monitoring controlling substation using de gundlapalli satheesh (12 resultados)

Paperback. Condición: new. Paperback. This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.

Condición: New. In.

Condición: New.

Paperback. Condición: new. Paperback. This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Paperback. Condición: new. Paperback. This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Taschenbuch. Condición: Neu. Neuware -This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit.Books on Demand GmbH, Überseering 33, 22297 Hamburg 80 pp. Englisch.

PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Condición: New. Print on Demand.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 80 pp. Englisch.

Condición: New. PRINT ON DEMAND.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit.