Artículos relacionados a Nanotechnology and Powder processing for Ceramic Microfabric...

Nanotechnology and Powder processing for Ceramic Microfabrication: Nanotechnology based processes for the fabrication of high precision ceramic microcomponents - Tapa blanda

Hassanin, Hany

 
9783848425983: Nanotechnology and Powder processing for Ceramic Microfabrication: Nanotechnology based processes for the fabrication of high precision ceramic microcomponents
Tapa blanda
ISBN 10: 384842598X ISBN 13: 9783848425983
Editorial: LAP LAMBERT Academic Publishing, 2012

Sinopsis

This book is set out to introduce a high precision ceramic fabrication approach suitable for mass production. A group of new processes have been developed and the results are characterized for fabrication of high precision ceramic oxides and composite microcomponents using soft lithography and colloidal powder processing. The book can be divided into four main sections. In the first section fabrication processes high precision hard and soft moulds were studied. In the second section, water, solvent and paraffin wax slurry systems were tested to fill PDMS soft moulds. A comparison study was carried out to choose the best slurry system based on their outputs. In the third section, different ceramic powder sizes of both alumina and zirconia were used in experiments. The work includes detailed characterisation of slurries, green and sintered microcomponents. In the fourth section, the proposed techniques were extended to fabricated homogenous and gradient profiles zirconia/alumina composite microcomponents with tailored properties.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

This book is set out to introduce a high precision ceramic fabrication approach suitable for mass production. A group of new processes have been developed and the results are characterized for fabrication of high precision ceramic oxides and composite microcomponents using soft lithography and colloidal powder processing. The book can be divided into four main sections. In the first section fabrication processes high precision hard and soft moulds were studied. In the second section, water, solvent and paraffin wax slurry systems were tested to fill PDMS soft moulds. A comparison study was carried out to choose the best slurry system based on their outputs. In the third section, different ceramic powder sizes of both alumina and zirconia were used in experiments. The work includes detailed characterisation of slurries, green and sintered microcomponents. In the fourth section, the proposed techniques were extended to fabricated homogenous and gradient profiles zirconia/alumina composite microcomponents with tailored properties.

Biografía del autor

Hany is a lecturer at Helwan University, Egypt and a Research Fellow within the Micro-engineering and Nano-technology Research Centre since 2010, University of Birmingham. He has a BS.c (Eng.) mechanical engineering, Cairo University, Egypt, 1999. MS.c in mechanical dynamics, Helwan University, Egypt, 2005. PhD at University of Birmingham, UK, 2010

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
LAP LAMBERT Academic Publishing
Año de publicación
2012
Idioma
Inglés
ISBN 10 
384842598X
ISBN 13 
9783848425983
Encuadernación
Tapa blanda
Número de páginas
228
Contacto del fabricante
no disponible
Persona responsable
no disponible