Publicado por Applied Science Publishers, 1975
ISBN 10: 0853346003 ISBN 13: 9780853346005
Idioma: Inglés
Librería: NEPO UG, Rüsselsheim am Main, Alemania
EUR 12,85
Cantidad disponible: 1 disponibles
Añadir al carritoGebundene Ausgabe. Condición: Gut. 500 Seiten ex Library Book aus einer wissenschaftlichen Bibliothek Sprache: Englisch Gewicht in Gramm: 550.
Librería: Lucky's Textbooks, Dallas, TX, Estados Unidos de America
EUR 52,77
Cantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New.
Librería: Ria Christie Collections, Uxbridge, Reino Unido
EUR 57,30
Cantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New. In.
Librería: Chiron Media, Wallingford, Reino Unido
EUR 55,75
Cantidad disponible: 10 disponibles
Añadir al carritoPaperback. Condición: New.
EUR 79,34
Cantidad disponible: 2 disponibles
Añadir al carritoPaperback. Condición: Brand New. reprint edition. 520 pages. 8.00x5.01x1.05 inches. In Stock.
Publicado por Springer Netherlands, Springer Netherlands Mär 2014, 2014
ISBN 10: 9401098050 ISBN 13: 9789401098052
Idioma: Inglés
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
EUR 53,49
Cantidad disponible: 2 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. Neuware -It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 520 pp. Englisch.
EUR 50,35
Cantidad disponible: 5 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. Structure and Properties of Oriented Polymers | I. Ward | Taschenbuch | xv | Englisch | 2014 | Springer | EAN 9789401098052 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Publicado por Springer Netherlands, Springer Netherlands, 2014
ISBN 10: 9401098050 ISBN 13: 9789401098052
Idioma: Inglés
Librería: AHA-BUCH GmbH, Einbeck, Alemania
EUR 59,97
Cantidad disponible: 1 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible.
EUR 250,30
Cantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New.
Librería: Ria Christie Collections, Uxbridge, Reino Unido
EUR 296,42
Cantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New. In.
Librería: Ria Christie Collections, Uxbridge, Reino Unido
EUR 296,42
Cantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New. In.
EUR 218,11
Cantidad disponible: 1 disponibles
Añadir al carritoCondición: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.
Librería: Books Puddle, New York, NY, Estados Unidos de America
EUR 346,49
Cantidad disponible: 1 disponibles
Añadir al carritoCondición: New. pp. 552 2nd Edition.
EUR 294,19
Cantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New.
Publicado por Springer Netherlands, Springer Netherlands Okt 1997, 1997
ISBN 10: 0412608804 ISBN 13: 9780412608803
Idioma: Inglés
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Original o primera edición
EUR 299,59
Cantidad disponible: 2 disponibles
Añadir al carritoBuch. Condición: Neu. Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 552 pp. Englisch.
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, Irlanda
EUR 361,36
Cantidad disponible: 15 disponibles
Añadir al carritoCondición: New. The understanding of the structure and properties of polymers in the oriented state is important in the field of polymer science and technology. This work discusses the various scientific advances that have been made in this area. It focuses on the methodologies available for characterizing oriented polymers and their mechanical behaviour. Editor(s): Ward, I. M. Num Pages: 536 pages, biography. BIC Classification: PNNP; TDCP. Category: (P) Professional & Vocational; (XV) Technical / Manuals. Dimension: 234 x 156 x 30. Weight in Grams: 945. . 1997. 2nd ed. 1997. Hardback. . . . .
EUR 375,52
Cantidad disponible: 1 disponibles
Añadir al carritoCondición: New. pp. 552 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.
EUR 305,05
Cantidad disponible: 5 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. Structure and Properties of Oriented Polymers | Ian M. Ward | Taschenbuch | xi | Englisch | 2012 | Springer | EAN 9789401064699 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Publicado por Springer Netherlands, Springer Netherlands, 1997
ISBN 10: 0412608804 ISBN 13: 9780412608803
Idioma: Inglés
Librería: AHA-BUCH GmbH, Einbeck, Alemania
EUR 312,03
Cantidad disponible: 1 disponibles
Añadir al carritoBuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.
EUR 375,83
Cantidad disponible: 1 disponibles
Añadir al carritoCondición: New. pp. 552.
Publicado por Springer Netherlands, Springer Netherlands, 2012
ISBN 10: 9401064695 ISBN 13: 9789401064699
Idioma: Inglés
Librería: AHA-BUCH GmbH, Einbeck, Alemania
EUR 357,33
Cantidad disponible: 1 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.
Librería: Mispah books, Redhill, SURRE, Reino Unido
EUR 421,08
Cantidad disponible: 1 disponibles
Añadir al carritoHardcover. Condición: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de America
EUR 451,04
Cantidad disponible: 15 disponibles
Añadir al carritoCondición: New. The understanding of the structure and properties of polymers in the oriented state is important in the field of polymer science and technology. This work discusses the various scientific advances that have been made in this area. It focuses on the methodologies available for characterizing oriented polymers and their mechanical behaviour. Editor(s): Ward, I. M. Num Pages: 536 pages, biography. BIC Classification: PNNP; TDCP. Category: (P) Professional & Vocational; (XV) Technical / Manuals. Dimension: 234 x 156 x 30. Weight in Grams: 945. . 1997. 2nd ed. 1997. Hardback. . . . . Books ship from the US and Ireland.
Librería: BennettBooksLtd, San Diego, NV, Estados Unidos de America
EUR 678,08
Cantidad disponible: 1 disponibles
Añadir al carritohardcover. Condición: New. In shrink wrap. Looks like an interesting title!
Publicado por Springer Netherlands Mär 2014, 2014
ISBN 10: 9401098050 ISBN 13: 9789401098052
Idioma: Inglés
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
EUR 53,49
Cantidad disponible: 2 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible. 520 pp. Englisch.
Librería: moluna, Greven, Alemania
EUR 48,37
Cantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give .
Publicado por Springer Netherlands Nov 2012, 2012
ISBN 10: 9401064695 ISBN 13: 9789401064699
Idioma: Inglés
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
EUR 277,13
Cantidad disponible: 2 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas. 552 pp. Englisch.
Publicado por Springer Netherlands Okt 1997, 1997
ISBN 10: 0412608804 ISBN 13: 9780412608803
Idioma: Inglés
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
EUR 299,59
Cantidad disponible: 2 disponibles
Añadir al carritoBuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas. 552 pp. Englisch.
Librería: preigu, Osnabrück, Alemania
EUR 259,55
Cantidad disponible: 5 disponibles
Añadir al carritoBuch. Condición: Neu. Structure and Properties of Oriented Polymers | Ian M. Ward | Buch | xi | Englisch | 1997 | Springer | EAN 9780412608803 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.
Publicado por Springer Netherlands, Springer Netherlands Nov 2012, 2012
ISBN 10: 9401064695 ISBN 13: 9789401064699
Idioma: Inglés
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
EUR 353,09
Cantidad disponible: 1 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 552 pp. Englisch.