Artículos relacionados a Informatics in Control, Automation and Robotics: Revised...
Informatics in Control, Automation and Robotics: Revised and Selected Papers from the International Conference on Informatics in Control, Automation ... 89 (Lecture Notes in Electrical Engineering) - Tapa blanda
Sinopsis
The present book includes a set of selected papers from the seventh "International Conference on Informatics in Control Automation and Robotics"
(ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation" and "Signal Processing, Systems Modeling and Control". The book is based on the same structure.
ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010.
Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
"Sinopsis" puede pertenecer a otra edición de este libro.
De la contraportada
The present book includes a set of selected papers from the seventh "International Conference on Informatics in Control Automation and Robotics"
(ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation" and "Signal Processing, Systems Modeling and Control". The book is based on the same structure.
ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010.
Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
"Sobre este título" puede pertenecer a otra edición de este libro.
Comprar nuevo
Ver este artículo
EUR 136,16
EUR 19,49 gastos de envío desde Alemania a España
Destinos, gastos y plazos de envíoOtras ediciones populares con el mismo título
Resultados de la búsqueda para Informatics in Control, Automation and Robotics: Revised...
Imagen del vendedor
Informatics in Control, Automation and Robotics
Publicado por
Springer Berlin Heidelberg, 2013
ISBN 10: 364226784X
ISBN 13: 9783642267840
Nuevo
Tapa blanda
Librería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Recent research on Informatics in Control Automation and Robotics Revised and selected papers from the International Conference on Informatics in Control Automation and Robotics 2009 Written by leading experts in the fieldThe pre. Nº de ref. del artículo: 5054829
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Informatics in Control, Automation and Robotics
Publicado por
Springer Berlin Heidelberg Mai 2013, 2013
ISBN 10: 364226784X
ISBN 13: 9783642267840
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The present book includes a set of selected papers from the seventh 'International Conference on Informatics in Control Automation and Robotics'(ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation' and 'Signal Processing, Systems Modeling and Control'. The book is based on the same structure. ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics. 380 pp. Englisch. Nº de ref. del artículo: 9783642267840
Cantidad disponible: 2 disponibles
Imagen del vendedor
Informatics in Control, Automation and Robotics : Revised and Selected Papers from the International Conference on Informatics in Control, Automation and Robotics 2010
Publicado por
Springer Berlin Heidelberg, 2013
ISBN 10: 364226784X
ISBN 13: 9783642267840
Nuevo
Taschenbuch
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The present book includes a set of selected papers from the seventh 'International Conference on Informatics in Control Automation and Robotics'(ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation' and 'Signal Processing, Systems Modeling and Control'. The book is based on the same structure. ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics. Nº de ref. del artículo: 9783642267840
Cantidad disponible: 1 disponibles
Imagen de archivo
Informatics in Control, Automation and Robotics: Revised and Selected Papers from the International Conference on Informatics in Control, Automation ... (Lecture Notes in Electrical Engineering, 89)
Librería: Ria Christie Collections, Uxbridge, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. In. Nº de ref. del artículo: ria9783642267840_new
Cantidad disponible: Más de 20 disponibles
Imagen de archivo
Informatics in Control, Automation and Robotics
Librería: Books Puddle, New York, NY, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Condición: New. pp. 380. Nº de ref. del artículo: 2698039488
Cantidad disponible: 4 disponibles
Imagen del vendedor
Informatics in Control, Automation and Robotics
Publicado por
Springer Berlin Heidelberg, Springer Berlin Heidelberg Mai 2013, 2013
ISBN 10: 364226784X
ISBN 13: 9783642267840
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. Neuware -The present book includes a set of selected papers from the seventh 'International Conference on Informatics in Control Automation and Robotics'(ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation' and 'Signal Processing, Systems Modeling and Control'. The book is based on the same structure. ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 380 pp. Englisch. Nº de ref. del artículo: 9783642267840
Cantidad disponible: 2 disponibles
Imagen de archivo
Informatics in Control, Automation and Robotics: Revised and Selected Papers from the International Conference on Informatics in Control, Automation ... (Lecture Notes in Electrical Engineering, 89)
Librería: California Books, Miami, FL, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Nº de ref. del artículo: I-9783642267840
Cantidad disponible: Más de 20 disponibles
Imagen de archivo
Informatics in Control, Automation and Robotics
Impresión bajo demandaLibrería: Majestic Books, Hounslow, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Print on Demand pp. 380. Nº de ref. del artículo: 94390559
Cantidad disponible: 4 disponibles
Imagen de archivo
Informatics in Control, Automation and Robotics
Impresión bajo demandaLibrería: Biblios, Frankfurt am main, HESSE, Alemania
Calificación del vendedor: 4 de 5 estrellas
Condición: New. PRINT ON DEMAND pp. 380. Nº de ref. del artículo: 1898039498
Cantidad disponible: 4 disponibles
Imagen de archivo
Informatics in Control, Automation and Robotics: Revised and Selected Papers from the International Conference on Informatics in Control, Automation ... (Lecture Notes in Electrical Engineering, 89)
Librería: Lucky's Textbooks, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Nº de ref. del artículo: ABLIING23Mar3113020222662
Cantidad disponible: Más de 20 disponibles