u s army engineer school (157 resultados)

Condición: As New. Unread book in perfect condition.

Soft cover. Condición: Good. 252 pp. Illustrated. Slight water stain bottom tip of last pages. Slight soiling on covers. Near very good copies.

Condición: New.

Paperback. Condición: New.

Condición: New. General Engineering: The Official U.S. Army Field Manual FM 3-34.400 (FM 5-104), 2008 revision (Paperback or Softback).

Soft cover. Condición: Very Good. 1st Edition. Offered is a first edition, first printing, of "Bridge Recon [Reconnaissance]: GTA 5-7-10 To Be Used With ARTEP Task Number 5-19" published in January 1981 by the United States Army Engineer School out of Fort Belvoir, Virginia. A stapled softcover measuring 5" by 7" and containing 36 pages including front and rear covers. With illustrations of an Army officer instructing a Squad leader ("OK, Squad leader, you've got your mission. Now, how to HANDLE IT!"), topics include: Planning for Training; ARTEP Training Objective; Mission; The Hasty Recon; The Deliberate Recon; Site Plan Layout; Bridge Reconnaissance Information Sheet; Critical Member; Critical Span; Conduct of the Recon; Reserve Components. Staples lightly age-rusted; covers show light outer corner wear.

Condición: As New. Unread book in perfect condition.

Condición: New.

Paperback or Softback. Condición: New. Military Soils Engineering: The Official U.S. Army / U.S. Marine Corps Technical Manual TM 3-34.6 / McRp 3-17.7g. Book.

Staplebound. 147 pgs. Engineer School Text with many illustrations. Good stapled softcover copy. Fragile at the staples.(797).

Condición: As New. Unread book in perfect condition.

Condición: New.

Paperback. Condición: New.

Softcover/Paperback. Condición: Very Good. Issued five years after the original ST 5-260-1A, this "Student Handout" compiles errata sheets correcting and updating data in the Nonstandard Military Fixed Bridges special text. Changes include revised load classification tables, corrections to figure references, and clarifications of design assumptions for certain bridge types. The handout was distributed to students in bridging courses and inserted into earlier copies of the main text to keep classroom material current with evolving engineer doctrine. Because many copies of ST 5-260-1A were not preserved with their errata, stand-alone handouts such as this one are relatively uncommon and of interest to collectors seeking complete, technically accurate sets.

Softcover/Paperback. Condición: Very Good. This Fort Belvoir student outline provides the structured syllabus for the Engineer Officer Career Course module on fixed military bridges. It organizes lesson objectives, required readings, and practical exercises covering bridge classification, design checks, and construction planning for tactical and semi-permanent structures. Topics include reconnaissance of crossing sites, evaluation of existing highway and railroad bridges, and coordination with non-engineer units for traffic control.

Softcover/Paperback. Condición: Very Good. Includes fold out car, annex to fold out card with booklet. Instructor reference manual produced by the U.S. Army Engineer School detailing the fundamentals of constructing fixed bridge structures for military engineering units. Part 1 of an eight-part series, it covers foundational troop construction concepts, measurements, definitions and classification criteria used for fixed bridging. Illustrated with technical diagrams and example charts, this manual reflects Cold War-era Army Reserve training doctrine for engineer units and was distributed to instructors during the 196162 ADT cycle at Fort Belvoir. Published under Army supervision, this text supported Reserve Component training for Combat Engineer and Bridge Company personnel.

Softcover/Paperback. Condición: Good. This is the primary problem-solving workbook for the Engineer School's Soils Engineering course E.022, used in conjunction with reference texts and advance sheets. The workbook contains structured exercises on soil classification, Atterberg limits, modified AASHO compaction tests, CBR testing, frost-susceptible soils, and the design of subgrades and base courses for heavy-duty roads and airfields. Students fill in data sheets, compute dry densities and optimum moisture contents, and interpret test curves with direct application to field construction. The material reflects the U.S. Army's drive to standardize geotechnical design procedures across worldwide theaters just as large airfield and road projects were ramping up in Europe and Southeast Asia. Some staining and age spots on lower front cover and spine.

