9780727741721 - designers' guide to eurocode 3: design of steel buildings second edition: en 1993-1-1, -1-3 and -1-8 (designers guides to eurocodes) de gardner, leroy; nethercot obe, david; gulvanessian cbe, haig (12 resultados)
- Tapa dura
Librería: AwesomeBooks, Wallingford, Reino UnidoAwesomeBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 46,44
Envío por EUR 4,82Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Very Good. Designers' Guide to Eurocode 3: Design of Steel Buildings, 2nd edition (Designers Guides to Eurocodes) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged…. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping.
Designers' Guide to Eurocode 3: Design of Steel Buildings, 2nd edition (Designers Guides to Eurocodes)
Leroy Gardner and David Nethercot (series editor Haig Gulvanessian)
- Tapa dura
Librería: Bahamut Media, Reading, Reino UnidoBahamut Media
Contactar con el vendedorVendedor de 5 estrellasCondición: Usado - Bueno
EUR 49,41
Envío por EUR 8,16Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.
- Tapa dura
Librería: GoldBooks, Denver, CO, Estados Unidos de AmericaGoldBooks
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 84,52
Envío por EUR 4,76Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardcover. Condición: new. New Copy. Customer Service Guaranteed.
- Más imágenes
- Tapa dura
Librería: Rarewaves.com USA, London, LONDO, Reino UnidoRarewaves.com USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 108,31
Gastos de envío gratisSe envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardback. Condición: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind an…d the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.
- Tapa dura
Librería: PBShop.store UK, Fairford, GLOS, Reino UnidoPBShop.store UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 112,20
Envío por EUR 5,87Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
HRD. Condición: New. New Book. Shipped from UK. Established seller since 2000.
Designers' Guide to Eurocode 3: Design of Steel Buildings Second edition: EN 1993-1-1, -1-3 and -1-8
- Tapa dura
Librería: THE SAINT BOOKSTORE, Southport, Reino UnidoTHE SAINT BOOKSTORE
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 111,12
Envío por EUR 21,66Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardback. Condición: New. New copy - Usually dispatched within 4 working days.
- Tapa dura
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 120,92
Envío por EUR 9,50Se envía de Irlanda a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. 2011. 2nd edition. Hardcover. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Series: Designers' Guides to Eurocodes. Num Pages: 172 pages, 80. BIC Classification: TNC. Category: (P) Professional & Vocational. Dimens…ion: 303 x 214 x 14. Weight in Grams: 784. . . . . .
- Tapa dura
Librería: Revaluation Books, Exeter, Reino UnidoRevaluation Books
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 120,10
Envío por EUR 14,61Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardcover. Condición: Brand New. 2nd edition. 161 pages. 12.00x8.50x0.50 inches. In Stock.
- Más imágenes
- Tapa dura
Librería: Rarewaves USA, OSWEGO, IL, Estados Unidos de AmericaRarewaves USA
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 150,39
Gastos de envío gratisSe envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardback. Condición: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind an…d the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.
- Tapa dura
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de AmericaKennys Bookstore
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 152,20
Envío por EUR 9,10Se envía dentro de Estados Unidos de AmericaCantidad disponible: 1 disponibles
Condición: New. 2011. 2nd edition. Hardcover. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Series: Designers' Guides to Eurocodes. Num Pages: 172 pages, 80. BIC Classification: TNC. Category: (P) Professional & Vocational. Dimens…ion: 303 x 214 x 14. Weight in Grams: 784. . . . . . Books ship from the US and Ireland.
- Más imágenes
- Tapa dura
Librería: Rarewaves.com UK, London, Reino UnidoRarewaves.com UK
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 111,13
Envío por EUR 75,97Se envía de Reino Unido a Estados Unidos de AmericaCantidad disponible: 1 disponibles
Hardback. Condición: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind an…d the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.
- Más imágenes
- Tapa dura
Librería: Rarewaves USA United, OSWEGO, IL, Estados Unidos de AmericaRarewaves USA United
Contactar con el vendedorVendedor de 5 estrellasCondición: Nuevo
EUR 153,33
Envío por EUR 43,31Se envía dentro de Estados Unidos de AmericaCantidad disponible: 2 disponibles
Hardback. Condición: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind an…d the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.
