD INVENTOR modelling software. Detailed designs for the respective hubs have been carried out. FEM analysis of both the proposed hub models have been done using Finite Element modelling tool HYPERMESH and NASTRAN solver.
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
In this book work is to carried out on mechanical design and analysis of the hub for a 1kW Small Wind Turbine System. The rotating blades extract the kinetic energy available in the free air stream, convert it into useful shaft power and transfer it to the generator. In the present Small Wind Turbine system, the blades are directly coupled to the generator casing. The hub acts as the interface between the rotor blades of a wind turbine system (WTS) and the rotating outer casing of the generator. It is therefore a very critical component of the WTS as it transfers the severe aerodynamic, gravitational and inertial loads acting on the rotor system. A detailed design of the hub has been carried out. The design loads have been quantified based on guidelines of IEC 61400-2. Conceptual design has been carried out and a casting model using AUTOCAD INVENTOR modelling software. Detailed designs for the respective hubs have been carried out. FEM analysis of both the proposed hub models have been done using Finite Element modelling tool HYPERMESH and NASTRAN solver.
"Sobre este título" puede pertenecer a otra edición de este libro.
Resultados de la búsqueda para Design and Analysis of the Hub for a 1 kW Small Wind...
Imagen del vendedor
Design and Analysis of the Hub for a 1 kW Small Wind Turbine System
Publicado por
LAP LAMBERT Academic Publishing Jul 2018, 2018
ISBN 10: 6139877059
ISBN 13: 9786139877058
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this book work is to carried out on mechanical design and analysis of the hub for a 1kW Small Wind Turbine System. The rotating blades extract the kinetic energy available in the free air stream, convert it into useful shaft power and transfer it to the generator. In the present Small Wind Turbine system, the blades are directly coupled to the generator casing. The hub acts as the interface between the rotor blades of a wind turbine system (WTS) and the rotating outer casing of the generator. It is therefore a very critical component of the WTS as it transfers the severe aerodynamic, gravitational and inertial loads acting on the rotor system. A detailed design of the hub has been carried out. The design loads have been quantified based on guidelines of IEC 61400-2. Conceptual design has been carried out and a casting model using AUTOCAD INVENTOR modelling software. Detailed designs for the respective hubs have been carried out. FEM analysis of both the proposed hub models have been done using Finite Element modelling tool HYPERMESH and NASTRAN solver. 60 pp. Englisch. Nº de ref. del artículo: 9786139877058
Comprar nuevo
EUR 39,90
Envío por EUR 23,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 2 disponibles
Imagen del vendedor
Design and Analysis of the Hub for a 1 kW Small Wind Turbine System
Publicado por
LAP LAMBERT Academic Publishing, 2018
ISBN 10: 6139877059
ISBN 13: 9786139877058
Nuevo
Tapa blanda
Librería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Kalai DeepakMr. Deepak Kalai completed his post graduation in Machine Design Engineering from VTU Belagavi. He is currently working as a Assistant Professor in DKTE Society s Textile and Engineering Institute, Ichalkaranji. He is exp. Nº de ref. del artículo: 385875429
Comprar nuevo
EUR 34,25
Envío por EUR 48,99
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: Más de 20 disponibles
Imagen de archivo
Design and Analysis of the Hub for a 1 kW Small Wind Turbine System
Publicado por
LAP LAMBERT Academic Publishing, 2018
ISBN 10: 6139877059
ISBN 13: 9786139877058
Nuevo
Paperback
Librería: Revaluation Books, Exeter, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Brand New. 60 pages. 8.66x5.91x0.14 inches. In Stock. Nº de ref. del artículo: zk6139877059
Comprar nuevo
EUR 72,45
Envío por EUR 11,69
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen del vendedor
Design and Analysis of the Hub for a 1 kW Small Wind Turbine System
Publicado por
LAP LAMBERT Academic Publishing Jul 2018, 2018
ISBN 10: 6139877059
ISBN 13: 9786139877058
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this book work is to carried out on mechanical design and analysis of the hub for a 1kW Small Wind Turbine System. The rotating blades extract the kinetic energy available in the free air stream, convert it into useful shaft power and transfer it to the generator. In the present Small Wind Turbine system, the blades are directly coupled to the generator casing. The hub acts as the interface between the rotor blades of a wind turbine system (WTS) and the rotating outer casing of the generator. It is therefore a very critical component of the WTS as it transfers the severe aerodynamic, gravitational and inertial loads acting on the rotor system. A detailed design of the hub has been carried out. The design loads have been quantified based on guidelines of IEC 61400-2. Conceptual design has been carried out and a casting model using AUTOCAD INVENTOR modelling software. Detailed designs for the respective hubs have been carried out. FEM analysis of both the proposed hub models have been done using Finite Element modelling tool HYPERMESH and NASTRAN solver.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 60 pp. Englisch. Nº de ref. del artículo: 9786139877058
Comprar nuevo
EUR 39,90
Envío por EUR 60,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen del vendedor
Design and Analysis of the Hub for a 1 kW Small Wind Turbine System
Publicado por
LAP LAMBERT Academic Publishing, 2018
ISBN 10: 6139877059
ISBN 13: 9786139877058
Nuevo
Taschenbuch
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this book work is to carried out on mechanical design and analysis of the hub for a 1kW Small Wind Turbine System. The rotating blades extract the kinetic energy available in the free air stream, convert it into useful shaft power and transfer it to the generator. In the present Small Wind Turbine system, the blades are directly coupled to the generator casing. The hub acts as the interface between the rotor blades of a wind turbine system (WTS) and the rotating outer casing of the generator. It is therefore a very critical component of the WTS as it transfers the severe aerodynamic, gravitational and inertial loads acting on the rotor system. A detailed design of the hub has been carried out. The design loads have been quantified based on guidelines of IEC 61400-2. Conceptual design has been carried out and a casting model using AUTOCAD INVENTOR modelling software. Detailed designs for the respective hubs have been carried out. FEM analysis of both the proposed hub models have been done using Finite Element modelling tool HYPERMESH and NASTRAN solver. Nº de ref. del artículo: 9786139877058
Comprar nuevo
EUR 40,89
Envío por EUR 60,54
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles