9786139946051 - Study The Effect Of Machining Parameter For EDM Process de Adel, Mostafa; Hafedh, Nareen; Hiba Adil Ahmed, Aseil Mohammed (6 resultados)

Taschenbuch. Condición: Neu. Study The Effect Of Machining Parameter For EDM Process | Mostafa Adel (u. a.) | Taschenbuch | 64 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9786139946051 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.

Condición: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining. 64 pp. Englisch.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Adel MostafaMostafa Adel Abdullah born in Baghdad on February 26,1987 Education: Bsc and Msc in Production Engineering from Universality Of Technology, Baghdad-Iraq in 2009 and 2015 respectivelyElectrical discharge machining (ED.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 64 pp. Englisch.

Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining.