Publicado por Gordon & Breach Science Publishers SA, 1999
Librería: PsychoBabel & Skoob Books, Didcot, Reino Unido
EUR 42,84
Convertir monedaCantidad disponible: 1 disponibles
Añadir al carritopaperback. Condición: Very Good. Estado de la sobrecubierta: No Dust Jacket. Paperback in very good condition. Light edge wear on covers. Minor pen on front cover. Pages are clean and contents are clear throughout. HCW. Used.
Librería: Ria Christie Collections, Uxbridge, Reino Unido
EUR 182,81
Convertir monedaCantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New. In.
Publicado por Springer US, Springer US, 2010
ISBN 10: 1441936041 ISBN 13: 9781441936042
Idioma: Inglés
Librería: AHA-BUCH GmbH, Einbeck, Alemania
EUR 217,46
Convertir monedaCantidad disponible: 1 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics:Part A: Applications and devices with electroceramic-based MEMS:Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devicesMEMS for optical functionality Part B: Materials, fabrication technology, and functionality:Ceramic thick films for MEMS Piezoelectric thin films for MEMSMaterials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramicsSoft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field.The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added.
Librería: Ria Christie Collections, Uxbridge, Reino Unido
EUR 233,65
Convertir monedaCantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New. In.
EUR 233,96
Convertir monedaCantidad disponible: 1 disponibles
Añadir al carritoCondición: New. pp. 428.
EUR 244,11
Convertir monedaCantidad disponible: 1 disponibles
Añadir al carritoCondición: New. pp. 428 Illus.
EUR 227,74
Convertir monedaCantidad disponible: Más de 20 disponibles
Añadir al carritoGebunden. Condición: New. There are a number of excellent books and handbooks on state of art MEMS technology and applications but there is no book yet (and very few book chapters) on MEMS with functional ceramic films. This is an emerging field and captures much interest but onl.
Publicado por Springer US, Springer US Dez 2010, 2010
ISBN 10: 1441936041 ISBN 13: 9781441936042
Idioma: Inglés
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
EUR 213,99
Convertir monedaCantidad disponible: 2 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. Neuware -The concept of micromachining of silicon to form micron-scale structures such as cantilevers, free-standing bridges, membranes, and channels and its combination with microelectronics fabrication methodology and technology has resulted in the em- gence of a new category of functional systems called MEMS (microelectomechanical systems). MEMS are miniature systems containing devices or arrays of devices that combine electronics with other components such as sensors, transducers and actuators, and are fabricated by IC (Integrated Circuits) batch processing techniques. The eld of electroceramics (inorganic, non-metallic materials, often polycr- talline, with useful electrical and other functional properties) provides a vast number of active materials for sensors, actuators, and electrical and electronic components. Electroceramic thin lms can add therefore many useful functionalities to MEMS. At the same time, because the fabrication of ceramics is commonly a high temperature process that often necessitates an oxygen containing atmosphere, because most cer- ics are inert and corrosion resistant, and because the properties of electroceramics are verysensitivetotheprocessingconditions,theintegrationofelectroceramiclayersonto silicon or other substrates and their patterning into functional elements need complex technologies that are still under development. This situation is re ected in the current positionofelectroceramic-basedMEMSinthemarket:Whilethepotentialisexcellent, rst devices are being commercialized only these present days.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 428 pp. Englisch.
EUR 252,38
Convertir monedaCantidad disponible: 1 disponibles
Añadir al carritoCondición: New. pp. 428.
Librería: Lucky's Textbooks, Dallas, TX, Estados Unidos de America
EUR 209,29
Convertir monedaCantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New.
Librería: Lucky's Textbooks, Dallas, TX, Estados Unidos de America
EUR 209,55
Convertir monedaCantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New.
Librería: Mispah books, Redhill, SURRE, Reino Unido
EUR 298,13
Convertir monedaCantidad disponible: 1 disponibles
Añadir al carritoHardcover. Condición: Like New. Like New. book.
Librería: AHA-BUCH GmbH, Einbeck, Alemania
EUR 318,78
Convertir monedaCantidad disponible: 2 disponibles
Añadir al carritoBuch. Condición: Neu. Neuware - The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics:Part A: Applications and devices with electroceramic-based MEMS:Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devicesMEMS for optical functionality Part B: Materials, fabrication technology, and functionality:Ceramic thick films for MEMS Piezoelectric thin films for MEMSMaterials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramicsSoft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field.The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added.
Librería: Mispah books, Redhill, SURRE, Reino Unido
EUR 326,23
Convertir monedaCantidad disponible: 1 disponibles
Añadir al carritoPaperback. Condición: Like New. Like New. book.
Librería: moluna, Greven, Alemania
EUR 181,53
Convertir monedaCantidad disponible: Más de 20 disponibles
Añadir al carritoCondición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. There are a number of excellent books and handbooks on state of art MEMS technology and applications but there is no book yet (and very few book chapters) on MEMS with functional ceramic films. This is an emerging field and captures much interest but onl.
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
EUR 213,99
Convertir monedaCantidad disponible: 2 disponibles
Añadir al carritoTaschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics:Part A: Applications and devices with electroceramic-based MEMS:Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devicesMEMS for optical functionality Part B: Materials, fabrication technology, and functionality:Ceramic thick films for MEMS Piezoelectric thin films for MEMSMaterials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramicsSoft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field.The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added. 428 pp. Englisch.