finite rotations structural mechanics (21 resultados)

Paperback. Condición: Good. Estado de la sobrecubierta: No Dust Jacket. Lecture Notes in Engineering 19 library stickers and stamps on the bottom of the spine and on the FEP. pages are clean, bright and tight. Ex - Library, Usual Stamps.

Condición: BUONO USATO. Lecture Notes in Engineering INGLESE Atti del convegno "Euromech Colloquium 197" tenutosi nel 1985 a Jablonna, Polonia. Volume n. 19 di collana a cura di C. A. Brebbia e S. A. Orzag, copertina flessibile in cartoncino con lievi velature di polvere, modesta ombratura da lettura ai tagli, le pagine sono molto ben conservate, prive di imperfezioni e pulite. N. pag. XII (12) + 379. Totale n. 391.

paperback. Condición: Very Good. New York, 1986; red and black paper covers; mild corner and edge wear; 8vo - over 7 3/4" to 9 3/4" tall; Interior is clean and unmarked; Previous owner's name on title page; 379 pages.

Condición: New. In.

paperback. Condición: Good. exlibrary book rebound to a hardcover, usual library markings and stickers, light wear to cover and pages;

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The deformation near a material particle of the classical continuum is produced by successive superposition of a rigid-body translation, a pure stretch along principal directions of strain and a rigid-body ro tation of those directions. The rotational part of deformation is par ticularly important in the non-linear analysis of thin-walled solid structures such as ~eams, thin-walled bars, plates and shells, since in this case finite rotations may appear even if the strains are infinite simal. It seems that the research concerning the application of finite ro tations is carried out independently in different fields of structural mechanics. Theoretical and numerical methods developed and the results obtained for a particular type of the structure or for a particular ma terial behaviour not always are used to analyse similar problems for other types of structures or for another material behaviour. Since the research in this field had been growing rapidly, it was decided to organize an informal international meeting, under the auspi ces of the European Mechanics Co~mittee, entitled: Euromech Colloquium 197 'Finite Rotations in Structural Mechanics'. The meeting was held on 17 - 20 September 1985 in Jablonna, a small suburbian area of Warsaw.

Condición: New.

Condición: New.

Condición: New. SUPER FAST SHIPPING.

PF. Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. pp. 396.

Paperback. Condición: Brand New. reprint edition. 379 pages. 9.61x6.70x0.90 inches. In Stock.

Condición: Bon. Finite Rotations in Structural Mechanics | W. Pietraszkiewicz | Springer, 1986, in-8 broché, 379 pages. Couverture très légèrement passée. Dos solide. Intérieur frais. Exemplaire de bibliothèque : petit code barre en pied de 1re de couv., cotation au dos, rares et discrets petits tampons à l'intérieur de l'ouvrage. Bon exemplaire. [BT44+].

Condición: New.

Paperback. Condición: new. Paperback. The deformation near a material particle of the classical continuum is produced by successive superposition of a rigid-body translation, a pure stretch along principal directions of strain and a rigid-body ro tation of those directions. The rotational part of deformation is par ticularly important in the non-linear analysis of thin-walled solid structures such as ~eams, thin-walled bars, plates and shells, since in this case finite rotations may appear even if the strains are infinite simal. It seems that the research concerning the application of finite ro tations is carried out independently in different fields of structural mechanics. Theoretical and numerical methods developed and the results obtained for a particular type of the structure or for a particular ma terial behaviour not always are used to analyse similar problems for other types of structures or for another material behaviour. Since the research in this field had been growing rapidly, it was decided to organize an informal international meeting, under the auspi ces of the European Mechanics Co~mittee, entitled: Euromech Colloquium 197 "Finite Rotations in Structural Mechanics". The meeting was held on 17 - 20 September 1985 in Jablonna, a small suburbian area of Warsaw. The deformation near a material particle of the classical continuum is produced by successive superposition of a rigid-body translation, a pure stretch along principal directions of strain and a rigid-body ro tation of those directions. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. The deformation near a material particle of the classical continuum is produced by successive superposition of a rigid-body translation, a pure stretch along principal directions of strain and a rigid-body ro tation of those directions. The rotational part of deformation is par ticularly important in the non-linear analysis of thin-walled solid structures such as ~eams, thin-walled bars, plates and shells, since in this case finite rotations may appear even if the strains are infinite simal. It seems that the research concerning the application of finite ro tations is carried out independently in different fields of structural mechanics. Theoretical and numerical methods developed and the results obtained for a particular type of the structure or for a particular ma terial behaviour not always are used to analyse similar problems for other types of structures or for another material behaviour. Since the research in this field had been growing rapidly, it was decided to organize an informal international meeting, under the auspi ces of the European Mechanics Co~mittee, entitled: Euromech Colloquium 197 "Finite Rotations in Structural Mechanics". The meeting was held on 17 - 20 September 1985 in Jablonna, a small suburbian area of Warsaw. The deformation near a material particle of the classical continuum is produced by successive superposition of a rigid-body translation, a pure stretch along principal directions of strain and a rigid-body ro tation of those directions. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Condición: New. Print on Demand pp. 396 67:B&W 6.69 x 9.61 in or 244 x 170 mm (Pinched Crown) Perfect Bound on White w/Gloss Lam.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The deformation near a material particle of the classical continuum is produced by successive superposition of a rigid-body translation, a pure stretch along principal directions of strain and a rigid-body ro tation of those directions. The rotational part of deformation is par ticularly important in the non-linear analysis of thin-walled solid structures such as ~eams, thin-walled bars, plates and shells, since in this case finite rotations may appear even if the strains are infinite simal. It seems that the research concerning the application of finite ro tations is carried out independently in different fields of structural mechanics. Theoretical and numerical methods developed and the results obtained for a particular type of the structure or for a particular ma terial behaviour not always are used to analyse similar problems for other types of structures or for another material behaviour. Since the research in this field had been growing rapidly, it was decided to organize an informal international meeting, under the auspi ces of the European Mechanics Co~mittee, entitled: Euromech Colloquium 197 'Finite Rotations in Structural Mechanics'. The meeting was held on 17 - 20 September 1985 in Jablonna, a small suburbian area of Warsaw.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 396 pp. Englisch.

Condición: New. PRINT ON DEMAND pp. 396.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The deformation near a material particle of the classical continuum is produced by successive superposition of a rigid-body translation, a pure stretch along principal directions of strain and a rigid-body ro tation of those directions. The rotational part of deformation is par ticularly important in the non-linear analysis of thin-walled solid structures such as ~eams, thin-walled bars, plates and shells, since in this case finite rotations may appear even if the strains are infinite simal. It seems that the research concerning the application of finite ro tations is carried out independently in different fields of structural mechanics. Theoretical and numerical methods developed and the results obtained for a particular type of the structure or for a particular ma terial behaviour not always are used to analyse similar problems for other types of structures or for another material behaviour. Since the research in this field had been growing rapidly, it was decided to organize an informal international meeting, under the auspi ces of the European Mechanics Co~mittee, entitled: Euromech Colloquium 197 'Finite Rotations in Structural Mechanics'. The meeting was held on 17 - 20 September 1985 in Jablonna, a small suburbian area of Warsaw. 396 pp. Englisch.