Maker community llc (47 resultados)

• Tapa blanda

Cantidad disponible: 5 disponibles

Softcover. Condición: New. Special order direct from the distributor.

• Tapa blanda

Cantidad disponible: 8 disponibles

Softcover. Condición: New. Special order direct from the distributor.

• Tapa blanda

Cantidad disponible: 5 disponibles

Softcover. Condición: New. Special order direct from the distributor.

• Tapa blanda

Cantidad disponible: 2 disponibles

Softcover. Condición: New. Special order direct from the distributor.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. The Mintduino is another wonderful product in the Maker Shed s Mintronics series of kits. It s perfect for anyone interested in learning, or teaching, the fundamentals of how microcontrollers work.&Uumlber den AutorrnrnJim Kelly was.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. This full-color, illustrated handbook uses comic book-style panels to explain the basics of using a breadboard then it walks you through ten fun and educational projects. You ll learn-by-doing as you study the circuit diagrams and colorful drawings. Jody Culkin (ilustrador).

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. &Uumlber den AutorGordon McComb has written about amateur and educational robot building for 30 years, and has been called the father of hobby robotics by Make: Magazine. Gordon s bestselling book Robot Builder s Bon.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. &Uumlber den AutorrnrnCharles Platt is a contributing editor and regular columnist for Make: magazine, where he writes about electronics and tools. Platt was a senior writer for Wired magazine, has written various computer.

• Tapa blanda

Cantidad disponible: 1 disponibles

Kartoniert / Broschiert. Condición: New. &Uumlber den AutorrnrnMike Senese is the Executive Editor of Make: magazine. He is also a TV host, starring in various engineering and science shows for Discovery Channel, including Punkin Chunkin, How Stuff Works, and Catch It Kee.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Jumpstarting books provide an avenue for makers to quickly master topical knowledge! Each book starts with instructions on how to install or initialize the hardware or software needed to reach the Hello, World stage of getting started!&Uumlber de.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Jumpstarting books provide an avenue for makers to quickly master topical knowledge! Each book starts with instructions on how to install or initialize the hardware or software needed to reach the Hello, World stage of getting started!&Uumlber de.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. This hands-on book takes a look at four brilliant women -- Ada Lovelace, Anna Atkins, Hildegard Von Bingen, and Maria Telkes -- and the world-changing innovations they created. Walk in their footsteps as you discover how these women became inventors, learn .

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. KlappentextrnrnArduino 101 houses an Intel Curie module which offers a better performance at a lower power footprint. The module has two 32-bit MCUs - an x86 Intel Quark processor and an ARC EM4 processor along with 384kB flash memory an.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Learn about electricity while having fun! Lavishly illustrated with cartoons and drawings, this book guides the reader through six hands-on projects. Discover the electrical potential lurking in a stack of pennies - enough to light up an LED or power a calc.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Learning to be a maker has never been more fun. Full-color cartoons and drawings lead you through the steps needed for making a wizard wand, a sanding block, a charging station for your phone or tablet, and a sturdy box with a secret compartment.&Uu.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. This book contains tutorials about how to understand what drones can do, and projects about how to make your own flying craft, from some of the earliest practitioners in the field.&Uumlber den AutorMake: unites, inspires, in.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Kartoniert / Broschiert. Condición: New. You may have mastered Arduino and 3D printing, but what will you make when the power goes out? This book, featuring projects drawn from previous issues of Make: and Craft:, features projects you can build with little or no technology.&Uumlber den A.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. This book will teach you how to really harness the power of the micro:bit. You ll learn about sensors, Bluetooth communications, and embedded operating systems, and along the way you ll develop an understanding of the next big thing in computers: the Intern.

• Tapa blanda

Cantidad disponible: 1 disponibles

Condición: New. The book is written in a casual, conversational style. It is easily accessible to those who have no prior knowledge in 3D printing, yet the book s message is solidly practical, technically accurate, and consumer-relevant. The chapters include contemporary, .

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Kartoniert / Broschiert. Condición: New. Want to make something that can fly? How about a flying robot? In this book, you ll learn how drones work, how to solve some of the engineering challenges a drone presents, and how to build your own--an autonomous quadcopter that you can build, customize, a.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. The author draws on more than 20 years of experience doing hands-on science to facilitate tinkering: learning science while fooling around with real things. Updated with new photographs and in full color, this new edition is even more accessible to young ma.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Linux for Makers is the first book that explains the Linux operating system specifically for Makers, as opposed to programmers and administrators. By gaining a deeper understanding of Linux, Makers can add another useful tool to their kit that will help the.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Creating new instruments is much more than an art form. When you want to make a note sound higher or lower, you have to change the sound waves coming out of the instrument. That s science! When you explore the way different materials produce different sound.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Illustrated in full color with hundreds of photographs and line drawings, the book serves as a perfect introduction to workshop tools and materials for young adults and adults alike. Platt focuses on basic hands tools and assumes no prior experience or know.

• Tapa blanda

Cantidad disponible: 2 disponibles

Condición: New. &Uumlber den AutorKathy Ceceri is an award-winning writer and educator, and the author of more than a dozen books of hands-on STEAM activities for kids, teens, and adults. Her favorite projects are built around ordinary crafts and ho.

• Tapa blanda

Cantidad disponible: 2 disponibles

Condición: New. Learn robotics through magic, or enhance your magic with robotics! This book is a beginner s guide to creating robotics-infused magic, with a dedication to accessibility -- cardboard meets Arduino meets magic! All ages, backgrounds, and abilities will find .

• Tapa blanda

Cantidad disponible: 3 disponibles

Condición: New. The Raspberry Pi is a credit card-sized computer that plugs into your TV and a keyboard. It is a capable little computer which can be used in electronics projects, and for many of the things that your desktop PC does, like spreadsheets, word processing, bro.

• Tapa blanda

Cantidad disponible: 2 disponibles

Kartoniert / Broschiert. Condición: New. Getting Started with CNC is the definitive introduction to working with affordable desktop and benchtop CNCs, written by the creator of the popular open hardware CNC, the Shapeoko.&Uumlber den AutorrnrnEdward Ford is a Maker. He was.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. The book is perfect for makers new to leatherworking, as well as experienced leatherworkers who want to understand how to integrate new digital fabrication tools into their workbench. Written by an experienced leatherworker and programmer, this is a resourc.

• Tapa blanda

Cantidad disponible: Más de 20 disponibles

Condición: New. Zero to Genetic Engineering Hero is made to provide you with a first glimpse of the inner-workings of a cell. It further focuses on skill-building for genetic engineering and the Biology-as-a-Technology mindset (BAAT).&Uumlber den Autor.