methodology modeling simulation microsystems de romanowicz bartlomiej (38 resultados)

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,500grams, ISBN:9780792383062.

Hardcover. Condición: Good. Used Texts May Have Used Book Stickers on the Cover. Used texts may NOT contain supplemental materials such as CD's, info-trac, access codes, etc. Satisfaction Guaranteed!

Condición: Very Good. Former library book; may include library markings. Used book that is in excellent condition. May show signs of wear or have minor defects.

Condición: New.

Condición: New.

Hardcover. Condición: new. Hardcover. Over the last two decades of the 20th century, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modelling and simulation of microsystems.This text gives an overview of the problems associated with modelling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems. Over the past two decades, technologies for microsystems fabrication have made considerable progress. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems. Over the past two decades, technologies for microsystems fabrication have made considerable progress. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. In.

Condición: New.

Condición: New. In.

Condición: New. pp. 168 Index.

Condición: New. pp. 168 Index.

Condición: New. 2012. Paperback. . . . . .

Condición: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Condición: As New. Unread book in perfect condition.

Condición: New. This text gives an overview of the problems associated with modelling and simulation of microsystems. It introduces a new methodology, which is supported by several examples, and should provide a useful starting point for both scientists and engineers seeking background information. Series: Microsystems. Num Pages: 136 pages, biography. BIC Classification: TJFD. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (XV) Technical / Manuals. Dimension: 234 x 156 x 11. Weight in Grams: 415. . 1998. Hardback. . . . .

Condición: New. 2012. Paperback. . . . . . Books ship from the US and Ireland.

Buch. Condición: Neu. Neuware -Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas.The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems.Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 168 pp. Englisch.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems.

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems.

Paperback. Condición: Like New. Like New. book.

Condición: New. This text gives an overview of the problems associated with modelling and simulation of microsystems. It introduces a new methodology, which is supported by several examples, and should provide a useful starting point for both scientists and engineers seeking background information. Series: Microsystems. Num Pages: 136 pages, biography. BIC Classification: TJFD. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (XV) Technical / Manuals. Dimension: 234 x 156 x 11. Weight in Grams: 415. . 1998. Hardback. . . . . Books ship from the US and Ireland.

Condición: As New. Unread book in perfect condition.

Hardcover. Condición: Like New. Like New. book.

Paperback. Condición: new. Paperback. Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems. Over the past two decades, technologies for microsystems fabrication have made considerable progress. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Hardcover. Condición: new. Hardcover. Over the last two decades of the 20th century, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modelling and simulation of microsystems.This text gives an overview of the problems associated with modelling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems. Over the past two decades, technologies for microsystems fabrication have made considerable progress. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Condición: Buone. inglese Condizioni dell'esterno: Buone Condizioni dell'interno: Ottime.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems. 168 pp. Englisch.