This book contains the extended and revised versions of the talks of all speakers presented at the sixth AACD Workshop held in Villa Olmo, April 2-4 1997 Como, Italy. The local chairman was Pietro Erratico and the organization was performed by Isabella De Quattro both of SGS Thomson Microelectronics Cornareda and Agrate Brianza Italy. The program consisted of six tutorials per day during three days. These tutorials were presented by experts in the field to give state of the art information. Program topics for the following workshop are selected by the audience at the end of the workshop. The program committee, consisting of 10han Huijsing of Delft University of Technology, Willy Sansen of Katholieke Universiteit Leuven and Rudy van de Plassche of Philips Research Labs and University of Technology Eindhoven elaborates the selected topics into a three day program and selects the experts in the field for presentation. Each AACD Workshop has given rise to the publication of a book by Kluwer entitled "Analog Circuit Design". This series of six books in a row provides a valuable overview of all analog circuit techniques concerning design, CAD, simulation and device modeling and can be seen as a reference to those involved in analog circuits.
"Sinopsis" puede pertenecer a otra edición de este libro.
`The authors are to be complimented for collecting, into a single reference, a lot of interesting information related to the above mentioned topics, particularly useful for data-acquisition system designers, RF engineers, and others.'
Microelectronics Journal 29 (1998) 1039-1046
This book contains the extended and revised versions of the talks of all speakers presented at the sixth AACD Workshop held in Villa Olmo, April 2-4 1997 Como, Italy. The local chairman was Pietro Erratico and the organization was performed by Isabella De Quattro both of SGS Thomson Microelectronics Cornareda and Agrate Brianza Italy. The program consisted of six tutorials per day during three days. These tutorials were presented by experts in the field to give state of the art information. Program topics for the following workshop are selected by the audience at the end of the workshop. The program committee, consisting of 10han Huijsing of Delft University of Technology, Willy Sansen of Katholieke Universiteit Leuven and Rudy van de Plassche of Philips Research Labs and University of Technology Eindhoven elaborates the selected topics into a three day program and selects the experts in the field for presentation. Each AACD Workshop has given rise to the publication of a book by Kluwer entitled "Analog Circuit Design". This series of six books in a row provides a valuable overview of all analog circuit techniques concerning design, CAD, simulation and device modeling and can be seen as a reference to those involved in analog circuits.
"Sobre este título" puede pertenecer a otra edición de este libro.
EUR 4,53 gastos de envío en Estados Unidos de America
Destinos, gastos y plazos de envíoEUR 2,28 gastos de envío en Estados Unidos de America
Destinos, gastos y plazos de envíoLibrería: Kellogg Creek Books, Portland, OR, Estados Unidos de America
Hardcover. Condición: Fine. 1st Edition. Binding tight, content clean and straight with the exception of previous owner's name written on ffep. Appears unread. Cover in excellent, shiny condition. If purchasing internationally, inquire about shipping charges before purchase. Ships within 1-2 business days. Nº de ref. del artículo: 2647
Cantidad disponible: 1 disponibles
Librería: GreatBookPrices, Columbia, MD, Estados Unidos de America
Condición: New. Nº de ref. del artículo: 758281-n
Cantidad disponible: 15 disponibles
Librería: Lucky's Textbooks, Dallas, TX, Estados Unidos de America
Condición: New. Nº de ref. del artículo: ABLIING23Feb2416190186348
Cantidad disponible: Más de 20 disponibles
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de America
Hardcover. Condición: new. Hardcover. This volume of "Analog Circuit Design" concentrates on three topics: RF analogue-to-digital converters; sensor and actuator interfaces; and low-noise oscillators, PLLs and synthesizers. The book comprises six papers on each topic written by international experts. These papers are tutorial in nature and together make a substantial contribution to improving the design of analogue circuits. The book is divided into three parts: Part I, RF analogue-to-digital converters, the application of digital techniques to process analog modulated rf signals in radio receivers requires high linearity and high-resolution analogue-to-digital converters. In portable applications these converters must have an extremely low-power consumption to allow