Artículos relacionados a Digital Control Systems: Volume 2: Stochastic Control,...
Digital Control Systems: Volume 2: Stochastic Control, Multivariable Control, Adaptive Control, Applications - Tapa blanda
Sinopsis
The two volumes of this completely revised and expanded second edition form a unit with volume 2 concentrating on stochastic control, treatment on interconnected control systems, multivariable control and adaptive digital control systems. The book is directed both towards students of electrical and mechanical engineering, computer science as well as biology, economics, mathematics, physics and towards engineers and scientists working in the field.
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
The great advances made in large-scale integration of semiconductors and the resulting cost-effective digital processors and data storage devices determine the present development of automation. The application of digital techniques to process automation started in about 1960, when the first process computer was installed. From about 1970 process computers with cathodic ray tube display have become standard equipment for larger automation systems. Until about 1980 the annual increase of process computers was about 20 to 30%. The cost of hardware has already then shown a tendency to decrease, whereas the relative cost of user software has tended to increase. Because of the high total cost the first phase of digital process automation is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Application was mainly restricted to medium and large processes. Because of the far-reaching consequences of a breakdown in the central computer parallel standby computers or parallel back-up systems had to be provided. This meant a substantial increase in cost. The tendency to overload the capacity and software problems caused further difficulties. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output modules, can be assem bled into cost-effective microcomputers. These microcomputers differ from process computers in fewer but higher integrated modules and in the adaptability of their hardware and software to specialized, less comprehensive tasks.
Reseña del editor
This well-known book which appears in two volumes is an introduction to the field of digital, sampled-data control. The second edition has been completely revised and expanded with new results. The two volumes form a unit. They take the reader systematically from fundamentals to problems of real applications with volume 2 concentrating on stochastic control, treatment of interconnected control systems, multivariable control and adaptive digital control systems. The final part deals with practical considerations including examples of computer-aided adaptive and self-tuning controllers for various technical processes. The work is directed towards students of electrical and mechanical engineering, computer science and other fields like biology, economics, mathematics and physics. It is also directed to engineers and scientists concerned with solving concrete problems.
"Sobre este título" puede pertenecer a otra edición de este libro.
Comprar nuevo
Ver este artículo
EUR 72,89
EUR 19,49 gastos de envío desde Alemania a España
Destinos, gastos y plazos de envíoOtras ediciones populares con el mismo título
Resultados de la búsqueda para Digital Control Systems: Volume 2: Stochastic Control,...
Imagen del vendedor
Digital Control Systems
Publicado por
Springer Berlin Heidelberg, 2012
ISBN 10: 3642864228
ISBN 13: 9783642864223
Nuevo
Tapa blanda
Librería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. The great advances made in large-scale integration of semiconductors and the resulting cost-effective digital processors and data storage devices determine the present development of automation. The application of digital techniques to process automation st. Nº de ref. del artículo: 5072570
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Digital Control Systems
Publicado por
Springer Berlin Heidelberg Nov 2012, 2012
ISBN 10: 3642864228
ISBN 13: 9783642864223
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The great advances made in large-scale integration of semiconductors and the resulting cost-effective digital processors and data storage devices determine the present development of automation. The application of digital techniques to process automation started in about 1960, when the first process computer was installed. From about 1970 process computers with cathodic ray tube display have become standard equipment for larger automation systems. Until about 1980 the annual increase of process computers was about 20 to 30%. The cost of hardware has already then shown a tendency to decrease, whereas the relative cost of user software has tended to increase. Because of the high total cost the first phase of digital process automation is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Application was mainly restricted to medium and large processes. Because of the far-reaching consequences of a breakdown in the central computer parallel standby computers or parallel back-up systems had to be provided. This meant a substantial increase in cost. The tendency to overload the capacity and software problems caused further difficulties. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output modules, can be assem bled into cost-effective microcomputers. These microcomputers differ from process computers in fewer but higher integrated modules and in the adaptability of their hardware and software to specialized, less comprehensive tasks. 352 pp. Englisch. Nº de ref. del artículo: 9783642864223
