Artículos relacionados a Pick and Place Robotic Arm Using Micro Controller:...
Pick and Place Robotic Arm Using Micro Controller: Fabrication Process, Electronic Circuits and Programming - Tapa blanda
Reseña del editor
In this, Development of Servo Motor Pick and Place Robot with Microcontroller project is being proposed. A robot will be build that would function as a tool to pick and place object. A small robot arm assembly simulating shoulder movement of a human arm to be built to pick and place object from point A to B. The arm has three degree of freedom so the hand is able to reach and pick object from any three dimensional point. Electric motors will be used as the actuator for the robot that is controlled by microcontroller. The project encompasses all design areas required to make a hand able to move and pick an object, including hardware design, analysis, and electronic controller circuit designs and controller programs.
Biografía del autor
Engineer Sami Saeed,currently doing Masters in Mechanical Design and Analysis from Institute Of Space Technology, Islamabad, Pakistan. Did his bachelor from University Of Engineering And Technology, Taxila, Pakistan.
"Sobre este título" puede pertenecer a otra edición de este libro.
- EditorialLAP LAMBERT Academic Publishing
- Año de publicación2016
- ISBN 10 3659905437
- ISBN 13 9783659905438
- EncuadernaciónTapa blanda
- IdiomaInglés
- Número de páginas76
Comprar nuevo
Ver este artículo
EUR 35,90
EUR 23,00 gastos de envío desde Alemania a Estados Unidos de America
Destinos, gastos y plazos de envíoResultados de la búsqueda para Pick and Place Robotic Arm Using Micro Controller:...
Imagen del vendedor
Pick and Place Robotic Arm Using Micro Controller
Publicado por
LAP LAMBERT Academic Publishing Jun 2016, 2016
ISBN 10: 3659905437
ISBN 13: 9783659905438
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this, Development of Servo Motor Pick and Place Robot with Microcontroller project is being proposed. A robot will be build that would function as a tool to pick and place object. A small robot arm assembly simulating shoulder movement of a human arm to be built to pick and place object from point A to B. The arm has three degree of freedom so the hand is able to reach and pick object from any three dimensional point. Electric motors will be used as the actuator for the robot that is controlled by microcontroller. The project encompasses all design areas required to make a hand able to move and pick an object, including hardware design, analysis, and electronic controller circuit designs and controller programs. 76 pp. Englisch. Nº de ref. del artículo: 9783659905438
Gastos de envío:
EUR 23,00
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 2 disponibles
Imagen del vendedor
Pick and Place Robotic Arm Using Micro Controller : Fabrication Process, Electronic Circuits and Programming
Publicado por
LAP LAMBERT Academic Publishing, 2016
ISBN 10: 3659905437
ISBN 13: 9783659905438
Nuevo
Taschenbuch
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this, Development of Servo Motor Pick and Place Robot with Microcontroller project is being proposed. A robot will be build that would function as a tool to pick and place object. A small robot arm assembly simulating shoulder movement of a human arm to be built to pick and place object from point A to B. The arm has three degree of freedom so the hand is able to reach and pick object from any three dimensional point. Electric motors will be used as the actuator for the robot that is controlled by microcontroller. The project encompasses all design areas required to make a hand able to move and pick an object, including hardware design, analysis, and electronic controller circuit designs and controller programs. Nº de ref. del artículo: 9783659905438
Gastos de envío:
EUR 28,65
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles
Imagen del vendedor
Pick and Place Robotic Arm Using Micro Controller
Publicado por
LAP LAMBERT Academic Publishing, 2016
ISBN 10: 3659905437
ISBN 13: 9783659905438
Nuevo
Tapa blanda
Librería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Saeed SamiEngineer Sami Saeed,currently doing Masters in Mechanical Design and Analysis from Institute Of Space Technology, Islamabad, Pakistan. Did his bachelor from University Of Engineering And Technology, Taxila, Pakistan.In . Nº de ref. del artículo: 158430534
Gastos de envío:
EUR 48,99
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: Más de 20 disponibles
Imagen de archivo
Pick and Place Robotic Arm Using Micro Controller: Fabrication Process, Electronic Circuits and Programming
Publicado por
LAP LAMBERT Academic Publishing, 2016
ISBN 10: 3659905437
ISBN 13: 9783659905438
Nuevo
Paperback
Librería: Revaluation Books, Exeter, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Brand New. 76 pages. 8.66x5.91x0.18 inches. In Stock. Nº de ref. del artículo: 3659905437
Gastos de envío:
EUR 11,76
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles