Cast Bullets; A Publication of the National Rifle Association of America

Editorial: National Rifle Association of America, Washington DC, 1979

  • Primera edición
  • Tapa blanda
  • Usado
Ver todos los detalles
Vendedor patrimonial

Librería: Ground Zero Books, Ltd., Silver Spring, MD, Estados Unidos de AmericaGround Zero Books, Ltd.

Vendedor de 5 estrellas

Vendedor de AbeBooks desde 14 de agosto de 1998

Ver los artículos de este vendedor
Tapa blanda

Condición: Usado - Bueno

EUR 199,80

Envío por EUR 4,31 
Se envía dentro de Estados Unidos de America

Cantidad disponible: 1 disponibles

Añadir al carrito
Devoluciones gratuitas de 30 días

Descripción del artículo del vendedor

144 pages. Illustrations. Subject Index. Footnotes. Includes Introduction and Foreword. Contains a four-part series on Cast Bullets in Rifles; also contains articles on Measuring the Hardness of Cast Bullets; .45 ACP Handload Accuracy; Bore Leading; Using Gang Molds; Refinements in Cast Bullets; and many other topics. This handbook collects the most significant findings on cast bullets in smokeless powder rifles and handguns, principally obtained in a systematic investigation of the subject, and published by the American Rifleman beginning in December 1957. Among the contributors are: William C. Davis, Jr., Robert Sears, Dennis Marshall, Musselman, Carl Johnson, Gale Asch, Leon Day, Carl Oeder, Fred Gettings, Eric Farr, Clark Campbell, and Douglas Tooley. A cast bullet is made by allowing molten metal to solidify in a mold. Most cast bullets are made of lead alloyed with tin and antimony; but zinc alloys have been used when lead is scarce, and may be used again in response to concerns about lead toxicity. Most commercial bullet manufacturers use swaging in preference to casting, but bullet casting remains popular with handloaders. Contents 1 History 2 Cast bullet advantages 3 Safety 4 Bullet shapes 5 Gas checks 6 Bullet lubrication 7 Bullet alloys 8 Heat treating 9 Paper-patched bullets 10 Notes 11 References Firearms projectiles were being cast in the 14th century. Iron was used for cannon, while lead was the preferred material for small arms. Lead was more expensive than iron, but it was softer and less damaging to the relatively weak iron barrels of early muskets. Lead could be cast in a ladle over a wood fire used for cooking or home heating, while casting iron required higher temperatures. Greater density of lead allowed lead bullets to retain velocity and energy better than iron bullets of the same weight and initial firing velocity.[2] Swaging, rather than casting, became a preferred manufacturing technique during the 19th century industrial revolution; but cast bullets remained popular in early rimmed black powder cartridges like the .32-20 Winchester, .32-40 Ballard, .38-40 Winchester, .38-55 Winchester, .44-40 Winchester, .45 Colt, and .45-70. Disadvantages became evident as loadings shifted to smokeless powder in the late 19th century. Higher velocity smokeless powder loadings caused lead to melt and be torn from soft bullets to remain in the barrel after firing in small deposits called leading. Manufacturers of high-velocity military ammunition modified their bullet swaging process to apply a thin sheet of stronger metal over the soft lead bullet.[3] Although it took several decades to devise bullet jacket alloys and manufacturing procedures to duplicate the accuracy of cast bullets at lower velocities; jacketed bullets were more accurate at the velocity of 20th century military rifle cartridges.[4] Jacketed bullets also functioned more reliably and are less likely to be deformed in the mechanical loading process of self-loading pistols and machine-guns. First Edition thus, presumed first printing.

N° de ref. del artículo 79875

Detalles bibliográficos

Título
Cast Bullets; A Publication of the National Rifle Association of America
Autor
Harrison, Col. E. H., USA (ret.)
Editorial
National Rifle Association of America, Washington DC
Año de publicación
1979
Estado
Very good
Encuadernación
Trade paperback
Edición
1ª Edición

Ground Zero Books, Ltd.

Silver Spring, MD, Estados Unidos de America

Vendedor de 5 estrellas

Vendedor de AbeBooks desde 14 de agosto de 1998

Tarifas de envío en Estados Unidos de America

ArtículoDe 5 a 20 días hábilesDe 3 a 6 días hábiles
Primer artículoEUR 4,31EUR 6,47
Los plazos de entrega los establecen los vendedores y varían según el transportista y la ubicación. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relación con cargos adicionales para cubrir cualquier aumento en los costes de envío de los artículos.

Métodos de pago

  • Visa
  • Mastercard
  • American Express
  • Carte Bleue
  • Apple Pay
  • Google Pay
  • Cheque
  • Factura
  • Giro postal
  • PayPal

Descripción de la tienda

Founded and operated by trained historians, Ground Zero Books, Ltd., serves the book collector, the scholar, and institutions. We focus on the individual, and pride ourselves on our personal service. Please contact us with your wants, as we have many books not yet listed in our database.

Especialidad

Military History, Nuclear, American Revolution, Military Medicine, Vietnam, World War II, British Empire, World War I, Unit Histories, Civil War

Información empresarial del vendedor

Ground Zero Books, Ltd.

9033 Georgia Avenue
Silver Spring, MD Estados Unidos de America 20910-2254