Softcover/Paperback. Condición: Very Good. Fold out charts and maps intact, good black and white period in the field photos, etc. One of several coordinated Soils Engineering texts used at Fort Belvoir, this September 1961 "Student Reference" volume supports intermediate chapters of the E.022 engineering soils course. It summarizes soil classification systems, compaction theory, bearing-capacity calculations, and design of subgrades and base courses for roads and airfields. Tables and nomographs allow rapid field design using California Bearing Ratio (CBR) tests and other standard Army procedures. When issued, it complemented a student workbook and advance sheets that guided problem-solving and lab work, preparing engineer officers and NCOs for supervision of earthwork projects worldwide.

Softcover/Paperback. Condición: Good. Foldout chart intact with no writing or marks, some age spots on cover. This February 1962 advance sheet supplements the broader E.022 soils-engineering curriculum, presenting updated computations, field formulas, and preparatory reading for lab sessions. Topics include frost-action soils, soil stabilization with additives, and advanced CBR-based design for subgrades and pavements. Students used the sheets before classroom instruction to standardize mathematical preparation and ensure uniform technical understanding across classes.

Softcover/Paperback. Condición: Very Good. Prepared as part of the Engineer Officer Orientation Course, this 1960 Fort Belvoir manual introduces junior officers to the fundamentals of fixed bridging. It outlines the organization and capabilities of engineer units, the role of fixed bridges in lines of communication, and the distinction between standard military bridging sets and fixed, semi-permanent structures. Lesson sections discuss loading classifications, site selection, abutment and pier design, and coordination with civilian agencies in occupied or allied territories.

Paperback. Condición: New.

Paperback. Condición: Very Good. ***please read*** loose leaf papers stapled to inside cover pages - Edition 2 - no marks on text - my shelf location 21-B*.

Condición: New.

Condición: As New. Unread book in perfect condition.

Softcover/Paperback. Condición: Good. Produced for the Engineer Officer and enlisted construction courses, this May 1961 Fort Belvoir workbook covers theory and operation of rock-crushing plants, air compressors, and material-handling equipment. It explains plant layouts, throughput calculations, and safety precautions for quarry operations, then moves to compressor sizing, hose systems, and air-tool support. The lifting and loading section treats cranes, loaders, and rigging required to support road, airfield, and bridge projects. The manual was intended to prepare engineer troops for deployment to remote construction sites where units had to establish and maintain their own aggregate sources.

Softcover/Paperback. Condición: Very Good. Super photos on every page, informative, interesting at the height of the cold war. Internal training workbook issued by the U.S. Army Engineer School at Fort Belvoir for instruction in preventive maintenance of engineer equipment. The November 1961 "Annex A" volume introduces core concepts of the Army Maintenance System and indicator-style inspection routines for vehicles, generators, compressors, and other construction machinery used by engineer units. Exercises walk students through interpreting maintenance forms, spotting abnormal trends, and scheduling services before failures occur. Created at the height of the Cold War, it reflects the U.S. Army's emphasis on readiness and reliability for heavy equipment deployed worldwide. Surviving copies typically show instructor markings and student notes, adding provenance from specific engineer courses.

Softcover/Paperback. Condición: Very Good. Seldom seen black and white photos during a period of expanding global engineer deployments, the manual captures early mechanized earthmoving doctrine. Issued July 1961 for engineer equipment courses, this manual explains the theory, operation, maintenance, and capabilities of bulldozers, graders, scrapers, rollers, and trenching machinery. It emphasizes production-rate estimation, soil behavior under compaction, detailed equipment diagrams, and maintenance schedules crucial for overseas construction missions.

PF. Condición: New.

Soft cover. Condición: Very Good. Softcover with illustrated cover. Title page dated February 1973. No evident copyright page, but February 1973 on the inside of the front cover. 52 pages. Very Good condition. Pages clean and unmarked. Various illustrations along with concepts. Please contact us with questions or if you'd like to see photographs.

Condición: New.