Cutting and packing problems such as the cutting of sheet metal and the loading of contain ers or, in a more abstract sense, capital budgeting or assembly line balancing have been treated in scientific literature of various disciplines for about fifty years. Since the pioneer work of Kantorovich in 1939, which frrst appeared in the West in 1960, there has been a steadily growing number of contributions of increasing importance in this research area, particularly in the past decade. As of today more than 700 contributions exist even when applying a strict categorisation. Since comprehensive monographies and compiled studies are still lacking, it is very time consuming and thus expensive to search for a suitable solution procedure for concrete problems in the available literature. Thus, an apparently simpler way is often chosen, which is to develop ones own approach. For this reason there is not only the danger of unnecessary effort and scientific repetition, but it is reality. With the goal of improved research coordination an interdisciplinary Special Interest Group on Cutting and Packing (SICUP) was founded in 1988, which meets every two years (1988 Paris, 1990 Athens, 1992 San Francisco) and issues a semi-annual newsletter (SICUP Bulletin) with up-to-date information. This book is intended to assist in the coordination of research work in this area.
"Sinopsis" puede pertenecer a otra edición de este libro.
Harald Dyckhoff, geb. 1951 in Rheine/Westfalen, hat Mathematik und Physik sowie Betriebswirtschaftslehre an der RWTH Aachen studiert. An der Fernuniversität Hagen promovierte er in Wirtschaftstheorie und habilitierte sich für das Fach Betriebswirtschaftslehre. Nach einer Professur an der Universität Essen wurde er 1988 auf den Lehrstuhl für Industriebetriebslehre der RWTH Aachen berufen (seit 1996 Lehrstuhl für Unternehmenstheorie). Hauptarbeitsgebiete sind Produktions- und Entscheidungstheorie, nachhaltige industrielle Wertschöpfung sowie Performance-Evaluation. Thomas Stefan Spengler, geb. 1963 in Karlsruhe, hat Wirtschaftsingenieurwesen an der Universität Karlsruhe (TH) studiert, dort promoviert und sich für das Fach Betriebswirtschaftslehre habilitiert. Seit 1998 ist er Inhaber des Lehrstuhls für Betriebswirtschaftslehre, insbesondere Produktion und Logistik und seit 2008 Leiter des Instituts für Automobilwirtschaft und Industrielle Produktion der Technischen Universität Braunschweig. Seine Forschungsgebiete liegen in der Entwicklung und Anwendung von Methoden zur Modellierung, Bewertung, Gestaltung und Optimierung von Produktions- und Logistiksystemen.
Cutting and packing problems such as the cutting of sheet metal and the loading of contain ers or, in a more abstract sense, capital budgeting or assembly line balancing have been treated in scientific literature of various disciplines for about fifty years. Since the pioneer work of Kantorovich in 1939, which frrst appeared in the West in 1960, there has been a steadily growing number of contributions of increasing importance in this research area, particularly in the past decade. As of today more than 700 contributions exist even when applying a strict categorisation. Since comprehensive monographies and compiled studies are still lacking, it is very time consuming and thus expensive to search for a suitable solution procedure for concrete problems in the available literature. Thus, an apparently simpler way is often chosen, which is to develop ones own approach. For this reason there is not only the danger of unnecessary effort and scientific repetition, but it is reality. With the goal of improved research coordination an interdisciplinary Special Interest Group on Cutting and Packing (SICUP) was founded in 1988, which meets every two years (1988 Paris, 1990 Athens, 1992 San Francisco) and issues a semi-annual newsletter (SICUP Bulletin) with up-to-date information. This book is intended to assist in the coordination of research work in this area.
"Sobre este título" puede pertenecer a otra edición de este libro.
Librería: Brook Bookstore On Demand, Napoli, NA, Italia
Condición: new. Questo è un articolo print on demand. Nº de ref. del artículo: J0H7DA61X4
Cantidad disponible: Más de 20 disponibles
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Cutting and packing problems such as the cutting of sheet metal and the loading of contain ers or, in a more abstract sense, capital budgeting or assembly line balancing have been treated in scientific literature of various disciplines for about fifty years. Since the pioneer work of Kantorovich in 1939, which frrst appeared in the West in 1960, there has been a steadily growing number of contributions of increasing importance in this research area, particularly in the past decade. As of today more than 700 contributions exist even when applying a strict categorisation. Since comprehensive monographies and compiled studies are still lacking, it is very time consuming and thus expensive to search for a suitable solution procedure for concrete problems in the available literature. Thus, an apparently simpler way is often chosen, which is to develop ones own approach. For this reason there is not only the danger of unnecessary effort and scientific repetition, but it is reality. With the goal of improved research coordination an interdisciplinary Special Interest Group on Cutting and Packing (SICUP) was founded in 1988, which meets every two years (1988 Paris, 1990 Athens, 1992 San Francisco) and issues a semi-annual newsletter (SICUP Bulletin) with up-to-date information. This book is intended to assist in the coordination of research work in this area. 264 pp. Englisch. Nº de ref. del artículo: 9783642634871
Cantidad disponible: 2 disponibles
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de America
Condición: New. Nº de ref. del artículo: 19494981-n
Cantidad disponible: 15 disponibles
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de America
Condición: As New. Unread book in perfect condition. Nº de ref. del artículo: 19494981
Cantidad disponible: 15 disponibles
Librería: Ria Christie Collections, Uxbridge, Reino Unido
Condición: New. In English. Nº de ref. del artículo: ria9783642634871_new
Cantidad disponible: Más de 20 disponibles
Librería: Books Puddle, Woodside, NY, Estados Unidos de America
Condición: New. pp. 264. Nº de ref. del artículo: 2658582803
Cantidad disponible: 4 disponibles
Librería: Majestic Books, Hounslow, Reino Unido
Condición: New. Print on Demand pp. 264 67:B&W 6.69 x 9.61 in or 244 x 170 mm (Pinched Crown) Perfect Bound on White w/Gloss Lam. Nº de ref. del artículo: 51009740
Cantidad disponible: 4 disponibles
Librería: moluna, Greven, Alemania
Condición: New. Nº de ref. del artículo: 5065788
Cantidad disponible: Más de 20 disponibles
Librería: Biblios, Frankfurt am main, HESSE, Alemania
Condición: New. PRINT ON DEMAND pp. 264. Nº de ref. del artículo: 1858582809
Cantidad disponible: 4 disponibles
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Cutting and packing problems such as the cutting of sheet metal and the loading of contain ers or, in a more abstract sense, capital budgeting or assembly line balancing have been treated in scientific literature of various disciplines for about fifty years. Since the pioneer work of Kantorovich in 1939, which frrst appeared in the West in 1960, there has been a steadily growing number of contributions of increasing importance in this research area, particularly in the past decade. As of today more than 700 contributions exist even when applying a strict categorisation. Since comprehensive monographies and compiled studies are still lacking, it is very time consuming and thus expensive to search for a suitable solution procedure for concrete problems in the available literature. Thus, an apparently simpler way is often chosen, which is to develop ones own approach. For this reason there is not only the danger of unnecessary effort and scientific repetition, but it is reality. With the goal of improved research coordination an interdisciplinary Special Interest Group on Cutting and Packing (SICUP) was founded in 1988, which meets every two years (1988 Paris, 1990 Athens, 1992 San Francisco) and issues a semi-annual newsletter (SICUP Bulletin) with up-to-date information. This book is intended to assist in the coordination of research work in this area. Nº de ref. del artículo: 9783642634871
Cantidad disponible: 1 disponibles