introduction properties engineering materials de pascoe (33 resultados)

Condición: Good. Used book that is in clean, average condition without any missing pages.

Paperback. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

paperback. Condición: Good. third edition Good paperback, bumped/creased with shelfwear; may have previous owner's name inside. Standard-sized.

Cloth. Condición: Good. Estado de la sobrecubierta: No Dust Jacket. 295 pp. Tightly bound. Corners not bumped. Call number on spine. Check out slip on back paste down. No other library stamps, names or markings. From the Franklin Institute Library. NOTE: EX-LIBRARY COPY.

Condición: Good. Ships from the UK. Used book that is in clean, average condition without any missing pages.

Condición: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned.

Condición: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Hardcover. Condición: Good. Estado de la sobrecubierta: No Dust Jacket. Second Edition. Exlibrary with usual library markings. Cover Wear. ; 394 pages.

Condición: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. Book contains pencil markings. In fair condition, suitable as a study copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,850grams, ISBN:0442302339.

Condición: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Book contains pencil markings. In fair condition, suitable as a study copy. Re-bound by library. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,850grams, ISBN:0442302339.

Hard Cover. Condición: Very Good. Reprint. Hard Cover. Very Good/Price Cl'd, Else Very Good. Reprint. Ex-Library. 8vo - over 7¾" - 9¾" tall. Call numbers painted on spine over mylar which covers d/j and is taped on, bar code on front over mylar, technical college stamp and Discard stamp on front endpage, blank date due slip on back of rear endpage, unused pocket on rear pastedown with library name stamps. Rust colored cloth. 295 pages. Ex-Library.

Hardcover. Condición: Very Good. Estado de la sobrecubierta: Good. Reprint. 8vo. Po's name to ffep. Dw has wear and a couple of small tears to edges. Fade to spine. Book.

Hardcover. Condición: UsedGood. Hardcover; surplus library copy with the usual stampings; reference number written on the spine; light fading and shelf wear to exterior; in good condition with clean text and tight binding. ASIN: B06X9L4QCT.

Hardcover. Condición: UsedGood. Hardcover; 2nd edition; surplus library copy with the usual stampings; reference number written on the spine; light fading, light shelf wear to exterior; information about book taped inside front cover; in good condition with clean text and tight binding.

Hardcover. Condición: Good. Estado de la sobrecubierta: Poor. 1st Edition. 1961 Blackie first edition hardback; good, light wear to boards, clean condition inside; review copy, has company stamps; fair unclipped dj has edge wear and tear and sellotape repairs; UK dealer, immediate dispatch.

Cloth. Condición: Very Good. Estado de la sobrecubierta: Poor. First Edition. VG, hardback, orange cloth covers with silver titles on spine faded to tan, ex-Royal Aircraft establishment Library, contents are clean and unmarked, 12mo 295pp. Weight 800g. Atomic structure; aggregation of atoms, fluid states, gases, liquids; aggregation of atoms, solids; crystal growth & size; aggregations of 2 sorts of atoms - binary alloys; equilibrium diagrams; Iron-Carbon system; thermal energy; deformation of metal single crystal; strengthening of metals; mechanical testing of polycrystalline materials; relationship of mechanical testing to design of engineering structure; heat treatment of steel; alloy steels; corrosion; welding; nucleus. Appendices on: important equilibrium diagrams; equilibrium & free energy; answers to numerical questions. Ex-Library.

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Re-bound by library. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,800grams, ISBN:

Terracotta Cloth. Condición: Very Good (AVERAGE). Estado de la sobrecubierta: Very Good (AVERAGE). With Diagrams & Charts Ilustrador. Reprint 1962. Please Email for further details Size: 8vo - over 7¾" - 9¾". Not Signed or Inscribed. HARDBACK.