Cantidad disponible: 2 disponibles
Imagen de archivo
Digital Control Systems: Volume 2: Stochastic Control, Multivariable Control, Adaptive Control, Applications
Librería: Ria Christie Collections, Uxbridge, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. In. Nº de ref. del artículo: ria9783642864223_new
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Digital Control Systems : Volume 2: Stochastic Control, Multivariable Control, Adaptive Control, Applications
Publicado por
Springer Berlin Heidelberg, 2012
ISBN 10: 3642864228
ISBN 13: 9783642864223
Nuevo
Taschenbuch
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The great advances made in large-scale integration of semiconductors and the resulting cost-effective digital processors and data storage devices determine the present development of automation. The application of digital techniques to process automation started in about 1960, when the first process computer was installed. From about 1970 process computers with cathodic ray tube display have become standard equipment for larger automation systems. Until about 1980 the annual increase of process computers was about 20 to 30%. The cost of hardware has already then shown a tendency to decrease, whereas the relative cost of user software has tended to increase. Because of the high total cost the first phase of digital process automation is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Application was mainly restricted to medium and large processes. Because of the far-reaching consequences of a breakdown in the central computer parallel standby computers or parallel back-up systems had to be provided. This meant a substantial increase in cost. The tendency to overload the capacity and software problems caused further difficulties. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output modules, can be assem bled into cost-effective microcomputers. These microcomputers differ from process computers in fewer but higher integrated modules and in the adaptability of their hardware and software to specialized, less comprehensive tasks. Nº de ref. del artículo: 9783642864223
Cantidad disponible: 1 disponibles
Imagen de archivo
Digital Control Systems : Volume 2: Stochastic Control, Multivariable Control, Adaptive Control, Applications
Librería: Chiron Media, Wallingford, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
PF. Condición: New. Nº de ref. del artículo: 6666-IUK-9783642864223
Cantidad disponible: 10 disponibles
Imagen de archivo
Digital Control Systems: Volume 2: Stochastic Control, Multivariable Control, Adaptive Control, Applications
Librería: California Books, Miami, FL, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Nº de ref. del artículo: I-9783642864223
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Digital Control Systems
Publicado por
Springer Berlin Heidelberg, Springer Berlin Heidelberg Nov 2012, 2012
ISBN 10: 3642864228
ISBN 13: 9783642864223
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. Neuware -The great advances made in large-scale integration of semiconductors and the resulting cost-effective digital processors and data storage devices determine the present development of automation. The application of digital techniques to process automation started in about 1960, when the first process computer was installed. From about 1970 process computers with cathodic ray tube display have become standard equipment for larger automation systems. Until about 1980 the annual increase of process computers was about 20 to 30%. The cost of hardware has already then shown a tendency to decrease, whereas the relative cost of user software has tended to increase. Because of the high total cost the first phase of digital process automation is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Application was mainly restricted to medium and large processes. Because of the far-reaching consequences of a breakdown in the central computer parallel standby computers or parallel back-up systems had to be provided. This meant a substantial increase in cost. The tendency to overload the capacity and software problems caused further difficulties. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output modules, can be assem bled into cost-effective microcomputers. These microcomputers differ from process computers in fewer but higher integrated modules and in the adaptability of their hardware and software to specialized, less comprehensive tasks.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 352 pp. Englisch. Nº de ref. del artículo: 9783642864223
Cantidad disponible: 2 disponibles
Imagen de archivo
Digital Control Systems
Librería: Books Puddle, New York, NY, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Condición: New. pp. 352 2nd Edition, Reprint. Nº de ref. del artículo: 26142291153
Cantidad disponible: 4 disponibles
Imagen de archivo
Digital Control Systems
Impresión bajo demandaLibrería: Majestic Books, Hounslow, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Print on Demand pp. 352 120 Figures, 67:B&W 6.69 x 9.61 in or 244 x 170 mm (Pinched Crown) Perfect Bound on White w/Gloss Lam. Nº de ref. del artículo: 135040782
Cantidad disponible: 4 disponibles
Imagen de archivo
Digital Control Systems: Volume 2: Stochastic Control, Multivariable Control, Adaptive Control, Applications
Librería: Revaluation Books, Exeter, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Brand New. 2nd revised edition. 325 pages. 9.50x6.58x1.00 inches. In Stock. Nº de ref. del artículo: x-3642864228
Cantidad disponible: 2 disponibles