a long standby time. In low-cost signal processing applications these converters are combined with a digital signal processing system onto a single chip. Today digital signal processing systems use advanced CMOS technologies requiring the analogue-to-digital converter to be implemented in the same (digital) technology. Such an implementation requires special circuit techniques.Part II, sensor and actuator interfaces, interfaces for sensors and actuators shape the gates through which information is acquired from the real world into digital information systems, and vice versa. The interfaces should include analogue signal conditioning, analogue-to-digital conversion, digital bus interfaces and data-acquisition networks. To simplify the use of data-acquisition systems additional features should be incorporated, like self-test, and calibration. To make these goals economically feasible, these functions should be integrated, preferably with the sensor, on a single chip. This part describes the latest techniques in sensor and actuator interface design. Part III, low-noise oscillators, PLLs and synthesizers, the phase noise of the receiver's local oscillator limits the immunity against interfering signals. Therefore it has become the most important specification of the local oscillators of all integrated transceivers. Frequency synthesizers for digital tuning in portable radios require extremely low phase noise for the same reason. This part describes designs and architectures which give rise to very low phase noise.The text is a reference source for analogue design engineers and researchers wishing to keep abreast of developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course. This volume of "Analog Circuit Design" concentrates on three topics: RF analog-to-digital converters; sensor and actuator interfaces; and low-noise oscillators, PLLs and synthesizers. The text is a reference source for analogue design, both for engineers and researchers and advanced students. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Nº de ref. del artículo: 9780792399681
Cantidad disponible: 1 disponibles
Librería: Ria Christie Collections, Uxbridge, Reino Unido
Condición: New. In. Nº de ref. del artículo: ria9780792399681_new
Cantidad disponible: Más de 20 disponibles
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Buch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book contains the extended and revised versions of the talks of all speakers presented at the sixth AACD Workshop held in Villa Olmo, April 2-4 1997 Como, Italy. The local chairman was Pietro Erratico and the organization was performed by Isabella De Quattro both of SGS Thomson Microelectronics Cornareda and Agrate Brianza Italy. The program consisted of six tutorials per day during three days. These tutorials were presented by experts in the field to give state of the art information. Program topics for the following workshop are selected by the audience at the end of the workshop. The program committee, consisting of 10han Huijsing of Delft University of Technology, Willy Sansen of Katholieke Universiteit Leuven and Rudy van de Plassche of Philips Research Labs and University of Technology Eindhoven elaborates the selected topics into a three day program and selects the experts in the field for presentation. Each AACD Workshop has given rise to the publication of a book by Kluwer entitled 'Analog Circuit Design'. This series of six books in a row provides a valuable overview of all analog circuit techniques concerning design, CAD, simulation and device modeling and can be seen as a reference to those involved in analog circuits. 432 pp. Englisch. Nº de ref. del artículo: 9780792399681
Cantidad disponible: 2 disponibles
Librería: moluna, Greven, Alemania
Gebunden. Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Part I: RF Analog-to-Digital Converters. Introduction. Design of a Silicon Bipolar Track&Hold IC for 1gsample/s and 10 bit Linearity over the Full Nyquist Band T. Baumheinrich, et al. Power and Scaling Rules of CMOS High-Speed A/D Converters A.G.W. Ve. Nº de ref. del artículo: 5971850
Cantidad disponible: Más de 20 disponibles
Librería: Books Puddle, New York, NY, Estados Unidos de America
Condición: New. pp. 432. Nº de ref. del artículo: 26300702
Cantidad disponible: 4 disponibles
Librería: Majestic Books, Hounslow, Reino Unido
Condición: New. Print on Demand pp. 432 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam. Nº de ref. del artículo: 7547201
Cantidad disponible: 4 disponibles
Librería: Biblios, Frankfurt am main, HESSE, Alemania
Condición: New. PRINT ON DEMAND pp. 432. Nº de ref. del artículo: 18300692
Cantidad disponible: 4 disponibles