Paperback. Condición: new. Paperback. The engineering designer is always limited by the properties of available materials. Some properties are critically affected by variations in com- position, in state or in testing conditions, while others are much less so. The engineer must know this if he is to make intelligent use of the data on properties of materials that he finds in handbooks and tables, and if he is to exploit successfully new materials as they become available. He can only be aware of these limitations if he understands how pro- perties depend on structure at the atomic, molecular, microscopic and macroscopic levels. Inculcating this awareness is one of the chief aims of the book, which is based on a successful course designed to give university engineering students the necessary basic knowledge of these various levels. The material is equivalent to a course of about eighty to a hundred lectures. In the first part of the book the topics covered are mainly fundamental physics. The structure of the atom, considered in non-wave-mechanical terms, leads to the nature of interatomic forces and aggregations of atoms in the three forms-gases, liquids and solids.Sufficient crystallography is discussed to facilitate an understanding of the mechanical behaviour of the crystals. The band theory of solids is not included, but the basic concepts which form a preliminary to the theory-energy levels of electrons in an atom, Pauli's exclusion principle, and so on-are dealt with. The engineering designer is always limited by the properties of available materials. The engineer must know this if he is to make intelligent use of the data on properties of materials that he finds in handbooks and tables, and if he is to exploit successfully new materials as they become available. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. In.

PF. Condición: New.

Condición: New.

Condición: New. Num Pages: 454 pages, biography. BIC Classification: TBN. Category: (P) Professional & Vocational. Dimension: 229 x 152 x 23. Weight in Grams: 663. . 1978. 1st Edition. paperback. . . . .

Paperback. Condición: Very Good. Very Good. book.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The engineering designer is always limited by the properties of available materials. Some properties are critically affected by variations in com position, in state or in testing conditions, while others are much less so. The engineer must know this if he is to make intelligent use of the data on properties of materials that he finds in handbooks and tables, and if he is to exploit successfully new materials as they become available. He can only be aware of these limitations if he understands how pro perties depend on structure at the atomic, molecular, microscopic and macroscopic levels. Inculcating this awareness is one of the chief aims of the book, which is based on a successful course designed to give university engineering students the necessary basic knowledge of these various levels. The material is equivalent to a course of about eighty to a hundred lectures. In the first part of the book the topics covered are mainly fundamental physics. The structure of the atom, considered in non-wave-mechanical terms, leads to the nature of interatomic forces and aggregations of atoms in the three forms-gases, liquids and solids. Sufficient crystallography is discussed to facilitate an understanding of the mechanical behaviour of the crystals. The band theory of solids is not included, but the basic concepts which form a preliminary to the theory-energy levels of electrons in an atom, Pauli's exclusion principle, and so on-are dealt with.

Condición: New. Num Pages: 454 pages, biography. BIC Classification: TBN. Category: (P) Professional & Vocational. Dimension: 229 x 152 x 23. Weight in Grams: 663. . 1978. 1st Edition. paperback. . . . . Books ship from the US and Ireland.

Paperback. Condición: new. Paperback. The engineering designer is always limited by the properties of available materials. Some properties are critically affected by variations in com- position, in state or in testing conditions, while others are much less so. The engineer must know this if he is to make intelligent use of the data on properties of materials that he finds in handbooks and tables, and if he is to exploit successfully new materials as they become available. He can only be aware of these limitations if he understands how pro- perties depend on structure at the atomic, molecular, microscopic and macroscopic levels. Inculcating this awareness is one of the chief aims of the book, which is based on a successful course designed to give university engineering students the necessary basic knowledge of these various levels. The material is equivalent to a course of about eighty to a hundred lectures. In the first part of the book the topics covered are mainly fundamental physics. The structure of the atom, considered in non-wave-mechanical terms, leads to the nature of interatomic forces and aggregations of atoms in the three forms-gases, liquids and solids.Sufficient crystallography is discussed to facilitate an understanding of the mechanical behaviour of the crystals. The band theory of solids is not included, but the basic concepts which form a preliminary to the theory-energy levels of electrons in an atom, Pauli's exclusion principle, and so on-are dealt with. The engineering designer is always limited by the properties of available materials. The engineer must know this if he is to make intelligent use of the data on properties of materials that he finds in handbooks and tables, and if he is to exploit successfully new materials as they become available. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.